TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Tao-Yuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Approval Sheet for Product Specification Issued Date: Product Name: 325 MHz IF SAW Filter (SMD 7.0×5.0 mm) TST Parts No.: TB0398A Customer Parts No.: Company: Division: Approved by : Date: Checked by: Andy Lee Approval by: Francis Chen Date: 2006,11,01 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-01 TAI-SAW TECHNOLOGY CO., LTD. No.3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 325MHz (SMD 7.0×5.0 mm) MODEL NO.: TB0398A Rev. No. 2 A. MAXIMUM RATING: 1.Operating Temperature: -10°C to 60°C 2.Storage Temperature: -40°C to 85°C B. Characteristics : 1.Ambient Temperature : 23°C Item Unit Center frequency, Fc Insertion Loss, IL Lower 3 dB Bandedge MHz Min. - Type. 325 Max. - dB - 9.6 14 - 318.3 320.0 330.0 331.3 - 307.5 312.8 - - 337.4 342.5 MHz Upper 3 dB Bandedge Lower 40 dB Bandedge MHz Upper 40 dB Bandedge Amplitude Ripple (321~329 MHz) dB - 0.4 1 Phase Linearity (320~330 MHz) deg - 5 - nsec - 24 75 Group Delay Ripple (320~330 MHz) Relative Attenuation - 10 - 220 MHz dB 45 50 220 - 300 MHz dB 40 46 350 - 355 MHz dB 40 48 355 - 375 MHz dB 35 48 375 - 380 MHz dB 40 51 380 - 405 MHz dB 35 49 405 - 500 MHz dB 40 48 Source Impedance Ohm - 50 - Load Impedance Ohm - 50 - Temperature Coefficient Substrate Material ppm/oC - -75 - TAI-SAW TECHNOLOGY CO., LTD. 128 LiNbO3 - TST DCC Release document 2 C. Frequency Characteristics : (1) S21 Response:(span 100MHz) Horizontal: 100MHz/Div Vertical: 10dB/Div (2) Pass band Response:(span 20MHz) Horizontal : 0.3MHz/Div Vertical 1: 1dB/Div Vertical 2: 100nS/Div TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 (3) Wide band Response:(span 400 MHz) Horizontal : 40MHz/Div Vertical : 10dB/Div D. Outline Drawing: 398 Pin D : Balanced Input + Pin C : Balanced Input Pin J : Blanced Onput + Pin I : Blanced Onput Pin A, B, E, F, G, H, K, L : To be Ground □ : Week Code (Follow the table from planner each year) Unit : mm △ : Product / Year Code TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 Year 2005 2009 2006 2010 2007 2011 2008 2012 Product Code B b B b E. TEST FIXTURE : F. PCB Footprint: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 G. PACKING: 1. REEL DIMENSION 2. TAPE DIMENSION 398 Direction of feet TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6