Glass Passvated Junction Transient Voltage Suppressor SA5.0A~180CA 500W Glass Passivated Junction Transient Voltage Suppressor Features • Stand-off voltage from 5.0 to 180 volts • 500W Peak Pulse Power capability on 10/1000 μs waveform repetition Rate(duty cycle): 0.01% • Fast response time: typically less than 1.0ps from 0v to VBR for Uni-directional and 5.0ns for Bi-directional • Excellent clamping capability • Low incremental surge resistance • Typical IR less than 1 mA above 10V DO204AC (DO-15) • High temperature soldering guaranteed 265°C/10 seconds /.037" (9.5mm) lead length, 5lbs (2.3kg),tension • This series is UL recognized under component index. File number E315008 • RoHS Compliant Maximum Ratings (T Ambient=25ºC unless noted otherwise) Symbol Description Value Unit 5.0 to 180 Volts Minimum 500 Watts Non-repetitive current pulse See Table Amps Non-repetitive current pulse Steady State Power Dissipation 3 Watts At TL(Lead Temperature)=75°C (1) Peak Forward Surge Current 70 Amps 8.3ms single half sine-wave superimposed on rated load (JEDEC method) (2) -55 to 175 °C V WM Stand-Off Voltage PPPM Peak Pulse Power Dissipation on 10/1000 us waveform IPPM Peak Pulse current on 10/1000 us waveform PM(AV) IFSM Operating and Storage TJ,TSTG Temperature Range Conditions Note: 1. Mounted on copper pad area of 1.6" x 1.6" (40x40mm) per fig.5. 2. Duty Cycle = 4 pulses per minute maximum. TAITRON COMPONENTS INCORPORATED www.taitroncomponents.com Tel: (800)-TAITRON Fax: (800)-TAITFAX (800)-247-2232 (800)-824-8329 (661)-257-6060 (661)-257-6415 Rev. B/AH 2007-11-10 Page 1 of 6 500W Glass Passvated Junction Transient Voltage Suppressor SA5.0A~180CA Mechanical Data Case: JEDEC DO-204AC molded plastic over glass passivated junction Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Cathode indicated by color band except Bi-directionals Mounting position: Any Weight: 0.015 Ounce, 0. 4 gram Electrical Characteristics (T Ambient=25ºC unless noted otherwise) Stand-Off Voltage P/N Breakdown Voltage @ Test Curr. V BR Uni-Polar Bi-Polar V WM (Volts) Min. Max. SA5.0A SA5.0CA 5.0 6.40 7.00 SA6.0A SA6.0CA 6.0 6.67 7.37 IT(mA) Max. Clamping Vltg. @ IPPM Max. Peak Pulse Current Max. Reverse Leakage Current @ V WM VC (Volts) IPPM (Amps) ID (μA) (note1) 9.2 55.4 600/1200 10.3 49.5 600/1200 10 SA6.5A SA6.5CA 6.5 7.22 7.98 11.2 45.5 400/800 SA7.0A SA7.0CA 7.0 7.78 8.60 12.0 42.5 150/300 SA7.5A SA7.5CA 7.5 8.33 9.21 12.9 39.5 50/100 SA8.0A SA8.0CA 8.0 8.89 9.83 13.6 37.5 25/50 1 SA8.5A SA8.5CA 8.5 9.44 10.40 14.4 35.4 10/20 SA9.0A SA9.0CA 9.0 10.0 11.10 15.4 33.1 5/10 SA10A SA10CA 10.0 11.1 12.30 17.0 30.0 SA11A SA11CA 11.0 12.2 13.50 18.2 28.0 1 1 SA12A SA12CA 12.0 13.3 14.70 19.9 25.6 SA13A SA13CA 13.0 14.4 15.90 21.5 23.7 SA14A SA14CA 14.0 15.6 17.20 23.2 22.0 SA15A SA15CA 15.0 16.7 18.50 24.4 20.9 1 1 SA16A SA16CA 16.0 17.8 19.70 26.0 19.6 SA17A SA17CA 17.0 18.9 20.90 27.6 18.5 Rev. B/AH 2007-11-10 www.taitroncomponents.com Page 2 of 6 500W Glass Passvated Junction Transient Voltage Suppressor SA5.0A~180CA Electrical Characteristics (T Ambient=25ºC unless noted otherwise) Stand-Off Voltage P/N Breakdown Voltage @ Test Curr. V BR IT(mA) Max. Clamping Vltg. @ IPPM Max. Peak Pulse Current Max. Reverse Leakage Current @ V WM VC (Volts) IPPM (Amps) ID (μA) 29.2 17.5 32.4 15.7 Uni-Polar Bi-Polar V WM (Volts) Min. Max. SA18A SA18CA 18.0 20.0 22.10 SA20A SA20CA 20.0 22.2 24.50 SA22A SA22CA 22.0 24.4 26.90 35.5 14.4 SA24A SA24CA 24.0 26.7 29.50 38.9 13.1 SA26A SA26CA 26.0 28.9 31.90 42.1 12.1 SA28A SA28CA 28.0 31.1 34.40 45.4 11.2 SA30A SA30CA 30.0 33.3 36.80 48.4 10.5 SA33A SA33CA 33.0 36.7 40.60 53.3 9.6 SA36A SA36CA 36.0 40.0 44.20 58.1 8.8 SA40A SA40CA 40.0 44.4 49.10 64.5 7.9 1 1 1 SA43CA 43.0 47.8 52.80 69.4 7.3 SA45A SA45CA 45.0 50.0 55.30 72.7 7.0 SA48A SA48CA 48.0 53.3 58.90 77.4 6.6 SA51A SA51CA 51.0 56.7 62.7 82.4 6.2 SA54A SA54CA 54.0 60.0 66.30 87.1 5.9 SA58A SA58CA 58.0 64.4 71.20 93.6 5.4 SA60A SA60CA 60.0 66.7 73.70 96.8 5.3 SA64A SA64CA 64.0 71.1 78.60 103.0 5.0 SA70A SA70CA 70.0 77.8 86.0 113.0 4.5 SA75A SA75CA 75.0 83.3 92.10 121.0 4.2 SA78A SA78CA 78.0 86.7 95.80 126.0 4.0 SA85A SA85CA 85.0 94.4 104.0 137.0 3.7 SA90A SA90CA 90.0 100 111.0 146 3.5 1 1 1 1 SA43A 1 1 1 1 1 Rev. B/AH 2007-11-10 www.taitroncomponents.com Page 3 of 6 500W Glass Passvated Junction Transient Voltage Suppressor SA5.0A~180CA Electrical Characteristics (T Ambient=25ºC unless noted otherwise) Stand-Off Voltage P/N Breakdown Voltage @ Test Curr. V BR Uni-Polar Bi-Polar V WM (Volts) Min. Max. SA100A SA100CA 100.0 111.0 123.0 SA110A SA110CA 110.0 122.0 135.0 IT(mA) Max. Clamping Vltg. @ IPPM Max. Peak Pulse Current Max. Reverse Leakage Current @ V WM VC (Volts) IPPM (Amps) ID (μA) 162.0 3.1 177.0 2.9 1 1 SA120A SA120CA 120.0 133.0 147.0 193.0 2.6 SA130A SA130CA 130.0 144.0 159.0 209.0 2.4 SA150A SA150CA 150.0 167.0 185.0 243.0 2.1 SA160A SA160CA 160.0 178.0 197.0 259.0 1.9 SA170A SA170CA 170.0 189.0 209.0 275.0 1.8 SA180A SA180CA 180.0 200.0 233.0 289.0 1.7 1 1 Note: 1. For Bi-directional type having VWM of 10V or less, the ID limit is double. 2. For parts with suffix A, the V BR is +/- 5%. Typical Characteristics Curves PPPM OR IPPM (%) PPPM Peak Pulse Power Dissipation (KW) Fig.1- Peak Pulse Power Rating Curve Pulse Width td Ambient Temperature Ta (°C) Rev. B/AH 2007-11-10 www.taitroncomponents.com Page 4 of 6 500W Glass Passvated Junction Transient Voltage Suppressor SA5.0A~180CA Fig.4- Max. Non-Repetitive Forward Surge Current Uni-directional only IPPM Peak Pulse current (%) IFSM Peak Forward Surge Current (%) Fig.3- Pulse Waveform Time t (ms) Number of Cycles at 60Hz Fig.6- Capacitance CJ Capacitance (pF) (Watts) PM(AV) Steady State Power Dissipation Fig.5- Steady State Power Derating Curve 10 Lead Temperature TL (°C) Breakdown Voltage (VBR) Rev. B/AH 2007-11-10 www.taitroncomponents.com Page 5 of 6 500W Glass Passvated Junction Transient Voltage Suppressor SA5.0A~180CA How to contact us: US HEADQUARTERS 28040 WEST HARRISON PARKAWAY, VALENCIA, CA 91355-4162 Tel: (800) TAITRON (800) 247-2232 (661) 257-6060 Fax: (800) TAITFAX (800) 824-8329 (661) 257-6415 Email: [email protected] Http://www.taitroncomponents.com TAITRON COMPONENTS MEXICO, S.A .DE C.V. BOULEVARD CENTRAL 5000 INTERIOR 5 PARQUE INDUSTRIAL ATITALAQUIA, HIDALGO C.P. 42970 MEXICO Tel: +52-55-5560-1519 Fax: +52-55-5560-2190 TAITRON COMPONETS INCORPORATED E REPRESENTAÇÕES DO BRASIL LTDA RUA DOMINGOS DE MORAIS, 2777, 2.ANDAR, SALA 24 SAÚDE - SÃO PAULO-SP 04035-001 BRAZIL Tel: +55-11-5574-7949 Fax: +55-11-5572-0052 TAITRON COMPONETS INCORPORATED, SHANGHAI REPRESENTATIVE OFFICE CROSS REGION PLAZA, 899 LINGLING ROAD, SUITE 18C, SHANGHAI, 200030, CHINA Tel: +86-21-54249942 Fax: +86-21-5424-9931 Rev. B/AH 2007-11-10 www.taitroncomponents.com Page 6 of 6