® PRELIMINARY DATASHEET 500 mW DO-35 Hermetically Sealed Glass Small Signal Schottky Diodes AXIAL LEAD DO35 Absolute Maximum Ratings Symbol VRRM IF IFSM TSTG /TJ TA = 25°C unless otherwise noted Value Parameter Units DEVICE MARKING DIAGRAM 1N60 1N60P Peak Reverse Voltage 40 45 V Forward Continuous Current 30 50 mA Peak Forward Surge Current (t =1S) 150 500 mA Storage and Junction Temperature Range L 1N xxx L TC1Nxxxx : Logo : Device Code ℃ -65 to +125 These ratings are limiting values above which the serviceability of the diode may be impaired. Specification Features: DO-35 Package (JEDEC) Through-Hole Device Type Mounting Hermetically Sealed Glass Anode Cathode Compression Bonded Construction All External Surfaces Are Corrosion Resistant And Leads Are Readily Solderable RoHS Compliant ELECTRICAL SYMBOL Solder Hot Dip Tin (Sn) Terminal Finish. Cathode Indicated By Polarity Band Electrical Characteristics Symbol TA = 25°C unless otherwise noted Parameter Test Condition Limits Type Min IF=1mA VF IF=30mA IF=200mA Reverse Leakage Current CJ Junction Capacitance TRR Reverse Recovery Time Max 1N60 0.32 0.5 1N60P 0.24 0.5 1N60 0.65 1.0 Volts Volts Volts Forward Voltage IR Unit Typ VR=15V 1N60P 0.65 1.0 1N60 0.1 0.5 1N60P 0.5 1.0 uA VR=1V, f=1MHz 1N60 2.0 VR=10V, f=1MHz 1N60P 6.0 IF=IR=1mA, Rc=100Ω 1N60 Irr=1mA, pF 1 nS 1N60P Number: DB-046 December 2006 / A Page 1 TC1N60/TC1N60P TAK CHEONG ® TAK CHEONG PRELIMINARY DATASHEET Package Outline Package Case Outline DO-35 DO-35 DIM Millimeters Inches Min Max Min Max A 0.46 0.55 0.018 0.022 B 3.05 5.08 0.120 0.200 C 25.40 38.10 1.000 1.500 D 1.53 2.28 0.060 0.090 Notes: 1. 2. All dimensions are within JEDEC standard. DO35 polarity denoted by cathode band. This datasheet presents technical data of Tak Cheong’s Schottky Diodes. Complete specifications for the individual devices are provided in the form of datasheets. A comprehensive Selector Guide is included to simplify the task of choosing the best set of components required for a specific application. For additional information, please visit our website http://www.takcheong.com. Although information in this datasheet has been carefully checked, no responsibility for the inaccuracies can be assumed by Tak Cheong. Please consult your nearest Tak Cheong’s sales office for further assistance. Tak Cheong reserves the right to make changes without further notice to any products herein to further improve reliability, function or design, cost and productivity. TAK CHEONG ® and are registered trademarks of Tak Cheong Electronics (Holdings) Co., Ltd. Number: DB-046 December 2006 / A Page 2