TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Approval Sheet For Product Specification Issued Date: Product Name: IF SAW Filter 310 MHz (SMD 5.0mmX5.0mm) TST Parts No.:TB0468A Customer Parts No.: Company: Division: Approved by : Date: Checked by: Andy Lee Approval by: Francis Chen Date: 2007/01/05 ____ TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-01 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com IF SAW Filter 310MHz SMD 5x5mm MODEL NO.: TB0468A REV.No.1 A. MAXIMUM RATING: RoHS Compliant Lead free Lead-free soldering 1.Operating Temperature: -10 °C ~ 60 °C 2. Storage Temperature: -40 °C ~ +85 °C 3. Input Power Level: 10dBm B. Characteristics : 1. Ambient Temperature: 23 °C Characteristics Min. Center frequency FC Insertion loss I.L. 1 dB Bandwidth 3 dB Bandwidth Amplitude Ripple (305~315MHz) Phase linearity (305~315MHz) Group Delay Ripple (Fc±5MHz) MHz dB MHz MHz dB (p-p) deg nsec - Value Typ. Max. - 10 - 310 10.5 11.5 14.3 0.6 14 1 - 3 - - 20 100 Attenuation:( Reference level from minimum insertion loss) 1) 10-205 MHz dB 45 48 2) 205-285 MHz dB 40 43 3) 335-340 MHz dB 38 42 4) 340-360 MHz dB 35 44 5) 360-365 MHz dB 40 44 6) 365-390 MHz dB 35 43 7) 390-485 MHz dB 39 43 Source Impedance Ohm 50 Load Impedance Ohm 50 Temperature C0efficient ppm/° C -75 Substrate Material 128 LiNbO3 TAI-SAW TECHNOLOGY CO., LTD. Note dB - TST DCC Release document - - 2 - C. Frequency Characteristics : 1. S21 Response Fig.1 Horizontal : 10MHz/Div Vertical: 10dB/Div 2. Passband Ripple Fig.2 Horizontal : 2MHz/Div Vertical: 1dB/Div TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 3 - 3. Group Delay Ripple Fig.3 Horizontal : 2MHz/Div Vertical: 100nS/Div 4. Phase linearity Fig.4 Horizontal : 2.5MHz/Div Vertical: 10 deg/Div TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 4 - D. Outline Drawing: Pin B, C : Balanced Input Pin G, F : Balanced Onput Pin A,C,D,E,H : To be Ground : Week Code (Follow the table from planner each year) △ : Product / Year Code Unit : mm Year 2005 2009 2006 2010 2007 2011 2008 2012 Product Code B b B b TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 5 - E. TEST FIXTURE : F. PCB FOOTPRINT TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 6 - G. PACKING: 1. REEL DIMENSION 2. TAPE DIMENSION 468 Direction of Feed TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 7 -