• 1N5283-1 THRU 1N5314-1 AVAILABLE IN JAN, JANTX, JANTXV AND JANS PER MIL-PRF-19500/463 • CURRENT REGULATOR DIODES 1N5283 thru 1N5314 and 1N5283-1 thru 1N5314-1 • HIGH SOURCE IMPEDANCE • METALLURGICALLY BONDED • DOUBLE PLUG CONSTRUCTION MAXIMUM RATINGS Operating Temperature: -65°C to +175°C Storage Temperature: -65°C to +175°C DC Power Dissipation: 500mW @ TL= +50°C, L = 3/8” Power Derating: 4 mW / °C above +50°C Peak Operating Voltage: 100 Volts ELECTRICAL CHARACTERISTICS @ 25°C, unless otherwise speci½ed REGULATOR CURRENT l p (mA) @ VS = 25V TYPE NUMBER MINIMUM DYNAMIC IMPEDANCE @VS = 25V ZS (M ) MINIMUM KNEE IMPEDANCE @VK = 6.0 V ZK (M ) MAXIMUM LIMITING VOLTAGE @ lL = 0.8 lp (min) NOM MIN MAX (Note 1) (Note 2) VL (VOLTS) 1N5283 1N5284 1N5285 1N5286 1N5287 0.22 0.24 0.27 0.30 0.33 0.198 0.216 0.243 0.270 0.297 0.242 0.264 0.297 0.330 0.363 25.0 19.0 14.0 9.0 6.6 2.75 2.35 1.95 1.60 1.35 1.00 1.00 1.00 1.00 1.00 1N5288 1N5289 1N5290 1N5291 1N5292 0.39 0.43 0.47 0.56 0.62 0.351 0.387 0.423 0.504 0.558 0.429 0.473 0.517 0.616 0.682 4.10 3.30 2.70 1.90 1.55 1.00 0.870 0.750 0.560 0.470 1.05 1.05 1.05 1.10 1.13 1N5293 1N5294 1N5295 1N5296 1N5297 0.68 0.75 0.82 0.91 1.00 0.612 0.675 0.738 0.819 0.900 0.748 0.825 0.902 1.001 1.100 1.35 1.15 1.00 0.880 0.800 0.400 0.335 0.290 0.240 0.205 1.15 1.20 1.25 1.29 1.35 1N5298 1N5299 1N5300 1N5301 1N5302 1.10 1.20 1.30 1.40 1.50 0.990 1.08 1.17 1.26 1.35 1.210 1.32 1.43 1.54 1.65 0.700 0.640 0.580 0.540 0.510 0.180 0.155 0.135 0.115 0.105 1.40 1.45 1.50 1.55 1.60 1N5303 1N5304 1N5305 1N5306 1N5307 1.60 1.80 2.00 2.20 2.40 1.44 1.62 1.80 1.98 2.16 1.76 1.98 2.20 2.42 2.64 0.475 0.420 0.395 0.370 0.345 0.092 0.074 0.061 0.052 0.044 1.65 1.75 1.85 1.95 2.00 1N5308 1N5309 1N5310 1N5311 1N5312 2.70 3.00 3.30 3.60 3.90 2.43 2.70 2.97 3.24 3.51 2.97 3.30 3.63 3.96 4.29 0.320 0.300 0.280 0.265 0.255 0.035 0.029 0.024 0.020 0.017 2.15 2.25 2.35 2.50 2.60 1N5313 1N5314 4.30 4.70 3.87 4.23 4.73 5.17 0.245 0.235 0.014 0.012 2.75 2.90 FIGURE 1 DESIGN DATA CASE: Hermetically sealed glass case. DO – 7 outline. LEAD MATERIAL: Copper clad steel. LEAD FINISH: Tin / Lead THERMAL RESISTANCE: (ROJEC): 250 °C/W maximum at L = .375 inch THERMAL IMPEDANCE: (ZOJX): 25 °C/W maximum NOTE 1 ZS is derived by superimposing A 90Hz RMS signal equal to 10% of VS on VS POLARITY: Diode to be operated with the banded (Cathode) end negative. NOTE 2 ZK is derived by superimposing A 90Hz RMS signal equal to 10% of VK on VK WEIGHT: 0.2 grams. MOUNTING POSITION: Any. 6 LAKE STREET, LAWRENCE, MASSACHUSETTS 01841 PHONE (978) 620-2600 FAX (978) 689-0803 WEBSITE: http://www.microsemi.com 59 thru 1N5314 INCLUDING -1 VERSIONS TC,TEMPERATURE COEFFICIENT (% / °C) 1N5283 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -0.1 -0.2 -0.3 -0.4 -0.5 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 2.0 3.0 4.0 5.0 3.0 4.0 5.0 lp. NOMINAL PINCH-OFF CURRENT (mA) TC,TEMPERATURE COEFFICIENT FIGURE 2 TEMPERATURE COEFFICIENT 1.0 0.8 0.6 0.4 0.2 TYPICAL RANGE 0 -0.2 -0.4 -0.6 -0.8 -1.0 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 2.0 lp. NOMINAL PINCH-OFF CURRENT (mA) FIGURE 3 TEMPERATURE COEFFICIENT 0.1 ³lp,CURRENT CHANGE (mA) 0 -0.1 -0.2 -0.3 -0.4 -0.5 -0.6 -0.7 -0.8 -0.9 -1.0 -1.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 2.0 lp. NOMINAL PINCH-OFF CURRENT (mA) FIGURE 4 CURRENT REGULATION FACTOR 60 3.0 4.0 5.0