CERAMIC TRIMMER CAPACITOR – 3MM – SMD - SPECIAL Suntan ® FEATU R E S TSC3S ‧Ultra miniature size with external dimensions of 3.2(W) x 4.5(L) x 1.5(T)mm ‧Designed for reflow soldering ‧Lowest capacitance drift ‧Very good Q and high resonant frequency ‧Color coded case permits easy identification ‧Sealed construction prevents the penetration of Flux and Dust Chip Trimmer Capacitors, TSC3S Series, are miniature and ultra-thin type surface mounting device, and are recommended for miniaturization of electronic equipment. The capacity drift after adjustment is very low and having a very thin dustproof structure, these capacitors are most suited to the fine adjustment of items. The plastic is a high temperature liquid-crystal polymer with low dielectric loss and good mechanical strength. Ratings and Characteristics Part No Item Capacitance(pF Min) Capacitance(pF Max) TSC3S (5.7) Black TSC3S (5.7) Blue TSC3S (5.7) Ivory TSC3S (5.7) Pink TSC3S (5.7) Green 1.7 MAX 2.0 MAX 3.0 MAX 5.5 MAX 8.0 MAX +50 +50 30.0+50-0% +50 4.0 -0% +50 6.0 -0% 10.0 -0% 20.0 -0% Capacitance Drift (Max) ±2% ±2% ±2% ±3% ±3% Temperature Coefficient (ppm/℃) NPO±100 NPO±100 N600±400 N900±300 N1200±300 500min 500 min 700 min 500 min 300 min Q Value (at 1 Mhz, C max) 4 Insulation Resistance 10 MΩMin Torque 10~72 gf.cm DC Working Voltage 100 VDC 100 VDC 100 VDC 100 VDC 100 VDC DC Withstanding Voltage 220 VDC 220 VDC 110 VDC 110 VDC 110 VDC Operating Temperature -25℃ to 85℃ Parts Numbering Note: Specification are subject to change without notice. For more detail and update, please visit our website. Suntan® Technology Company Limited Website: www.suntan.com.hk Email: [email protected] Tel: (852) 8202 8782 Fax: (852) 8208 6246