TEMEX OCXO

SPACE OCXO
Space qualified OCXO – Oven Controlled Crystal Oscillator, Flat pack
General Specification (rev1)
Features...........................................................................................2
Applications .....................................................................................2
Environmental conditions .................................................................2
Mechanical characteristics ...............................................................3
Performance characteristics.............................................................4
OCXO
Space qualified OCXO – Oven Controlled Crystal Oscillator
December, 5th 2007
General Specification (rev1)
Features
•
•
•
•
•
•
•
•
•
•
•
•
Frequency Range : 30 MHz to 100 MHz
Low consumption
Supply Voltage : +9V or +12V
Warm up Consumption : 2Watt
Maximum Steady state Consumption under vacuum : 0.65 Watt
Overall Frequency Stability vs. Operating Temperature Range from +/– 0.2 ppm to +/– 0.5
ppm under vacuum
Ageing per year : +/– 0.3 ppm ; +/– 2 ppm over 15 years typical
Output Wave Form : sine 50 Ohms
Output Level : from 0 to 8 dBm
Compatible with Flatpack TCXO pin-out : 25 x 25 mm
Manufacturing in accordance with MIL-PRF-55310 (Class 1, type 4, level S)
Based on SMD Discrete components technology
Applications
Recommended for frequency reference
Environmental conditions
Parameters
Unit
Minimum
Typical
Maximum
Operating temperature range
°C
– 20
+ 70
Storage temperature range
°C
– 55
+ 125
Shocks (half sine)
900g, 0.3ms
Sine vibration
20g as per MIL-STD-202, Method
204, Condition D
Random vibration
50 Grms as per MIL-STD-202, Method
214, Condition I-F
Radiation
Up to 100 kRad total dose
2/4
All information contained within this document is exclusive property of TEMEX, it is expressly forbidden to partially or totally reproduce or to disclose to a third
party without obtaining prior written permission from TEMEX.
OCXO
Space qualified OCXO – Oven Controlled Crystal Oscillator
December, 5th 2007
General Specification (rev1)
Mechanical characteristics
Figure 1 : Oscillator outline
Pin description
Pin number
Name
Function
1-3
GND
Electrical & Mechanical Ground
2
Vcc
Supply Voltage
4 – 5 – 8 - 9 – 10 - 11
NC
6
Vc
Voltage control for electric tuning
13
Fout
Frequency Output
3/4
All information contained within this document is exclusive property of TEMEX, it is expressly forbidden to partially or totally reproduce or to disclose to a third
party without obtaining prior written permission from TEMEX.
OCXO
Space qualified OCXO – Oven Controlled Crystal Oscillator
December, 5th 2007
General Specification (rev1)
Performance characteristics
Electrical Parameters
Unit
Minimum
Typical
Maximum
Nominal frequency range
MHz
30
40
100
Output level (50 Ω load)
dBm
0
Harmonics level
dBc
– 25
Spurious (offset > 50 Hz)
dBc
– 80
@ 1 Hz offset
dBc/Hz
–55
@ 10 Hz offset
dBc/Hz
–85
@ 100 Hz offset
dBc/Hz
– 115
@ 1 kHz offset
dBc/Hz
– 145
@ 10 kHz offset or greater
dBc/Hz
– 155
ppb
0.02
Initial setting
ppm
0.25
Stability vs. temperature
ppm
Stability vs. 5 % supply voltage variation
ppm
0.01
Stability vs. 10 % load variation
ppm
0.01
Aging over first year
ppm
0.3
Aging over 15 years
ppm
2
Frequency output
8
Phase noise in static conditions @ 100 MHz
Allan variance
@ 1s
Free running mode (Vctrl pin NC)
0.2
0.5
Electrical tuning (Vctrl pin)
Relative pulling frequency range
ppm
± 2.5
Input impedance
Ω
10k
Bandwidth
Hz
1k
Linearity
%
20
Supply voltage (Vcc pin)
Voltage range
VDC
Supply power @ 25 °C under vacuum
W
8.5
9
0.65
12.6
Supply power @ warm up
W
2
Warm up time
mn
10
4/4
All information contained within this document is exclusive property of TEMEX, it is expressly forbidden to partially or totally reproduce or to disclose to a third
party without obtaining prior written permission from TEMEX.