TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Tao-Yuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Approval Sheet for Product Specification Issued Date: Product Name: 240MHz IF SAW Filter (BW=20 MHz) TST Parts No.: TB0429A Customer Parts No.: Company: Division: Approved by : Date: Checked by: Andy Yu Approval by: Francis Chen Date: 11/28/2006 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-01 TAI-SAW TECHNOLOGY CO., LTD. No.3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 240MHz (SMD 5.0×7.0 mm) MODEL NO.: TB0429A Rev. NO. 1.0 A. MAXIMUM RATINGS: 1. Operating Temperature: -20°C to 60°C 2. Storage Temperature: -40°C to 85°C 3. Input Power: 15dBm RoHS Compliant Lead free Lead-free soldering B. ELECTRICAL CHARACTERISTICS: 1. Ambient Temperature: 25 °C Characteristics Min. Value Typ. Max. - 240.0 - - - 11.6 13.0 - - 20.6 - - Note Center frequency FC Minimum Insertion loss I.L. (229.75~250.25MHz) 1 dB Bandwidth MHz 3 dB Bandwidth MHz 20 23.1 - - 40 dB Bandwidth MHz - 30.1 32.0 0.6 55 38 1.4 0.54 18 1.0 150 2.0 2.0 - - 35 40 70 60 50 50 42 - dB MHz Amplitude Ripple (231~249MHz) dB Group Delay (229.75~250.25MHz) nsec Triple transient dB Input VSWR Absolute delay usec Phase ripple (P.T.P) deg Relative Rejection (Reference to Minimum Insertion loss) 225 MHz dB 15 255 MHz dB 15 100-120 MHz dB 40 120~160 MHz dB 50 160~218 MHz dB 40 218~220.5 MHz dB 43 260~400 MHz dB 35 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 2 C.FREQUENCY CHRACTERISTICS: (1) wide band of Response: (span: 150MHz) Fig1.S21 Response Horizontal:15MHz/Div Vertical: 10dB/Div (2) Passband of Response: (span: 40MHz) Fig2.S21 Response Horizontal:4MHz/Div Vertical: 1dB/Div TST DCC TAI-SAW TECHNOLOGY CO., LTD. Release document 3 D. TEST CIRCUIT: L1=15nH, C1=45pF, L2=3.3nH, C2=27pF E. OUTLINE DRAWING: Pin 10 : Unbalanced Input Pin 5 : Unbalanced Onput Pin 1, 2, 3, 4, 6, 7, 8, 9 : To be Ground □ : Week Code (Follow the table from planner each year) Unit : mm △ : Product / Year Code Year 2005 2009 2006 2010 2007 2011 2008 2012 Product Code B b B b TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 F.PACKING: 1.REEL DIMENSION 2.TAPE DIMENSION 429 Direction of feed TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 G. Recommended Reflow Profile: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6