SMBJ5.0A - 188CA SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Stand-off Voltage : 5.0 to 188V SMB (DO-214AA) FEATURES : * * * * * 600W surge capability at 1ms Excellent clamping capability Low inductance Response Time Typically < 1ns Typical IR less then 1µA above 10V 0.22 ± 0.07 2.0 ± 0.1 3.6 ± 0.15 2.3 ± 0.2 Dimensions in millimeter MECHANICAL DATA * * * * * * 1.1 ± 0.3 4.8 ± 0.15 5.4 ± 0.15 Peak Pulse Power : 600 W Case : SMB Molded plastic Epoxy : UL94V-O rate flame retardant Lead : Lead Formed for Surface Mount Polarity : Color band denotes cathode end Mounting position : Any Weight : 0.108 gram MAXIMUM RATINGS Rating at 25 °C ambient temperature unless otherwise specified. Rating Symbol Value Units Peak Pulse Power Dissipation on 10/1000µs waveform (1)(2) (Fig. 3) PPPM Minimum 600 W Peak Pulse Current on 10/1000µs waveform (1) (Fig. 5) IPPM See Table A IFSM 100 A Maximum Instantaneous Forward Voltage at IF = 50A VFM 3.5 V Typical Thermal resistance, Junction to ambient RθJA 100 °C/w TJ, TSTG - 55 to + 150 °C Maximum Peak forward Surge Current 8.3 ms single half sine-wave superimposed on rated load ( JEDEC Method ) (2) Operating Junction and Storage Temperature Range Notes : (1) Non-repetitive Current pulse, per Fig. 5 and derated above Ta = 25 °C per Fig. 1 (2) Mounted on 0.2 x 0.2" (5.0 x 5.0 mm) copper pads to each terminal. Page 1 of 3 Rev. 02 : February 2, 2004 ELECTRICAL CHARACTERISTICS Rating at 25°C ambient temperature unless otherwise specified Type No. Uni-directional Breakdown Voltage @ IT (1) Bi-directional VBR (V) Min. Max. Reverse Stand-off Voltage IT (mA) 6.40 7.07 10 SMBJ5.0A SMBJ5.0CA(4) SMBJ6.0A SMBJ6.0CA 6.67 7.37 10 SMBJ6.5A SMBJ6.5CA 7.22 7.98 10 SMBJ7.0A SMBJ7.0CA 7.78 8.6 10 SMBJ7.5A SMBJ7.5CA 8.33 9.21 1.0 SMBJ8.0A SMBJ8.0CA 8.89 9.83 1.0 SMBJ8.5A SMBJ8.5CA 9.44 10.4 1.0 SMBJ9.0A SMBJ9.0CA 10.0 11.1 1.0 SMBJ10A SMBJ10CA 11.1 12.3 1.0 SMBJ11A SMBJ11CA 12.2 13.5 1.0 SMBJ12A SMBJ12CA 13.3 14.7 1.0 SMBJ13A SMBJ13CA 14.4 15.9 1.0 SMBJ14A SMBJ14CA 15.6 17.2 1.0 SMBJ15A SMBJ15CA 16.7 18.5 1.0 SMBJ16A SMBJ16CA 17.8 19.7 1.0 SMBJ17A SMBJ17CA 18.9 20.9 1.0 SMBJ18A SMBJ18CA 20.0 22.1 1.0 SMBJ20A SMBJ20CA 22.2 24.5 1.0 SMBJ22A SMBJ22CA 24.4 26.9 1.0 SMBJ24A SMBJ24CA 26.7 29.5 1.0 SMBJ26A SMBJ26CA 28.9 31.9 1.0 SMBJ28A SMBJ28CA 31.1 34.4 1.0 SMBJ30A SMBJ30CA 33.1 36.8 1.0 SMBJ33A SMBJ33CA 36.7 40.6 1.0 SMBJ36A SMBJ36CA 40.0 44.2 1.0 SMBJ40A SMBJ40CA 44.4 49.1 1.0 SMBJ43A SMBJ43CA 47.8 52.8 1.0 SMBJ45A SMBJ45CA 50.0 55.3 1.0 SMBJ48A SMBJ48CA 53.3 58.9 1.0 SMBJ51A SMBJ51CA 56.7 62.7 1.0 SMBJ54A SMBJ54CA 60.0 66.3 1.0 SMBJ58A SMBJ58CA 64.4 71.2 1.0 SMBJ60A SMBJ60CA 66.7 73.7 1.0 SMBJ64A SMBJ64CA 71.1 78.6 1.0 SMBJ70A SMBJ70CA 77.8 86 1.0 SMBJ75A SMBJ75CA 83.3 92.1 1.0 SMBJ78A SMBJ78CA 86.7 95.8 1.0 SMBJ85A SMBJ85CA 94.4 104 1.0 SMBJ90A SMBJ90CA 100 111 1.0 SMBJ100A SMBJ100CA 111 123 1.0 SMBJ110A SMBJ110CA 122 135 1.0 SMBJ120A SMBJ120CA 133 147 1.0 SMBJ130A SMBJ130CA 144 159 1.0 SMBJ150A SMBJ150CA 167 185 1.0 SMBJ160A SMBJ160CA 178 197 1.0 SMBJ170A SMBJ170CA 189 209 1.0 SMBJ188A SMBJ188CA 189 231 1.0 Notes: (1) Pulse test : tp<50ms. (2) Surge Current Waveform per Figure 5 and Derate per Figure 1 (3) For bi-directional types have VWM of 10 Volts and less , the ID limit is doubled (4) For the bi-directional SMBJ5.0CA, the maximum VBR is 7.25V (5) "SMBJ" will be omitted in marking on the diode. Page 2 of 3 Maximum Peak Pulse Surge Current Maximum Clamping Voltage @ IPPM VWM (V) Maximum Reverse Leakage @ VWM ID (3) (µA) IPPM (2) (A) VC (V) 5.0 6.0 6.5 7.0 7.5 8.0 8.5 9.0 10 11 12 13 14 15 16 17 18 20 22 24 26 28 30 33 36 40 43 45 48 51 54 58 60 64 70 75 78 85 90 100 110 120 130 150 160 170 188 800 800 500 200 100 50 20 10 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 65.2 58.3 53.6 50.0 46.5 44.1 41.7 39.0 35.3 33.0 30.2 27.9 25.8 24.0 23.1 21.7 20.5 18.5 16.9 15.4 14.2 13.2 12.4 11.3 10.3 9.3 8.6 8.3 7.7 7.3 6.9 6.4 6.2 5.8 5.3 4.9 4.7 4.4 4.1 3.7 3.4 3.1 2.9 2.5 2.3 2.2 2.0 9.2 10.3 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103 113 121 126 137 146 162 177 193 209 243 259 275 328 Rev. 02 : February 2, 2004 RATING AND CHARACTERISTIC CURVES ( SMBJ5.0A - SMBJ188CA ) FIG.2 - MAXIMUM NON-REPETITIVE PERK FORWARD SURGE CURRENT 120 PEAK FORWARD SURGE CURRENT, AMPERES PEAK PULSE DERATING IN % OF PEAK POWER OR CURRENT FIG.1 - PULSE DERATING CURVE 100 80 60 40 20 0 0 25 50 75 100 125 150 100 50 10 175 TJ = TJmax 8.3 ms SINGLE HALF SINE WAVE JEDEC METHOD 200 1 2 Ta, AMBIENT TEMPERATURE, ( °C) FIG.3 - TYPICAL JUNCTION CAPACITANCE 6 10 20 40 60 100 FIG.4 - PEAK PULSE POWER RATING CURVE 6,000 100 PP,PEAK POWER (kW) VR Measured @ Zero Basic (0V) CJ, CAPACITANCE, pF 4 NUMBER OF CYCLES AT 60Hz 1,000 VR Measured @ Stand-off voltage 100 TJ = 25°C f = 1.0 MHz Vsig = 50 mVP-P 10 1.0 0.1 0.1µs 1.0µs 10µs 100µs 1.0ms 10ms 10 1 10 2 100 20 200 td, PULSE WIDTH, SEC. VR, REVERSE STAND OFF VOLTAGE,VOLTS IPPM, PEAK PULSE CURRENT, % FIG.5 - PULSE WAVEFORM tr ≤ 10µs 100 Peak Value IPPM Ta=25 °C Pulse Width (td) is defined as that point where the peak current decays to 50% of IPPM Half Value - IPPM 2 50 10/1000ms. Waveform as defined by R.E.A. td 0 0 1.0 2.0 3.0 4.0 t, TIME(ms) Page 3 of 3 Rev. 02 : February 2, 2004