TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Tao-Yuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Approval Sheet for Product Specification Issued Date: Product Name: 325MHz IF SAW Filter (BW=9 MHz) TST Parts No.: TB0560A Customer Parts No.: Company: Division: Approved by : Date: Checked by: Andy Yu Approval by: Francis Chen Date: 12/19/2007 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-01 TAI-SAW TECHNOLOGY CO., LTD. No.3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 325MHz (SMD 5.0×7.0 mm) MODEL NO.: TB0560A Rev. NO. 1 A. MAXIMUM RATINGS: 1. Input Power Level: 10 dBm RoHS Compliant Lead free Lead-free soldering 2. Operating Temperature: -40 °C ~ 85°C 3. Storage Temperature: -40°C to 85°C B. ELECTRICAL CHARACTERISTICS: 1. Ambient Temperature: 25 °C Characteristics Min. Center frequency FC Minimum Insertion loss I.L. 1 dB Bandwidth MHz dB MHz 3 dB Bandwidth MHz 40 dB Bandwidth MHz Return Loss dB Amplitude Ripple (320.75~329.25MHz) dB P-P Phase Linearity (320.75~329.25MHz) deg P-P Group Delay Ripple (320.75~329.25MHz) ns P-P Attenuation (Reference level from Minimum insertion loss) (1) 10 ~ 220MHz dB (2) 220 ~ 300MHz dB (3) 350 ~ 355MHz dB (4) 355 ~ 375MHz dB (5) 375 ~ 380MHz dB (6) 380 ~ 405MHz dB (7) 405 ~ 500MHz dB - Value Typ. Max. - Note - 325 12.8 14 9.0 10.6 - 10.0 10 12.4 18.8 12 35.5 - - 0.6 1.0 - - 5.0 - - - 35 75 - 50 40 40 35 40 35 40 64 47 50 51 51 52 53 - - TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document - 2 C. Frequency Characteristics : 1. S21 Response:(span 150MHz) 2. Passband Response: (span 20MHz) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 3. 4. S11 Smith-Chart: (span 150MHz) S22 Smith-Chart: (span 150MHz) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 D. TEST CIRCUIT: L1 Zin J D L3 SAW Filter L2 L4 Zout Zin = Zout =50 ohm L1=10nH, L2=12nH, L3=10nH, L4=15nH E. OUTLINE DRAWING: Pin J: RF input Pin D: RF output Pin K, L, A, B, C, E, F , I, H, G: Ground □ : Week Code (Follow the table from planner each year) Unit : mm △ : Product / Year Code Year 2005 2009 2006 2010 2007 2011 2008 2012 Product Code B b B b TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 F.PACKING: 1.REEL DIMENSION (Reel Count: 7”=1000 typ.; 13”=2000 typ. ) 2.TAPE DIMENSION TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 G. Recommended Reflow Profile: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7