SUPERWORLD ELECTRONICS SW1 HISM Series – 1W High Isolation 3kVdc SMD 24-pin DIP DC-DC Converter SW1 HISM PRODUCT RANGE Model FEATURES • • • • • • 3kVdc Isolated Single & Dual Outputs Low Cost, High Performance Industry standard 24-pin DIP SMD Operating Temp Range –40oC to 85oC 2 Years Warranty Internal Input and Output Filtering DESCRIPTION The SW1 HISM Series provides 3kVdc isolation for the most challenging of applications. The industry standard 24-pin DIP SMD package size of 32.6 x 13.3 x 9.5 mm, is fully isolated with single and dual output models. The SW1 HISM is fully encapsulated in a non-flammable plastic case (meeting UL 94V-0) and is designed to meet EN60950 and UL1950 safety standards. Vin (nom) (Vdc) 1 2 3 10 11 12 13 14 15 22 23 24 Function (SINGLE) +Vout -Vout Not Used -Vin NC +Vin +Vin NC -Vin Not Used -Vout +Vout Function (DUAL) +Vout Common -Vout -Vin NC +Vin +Vin NC -Vin -Vout Common +Vout SW1 HISM Series Product Datasheet Iout (mA) Iin (rated) (mA) Eff. (%) SW105S05HISMF 5 5 200 290 69 SW105S12HISMF 5 12 83 285 70 71 SW105S15HISMF 5 15 66 279 SW105D05HISMF 5 ±5 ± 100 294 68 SW105D12HISMF 5 ± 12 ± 42 296 68 SW105D15HISMF 5 ± 15 ± 42 336 75 SW112S05HISMF 12 5 200 108 77 SW112S12HISMF 12 12 83 108 77 SW112S15HISMF 12 15 66 107 77 SW112D05HISMF 12 ±5 ± 100 117 71 SW112D12HISMF 12 ± 12 ± 42 114 74 SW112D15HISMF 12 ± 15 ± 42 136 77 SW115S05HISMF 15 5 200 97 69 SW115S12HISMF 15 12 83 96 69 SW115S15HISMF 15 15 66 96 69 SW115D05HISMF 15 ±5 ± 100 97 69 SW115D12HISMF 15 ± 12 ± 42 86 78 SW115D15HISMF 15 ± 15 ± 42 106 79 SW124S05HISMF 24 5 200 63 66 SW124S12HISMF 24 12 83 63 66 SW124S15HISMF 24 15 66 60 69 SW124D05HISMF 24 ±5 ± 100 60 69 SW124D12HISMF 24 ± 12 ± 42 63 67 SW124D15HISMF 24 ± 15 ± 42 76 69 Note : All dimensions are in inches (in mm) Tolerances = ± 0.001 inch (± 0.25mm) MECHANICAL SPECIFICATIONS Pin Vout (Vdc) SW105S05HISMF www.superworld.com.sg 1 of 2 SW1 HISM INPUT SPECIFICATIONS PARAMETER CONDITIONS MIN TYPICAL MAX Input Current (No Load) Voltage Range All models 5 Vin models 12 Vin models 15 Vin models 24 Vin models 4.5 10.8 13.5 21.5 20 5 12 15 24 5.5 13.2 16.5 26.5 UNITS mA Vdc SW1 HISM OUTPUT SPECIFICATIONS PARAMETER CONDITIONS Rated Power All models MIN Voltage Setpoint Accuracy Line Regulation Load Regulation (10% load to rated load) 1% change in Vin 5Vout 12 & 15 Vout Ripple & Noise BW = DC to 20MHz Maximum Voltage (1 mA load) 5 Vout models 12 Vout models 15 Vout models TYPICAL MAX UNITS 1.00 W ±3 Temperature Coefficient Capacitive Load Short Circuit Protection 1.0 5 3 1.2 10 10 45 90 7 15 18 % % % % mVp-p Vdc %/ oC ± 0.01 10 1 µF second UNITS SW1 HISM GENERAL CHARACTERISTICS PARAMETER CONDITIONS MIN TYPICAL MAX Temperature Specification 5&12V input Specification 15&24V input Storage -40 -40 -40 ---- 85 70 110 Isolation Test Voltage Resistance Capacitance Leakage Current 3000 10 Isolation Switching Frequency MTTF (Ta = 25 oC) Weight （ （ ） ） MIL-HDBK-217E 10 1 o C C o C o Vdc GΩ pF 2 120 450000 1.8 µArms kHz hrs g Refer to Low Power Application Note 1 for additional Performance Curves & Data CONTACT INFORMATION Superworld Electronics (S) Pte Ltd 16 New Industrial Road #06-01 to 08 Hudson TechnoCentre Singapore 536204 Tel : (65) 6298 2866 Fax : (65) 6298 8900 Email : [email protected] SW1 HISM Series Product Datasheet www.superworld.com.sg 2 of 2