TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Approval Sheet For Product Specification Issued Date: Product Name: Low-Loss 70MHz IF SAW Filter (BW=16 MHz) TST Parts No.: TB0214A Customer Parts No.: Company: Division: Approved by : Date: Checked by: Vincent Chiu Approval by: Francis Chen Date: 03 Nov. 2003 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-01 TAI-SAW TECHNOLOGY CO., LTD. No.3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Low-Loss 70 MHz IF SAW Filter (SMD 13.3×6.5 mm) Model No.: TB0214A Rev. No.:1 RoHS Compliant Lead free Lead-free soldering A. Maximum Rating: 1. Input Power Level: +20 dBm 2. Operating Temperature: -10°C to +70°C 3. Storage Temperature: -40°C to +85°C B. Electrical Characteristics: Parameters Unit MHz Min. 69.8 Typical 70 Max. 70.2 dB - 12.2 13.2 1 dB Bandwidth MHz 15.2 15.38 - 3 dB Bandwidth MHz 16.0 16.41 - 40 dB Bandwidth MHz - 20.17 21.0 10 to 59.5 MHz dB 40 43 - 82 to 140 MHz dB 40 45 - Amplitude ripple within Fc ± 7 MHz dB - 0.55 1.0 nsec - 40 80 - - YZ-LN - ppm/ °C - -94 - Center frequency, Fc Insertion Loss, IL Relative Attenuation: Group Delay ripple within Fc ± 7 MHz Substrate Material Temperature Coefficient of frequency TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 C. Frequency Characteristics: (1) Frequency Response (2) Passband response and Group Delay Variation TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 D. Measurement Circuit: Source and load impedance: 50 Ω Network analyzer L1 50Ω K E SAW Filter L2 50Ω A,B,C,D,F,G,H,I,J,L Input: L1=220 nH, Q>40 Output: L2=220 nH, Q>40 E. Outline Drawing: 214 Pin K: RF Input Pin E: RF Output Pin L: Input Ground Pin F: Output Ground Pin A, B, C, D, G, H, I, J: To be Ground □: Date code TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4