TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Approval Sheet For Product Specification Issued Date: Feb, 2, 2007 Product Name: SAW Filter 675 MHz SMD 3.0X3.0 mm TST Parts No.: TA0616A Customer Parts No.: Company: Division: Approved by : Date: Checked by: Bob Chau Approval by: Francis Chen Date: 2, 2, 2007 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-01 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 675MHz MODEL NO.:TA0616A REV. NO.:3 A. MAXIMUM RATING: 1. Input Power Level: 10 dBm 2. DC Voltage : 3V 3. Operating Temperature: 0°C to +50°C 4. Storage Temperature: -30°C to +85°C B. ELECTRICAL CHARACTERISTICS: Item Center Frequency RoHS Compliant Lead free Lead-free soldering Unit Fc Insertion Loss at Center Frequency ILc MHz Min. - Type. 675 Max. - Note - dB - 1.6 2.2 - - 1.3 2 - VSWR at Center Frequency Attenuation (Reference level from ILc) 608 ~ 614 MHz dB 20 60 - - 736 ~ 742 MHz dB 20 65 - - 1283 ~ 1289 MHz dB 45 58 - - 1411 ~ 1417 MHz dB 45 55 - - 1958 ~ 1964 MHz dB 35 44 - - 2086 ~ 2092 MHz dB 33 40 - - C. MEASUREMENT CIRCUIT: HP Network analyzer 50Ω B SAW Filter E 50Ω A,C,D,F TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 D.OUTLINE DRAWING: △ 6 □ L B : Input E : Output A,C,D,F : Ground Unit : mm △ : Year Code (2006->6, …, 2009->9) □ : Date Code (Follow the table from planner each year) Note : The base material is ceramic with Au over Ni plating. The plating thicknesses are: Electro Ni : 1.27~8.89μm. Electro Au : 0.3~1.0μm (solder pads only). 0.3μm Min. (Others) E. PCB Footprint: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 F. Frequency Characteristics : TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 Reflection Functions : S11 S22 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 G. PACKING: 1. REEL DIMENSION (Reel Count : 7”=1000 ; 13”=3000 ) 2.TAPE DIMENSION 6 L △ TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 360 340 320 300 280 260 240 220 200 180 160 140 120 100 80 60 40 20 280 260 240 220 200 180 160 140 120 100 80 60 40 20 0 Temp ( Deg C) H. RECOMMENDED REFLOW PROFILE : Time (Sec) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7