SMD POWER INDUCTORS PSB0602 SERIES 1. PART NO. EXPRESSION : PSB0602101MZF (a) (b) (c) (d)(e)(f) (a) Series code (d) Tolerance code : M = ±20% (b) Dimension code (e) X, Y, Z : Standard part (c) Inductance code : 101 = 100uH (f) F : Lead Free 2. CONFIGURATION & DIMENSIONS : C B E F I I D H 101 A G PCB Pattern Unit:m/m A B C D E F G H I 6.0±0.3 6.0±0.3 2.5 Max. 2.0±0.2 1.5±0.2 3.0±0.2 2.8 Ref. 2.2 Ref. 1.9 Ref. 3. SCHEMATIC : 4. MATERIALS : f (a) Core : DR Ferrite Core a (b) Base : LCP c (c) Wire : Enamelled Copper Wire (d) Terminal : Tinned Copper Plate b d e (e) Adhesive : Epoxy (f) Ink : Bon Margue 5. GENERAL SPECIFICATION : a) Temp. rise : 40°C Max. b) Rated current : Base on temp. rise & ǻL/L0A = 10% Max. c) Storage temp. : -40°C to +125°C d) Operating temp. : -40°C to +85°C e) Resistance to solder heat : 260°C.10 secs NOTE : Specifications subject to change without notice. Please check our website for latest information. 05.05.2008 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 1 SMD POWER INDUCTORS PSB0602 SERIES 6. ELECTRICAL CHARACTERISTICS : Inductance ( µH ) Test Frequency ( Hz ) RDC ( mȍ ) Max. IDC (A) PSB06021R0MZF 1.0±20% 1V/100K 25 2.70 PSB06021R5MZF 1.5±20% 1V/100K 35 2.50 PSB06022R2MZF 2.2±20% 1V/100K 40 2.00 PSB06023R3MZF 3.3±20% 1V/100K 50 1.50 PSB06024R7MZF 4.7±20% 1V/100K 70 1.45 PSB06026R8MZF 6.8±20% 1V/100K 95 1.10 PSB0602100MZF 10.0±20% 1V/100K 135 0.90 PSB0602150MZF 15.0±20% 1V/100K 190 0.75 PSB0602220MZF 22.0±20% 1V/100K 250 0.60 PSB0602330MZF 33.0±20% 1V/100K 350 0.50 PSB0602470MZF 47.0±20% 1V/100K 530 0.40 PSB0602680MZF 68.0±20% 1V/100K 700 0.30 PSB0602Z101MZF 100.0±20% 1V/100K 1050 0.25 PSB0602151MZF 150.0±20% 1V/100K 1650 0.20 PSB0602221MZF 220.0±20% 1V/100K 2200 0.18 PSB0602331MZF 330.0±20% 1V/100K 3300 0.15 PSB0602471MZF 470.0±20% 1V/100K 5300 0.12 PSB0602681MZF 680.0±20% 1V/100K 6900 0.11 PSB0602102MZF 1000.0±20% 1V/100K 10000 0.09 Part No. NOTE : Specifications subject to change without notice. Please check our website for latest information. 05.05.2008 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 2 SMD POWER INDUCTORS PSB0602 SERIES 7. CHARACTERISTICS CURVES : @ TEMP. RISE VS. DC SUPERPOSITION RESPONSE CURVE 90 80 102M 101M 330M 100M 1R0M 70 60 ǻt (°C) 50 40 30 20 10 0 0 1 2 3 4 5 6 DC CURRENT (A) @ INDUCTANCE VS. FREQUENCY RESPONSE CURVE @ INDUCTANCE VS. DC SUPERPOSITION RESPONSE CURVE 104 104 5 3 5 3 103 103 102M 5 3 102 L (uH) 101M 5 3 330M 101 100M L (uH) 5 3 102 101M 5 3 330M 101 100M 5 3 0 10 0 10 1R0M 5 3 10-1 10 -3 102M 5 3 1R0M 5 3 3 5 10 -2 3 5 10-1 3 5 10 0 3 5 10 1 3 5 102 10-1 10 -3 3 5 FREQUENCY(MHZ) 10 -2 3 5 10 -1 3 5 10 0 3 5 10 1 3 5 10 2 DC CURRENT (A) NOTE : Specifications subject to change without notice. Please check our website for latest information. 05.05.2008 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 3 SMD POWER INDUCTORS PSB0602 SERIES RECOMMENDED SOLDERING CONDITIONS REFLOW SOLDERINGS 10s max. 255°C Natural cooling 230°C 180°C 150°C Pre-heating 40s max. 90 to 120s 8. PACKAGING INFORMATION : ( 1 ) CONFIGURATION T COVER TAPE N ØC B A 2.0±0.5 ØC D G EMBOSSED CARRIER * CARRIER TAPE WIDTH : D 101 101 101 101 101 101 4 m/m 101 101 P:12 m/m ( 2 ) DIMENSIONS Unit:m/m STYLE A B C D G 13-16 330 21±0.8 13 16 18 T N +0 50 -0 22.4 ( 3 ) Q'TY & G.W. PER PACKAGE INNER : REEL SERIES PSB0602 OUTER : CARTON Q'TY (PCS) G.W. (gw) STYLE Q'TY (PCS) G.W. (Kg) SIZE (cm) 1500 540 13-16 9000 6.8 40 x 40 x 24 NOTE : Specifications subject to change without notice. Please check our website for latest information. 05.05.2008 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 4 SMD POWER INDUCTORS PSB0602 SERIES 9. RELIABILTY AND TEST CONDITION : TEST ITEM SOLDERABILITY SPECIFICATION TEST CONDITION MORE THAN 90% OF THE PREHEAT : 125±25°C FOR 60 SECONDS TERMINAL ELECTRODE SOLDER : 99%Sn/0.3%Ag/0.7%Cu OR EQUIVALENT SHALL BE COVERED SOLDER TEMP. : 245±5°C WITH FRESH SOLDER. FLUX : ROSIN DIP TIME : 4±1 SECONDS THERMAL SHOCK INDUCTANCE SHALL ROOM TEMP. -25±2°C TEST NOT CHANGE MORE 15 MINUTES 30 MINUTES THAN ±20% ( TEMP. CYCLE ) ROOM TEMP. 85±2°C 15 MINUTES 30 MINUTES TOTAL : 50 CYCLES HUMIDITY TEMPERATURE : 40±2°C RESISTANCE TEST HUMIDITY : 90 ~ 95% APPLIED CURRENT : PER SPEC. TIME : 500 HOURS HIGH TEMP. TEMPERATURE : 85±2°C RESISTANCE TEST APPLIED CURRENT : PER SPEC. TIME : 500 HOURS NOTE : Specifications subject to change without notice. Please check our website for latest information. 05.05.2008 SUPERWORLD ELECTRONICS (S) PTE LTD PG. 5