TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Approval Sheet For Product Specification Issued Date: Product Name: SAW IF Filter 36.125MHz for Digital Cable TV TST Parts No.: TB0645A Customer Parts No.: Company: Division: Approved by : Date: Checked by: Kazuma lee Approval by: Francis Chen Date: 2008/12/15 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-01 TAI-SAW TECHNOLOGY CO., LTD. No.3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, Taiwan, R.O.C. TEL : 886-3-4690038 FAX : 886-3-4697532 E-mail : [email protected] Web: www.taisaw.com IF SAW Filter 36.125 MHz MODEL NO.: TB0645A REV. NO.:3 A. FEATURES: 1.IF Filter for Digital TV B. MAXIMUM RATING: 1.DC voltage: 12 V. 2.AC voltage: 10 V. 3.Storage Temperature: -40°C to +85 °C. 4.Operating Temperature: -25 °C to +65 °C C. ELECTRICAL CHARACTERISTICS: MIN. TYP. MAX. 36.05 36.125 36.20 MHz 17.8 20.3 22.8 dB 7.6 9.0 35.0 1.6 -0.5 0.5 2.7 42.0 0.5 8.0 9.4 40.0 3.1 1.0 2.0 4.2 47.0 1.0 8.4 9.8 4.6 2.5 3.5 5.7 - dB MHz MHz dB dB dB dB dB dB 36.0 32.0 42.0 38.0 - dB dB 32.0 36.0 42.0 50.0 38.0 44.0 52.0 56.0 - dB dB dB dB - -40 - ns - 3.9||14.1 2.4||4.4 -72.0 - Center frequency fc Center frequency between 3dB point Insertion attenuation Reference level for the Following data 36.125 MHz Amplitude ripple 32.65-39.60 MHz 3dB Pass Bandwidth 30dB Pass Bandwidth 31.25 MHz 32.13 MHz 32.32 MHz 39.93 MHz 40.13 MHz 47.25 MHz Lower side lobe 25.00 to 29.50 MHz 29.50 to 31.25 MHz Upper side lobe 40.90 to 43.50 MHz 43.50 to 50.00 MHz Reflected Wave Signal Suppression Feed through Signal Suppression Group delay ripple 32.13 … 40.13 MHz Impedance at 36.125 MHz Input Impedance Output Impedance Temperature Coefficient of frequency - TAI-SAW TECHNOLOGY CO., LTD. - KΩ||pF KΩ||pF ppm/K TST DCC Release document 2 D.FREQUENCY CHARACTERISTICS: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 E.TEST CIRCUIT E. Outline Drawing: Pin No. Functions 6 4 5 T ∆ □ 1. 2. 3. 4. 5. Input input - ground Chip carrier - ground Output Output □ : Week Code (Follow the table from planner each year) △ : Product / Year Code Year 2005 2009 2006 2010 2007 2011 2008 2012 Product Code B b B b TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4