TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Approval Sheet For Product Specification Issued Date: Product Name: IF SAW Filter 374 MHz (SMD 5.0mmX5.0mm) TST Parts No.:TB0501A Customer Parts No.: Company: Division: Approved by : Date: Checked by: Andy Lee Approval by: Francis Chen Date: 2007/7/11 ____ TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-01 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com IF SAW Filter 374MHz SMD 5.0X5.0mm MODEL NO.: TB0501A Rev. No.1 A. MAXIMUM RATING: RoHS Compliant Lead free Lead-free soldering 1.Operating Temperature: -40 °C ~ +85 °C 2. Storage Temperature: -40 °C ~ +85 °C 3. Input Power Level: 10dBm B. Characteristics : 1. Ambient Temperature: 25 °C Characteristics Value Min. Center frequency FC MHz Maximum Insertion loss I.L. dB 1dB Bandwidth MHz 10.5 3dB Bandwidth MHz 35dB Bandwidth MHz Passband Ripple in FC±5.25 MHz dB Group Delay Ripple in FC±5.25 MHz nS Temp Coefficient ppm/° C Attenuation:( Reference level from minimum insertion loss) 1) 279 ~ 346 MHz dB 40 2) 346 ~ 357 MHz dB 40 3) 357 ~ 361 MHz dB 35 4) 387 ~ 391 MHz dB 25 5) 391 ~ 425 MHz dB 30 6) 425 ~ 469 MHz dB 40 TAI-SAW TECHNOLOGY CO., LTD. Max. 374 - 10.0 11.7 13.8 19.9 0.5 35 -25 11.5 1 100 51 50 46 42 47 52 - TST DCC Release document Note. - - - - 2 - C. Frequency Characteristics : 1. S21 Response Fig. 1 Horizontal: 10MHz; Vertical: 10dB/Div 2. Passband Response Fig. 2 Passband Horizontal: 2MHz; Vertical: 1dB/Div TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 3 - 3. Group Delay Fig. 3 Passband Horizontal: 2MHz; Vertical: 1dB/Div 4. Wide band 5. Fig. 4 Passband Horizontal: 20MHz; Vertical: 10dB/Div TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 4 - D. Outline Drawing: 501 Pin configuration #C RF Input #B RF Input ground #G RF Output #F RF Output ground #A,D,E,H To be ground □ : Week Code (Follow the table from planner each year) △ : Product / Year Code Year 2005 2009 2006 2010 2007 2011 2008 2012 Product Code B b B b TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 5 - E. Measurement Circuit: (1) Single end input 50 ohm to Single end output 50 ohm (2) Balanced input 100 ohm to Balanced output 200 ohm TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 6 - F. PCB Footprint G. PACKING: (1). REEL DIMENSION TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 7 - (2). TAPE DIMENSION TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 8 -