TS4/8GUSDHC6-P3 4/8GB microSDHC Class 6 Card + Reader P3 Description Features • RoHS compliant product. Transcend High Capacity microSD Card series are specifically designed to meet the High Capacity, High • Operating Voltage: 2.7 ~ 3.6V Definition Audio and Video requirement for the latest • Operating Temperature: -25 ~ 85°C Digital Cameras, DV Recorders, Mobile Phones, etc. • Durability: 10,000 insertion/removal cycles The new defined Speed Class enables the host to • Compatible with SD Specification Ver. 2.0 support AV applications to perform real time • Comply with SD File System Specification Ver. 2.0 recording to the microSD memory card. • Mechanical Write Protection Switch with microSD adapter • Supports Speed Class Specification Class 6 • Supports Copy Protection for Recorded Media (CPRM) for Placement SD-Audio 12345678 • Seamless compatibility with SDMI-compliant digital audio devices • Form Factor: 11mm x 15mm x 1mm Front Back Pin Definition SD Mode SPI Mode Pin No. Name Type Description Name Type Description 1 DAT2 I/O/PP Data Line [Bit2] RSV 2 CD/DAT3 I/O/PP Card Detect / Data Line [Bit3] CS I Chip Select 3 CMD PP Command / Response DI I Data In 4 VDD S Supply voltage VDD S Supply voltage 5 CLK I Clock SCLK I Clock 6 VSS S Supply voltage ground VSS S Supply voltage ground 7 DAT0 I/O/PP Data Line [Bit0] DO O/PP Data out 8 DAT1 I/O/PP Data Line [Bit1] RSV Reserved S: Power Supply; I:Input; O:Output; PP:Push-Pull Transcend Information Inc. 1 Reserved TS4/8GUSDHC6-P3 4/8GB microSDHC Class 6 Card + Reader P3 Architecture Transcend Information Inc. 2 TS4/8GUSDHC6-P3 4/8GB microSDHC Class 6 Card + Reader P3 Bus Operating Conditions • General Parameter Symbol Min. Max. Unit -0.3 VDD+0.3 V -10 10 µA -10 10 µA Symbol Min. Max. Unit Supply voltage VDD 2.7 3.6 V Output High Voltage VOH 0.75* VDD Output Low Voltage VOL Input High Voltage VIH Input Low Voltage VIL Peak voltage on all lines Remark All Inputs Input Leakage Current All Outputs Output Leakage Current • Power Supply Voltage Parameter 0.125* VDD 0.625* VDD VDD+0.3 VSS-0.3 Power up time Remark V IOH=-100uA@VDD Min. V IOL=100uA@VDD Min. V 0.25* VDD V 250 ms From 0v to VDD Min. • Current Consumption The current consumption is measured by averaging over 1 second. Before first command: Maximum 15 mA • • During initialization: Maximum 100 mA • Operation in Default Mode: Maximum 100 mA • Operation in High Speed Mode: Maximum 200 mA • Operation with other functions: Maximum 500 mA. • Bus Signal Line Load The total capacitance CL the CLK line of the SD Memory Card bus is the sum of the bus master capacitance CHOST, the bus capacitance CBUS itself and the capacitance CCARD of each card connected to this line: CL = CHOST + CBUS + Ν*CCARD Where N is the number of connected cards. Parameter Pull-up resistance Symbol Min. Max. Unit Remark RCMD 10 100 kΩ To prevent bus floating 40 pF 1 card RDAT Bus signal line capacitance CL CHOST+CBUS shall not exceed 30 pF Transcend Information Inc. 3 TS4/8GUSDHC6-P3 Single card capacitance 4/8GB microSDHC Class 6 Card + Reader P3 CCARD Maximum signal line inductance Pull-up resistance inside card (pin1) RDAT3 10 10 pF 16 nH fPP ≤ 20 MHz 90 kΩ May be used for card detection Note that the total capacitance of CMD and DAT lines will be consist of CHOST, CBUS and one CCARD only because they are connected separately to the SD Memory Card host. Host should consider total bus capacitance for each signal as the sum of CHOST, CBUS, and CCARD, these parameters are defined by per signal. The host can determine CHOST and CBUS so that total bus capacitance is less than the card estimated capacitance load (CL=40 pF). The SD Memory Card guarantees its bus timing when total bus capacitance is less than maximum value of CL (40 pF). Transcend Information Inc. 4 TS4/8GUSDHC6-P3 4/8GB microSDHC Class 6 Card + Reader P3 • Bus Signal Levels As the bus can be supplied with a variable supply voltage, all signal levels are related to the supply voltage. To meet the requirements of the JEDEC specification JESD8-1A and JESD8-7, the card input and output voltages shall be within the following specified ranges for any VDD of the allowed voltage range: Symbol Min. Output HIGH voltage Parameter VOH 0.75* VDD Output LOW voltage VOL Input HIGH voltage VIH Input LOW voltage VIL Transcend Information Inc. Max. Unit Remark V IOH = -100 µA @VDD min 0.125* VDD V IOL = -100 µA @VDD min 0.625* VDD VDD + 0.3 V VSS – 0.3 0.25* VDD V 5 TS4/8GUSDHC6-P3 4/8GB microSDHC Class 6 Card + Reader P3 • Bus Timing Parameter Symbol Min Max. Unit Remark fPP 0 25 MHz CCARD ≤ 10 pF, (1 card) Clock frequency Identification Mode fOD 0(1)/100 400 KHz CCARD ≤ 10 pF, (1 card) Clock low time tWL 10 ns CCARD ≤ 10 pF, (1 card) Clock high time tWH 10 ns CCARD ≤ 10 pF, (1 card) Clock rise time tTLH 10 ns CCARD ≤ 10 pF, (1 card) Clock fall time tTHL 10 ns CCARD ≤ 10 pF, (1 card) Clock CLK (All values are referred to min (VIH) and max (VIL) Clock frequency Data Transfer Mode Inputs CMD, DAT (referenced to CLK) Input set-up time tISU 5 ns CCARD ≤ 10 pF, (1 card) Input hold time tIH 5 ns CCARD ≤ 10 pF, (1 card) Outputs CMD, DAT (referenced to CLK) Transcend Information Inc. 6 TS4/8GUSDHC6-P3 Output Delay time during Data Transfer Mode 4/8GB microSDHC Class 6 Card + Reader P3 tODLY 0 14 ns CL ≤ 40 pF, (1 card) Output Delay time during Identification Mode tODLY 0 50 ns CL ≤ 40 pF, (1 card) (1) 0 Hz means to stop the clock. The given minimum frequency range is for cases were continues clock is required Transcend Information Inc. 7 TS4/8GUSDHC6-P3 4/8GB microSDHC Class 6 Card + Reader P3 • Bus Timing (High Speed Mode) Parameter Symbol Min Max. Unit Remark 50 MHz CCARD ≤ 10 pF, (1 card) Clock CLK (All values are referred to min (VIH) and max (VIL) Clock frequency Data Transfer Mode fPP 0 Clock low time tWL 7 ns CCARD ≤ 10 pF, (1 card) Clock high time tWH 7 ns CCARD ≤ 10 pF, (1 card) Clock rise time tTLH 3 ns CCARD ≤ 10 pF, (1 card) Clock fall time tTHL 3 ns CCARD ≤ 10 pF, (1 card) Inputs CMD, DAT (referenced to CLK) Input set-up time tISU 6 ns CCARD ≤ 10 pF, (1 card) Input hold time tIH 2 ns CCARD ≤ 10 pF, (1 card) Outputs CMD, DAT (referenced to CLK) Transcend Information Inc. 8 TS4/8GUSDHC6-P3 Output Delay time during Data Transfer Mode Output Hold time 4/8GB microSDHC Class 6 Card + Reader P3 tODLY tOH ns CL ≤ 40 pF, (1 card) ns CL ≤ 40 pF, (1 card) 40 pF (1 card) 2.5 1 Total System capacitance for each line CL 1) In order to satisfy severe timing, host shall drive only one card. Transcend Information Inc. 14 9 TS4/8GUSDHC6-P3 4/8GB microSDHC Class 6 Card + Reader P3 Reliability and Durability Temperature Operation: -25°C / 85°C (Target spec) Moisture and corrosion Operation: 25°C / 95% rel. humidity Storage: 40°C / 93% rel. hum./500h Durability 10.000 mating cycles; test procedure: tbd. Bending 10N Torque 0.15N.m or +/-2.5 deg Drop test 1.5m free fall UV light exposure UV: 254nm, 15Ws/cm² according to ISO 7816-1 X-ray exposure 0.1 Gy of medium-energy radiation (70 keV to 140 keV, cumulative dose per year) to Salt Water Spray: 3% NaCl/35C; 24h acc. MIL STD Method 1009 both sides of the card, according to ISO7816-1. Visual inspection No warp page; no mold skin; complete form; no cavities surface smoothness <= -0.1 Shape and form mm/cm² within contour; no cracks; no pollution (fat, oil dust, etc.) Minimum moving force of WP witch 40gf (Ensures that the WP switch will not slide while it is inserted to the connector.) WP Switch cycles Transcend Information Inc. minimum 1000 Cycles(@Slide force 0.4N to 5N) 10 TS4/8GUSDHC6-P3 4/8GB microSDHC Class 6 Card + Reader P3 Register Information Within the card interface six registers are defined: OCR, CID, CSD, RCA, DSR and SCR. These can be accessed only by corresponding commands (see Chapter 4.7). The OCR, CID, CSD and SCR registers carry the card/content specific information, while the RCA and DSR registers are configuration registers storing actual configuration parameters. 1. OCR register The 32-bit operation conditions register stores the VDD voltage profile of the card. Additionally, this register includes status information bits. One status bit is set if the card power up procedure has been finished. This register includes another status bit indicating the card capacity status after set power up status bit. The OCR register shall be implemented by the cards. The 32-bit operation conditions register stores the VDD voltage profile of the card. Bit 7 of OCR is newly defined for Dual Voltage Card and set to 0 in default. If a Dual Voltage Card does not receive CMD8, OCR bit 7 in the response indicates 0, and the Dual Voltage Card which received CMD8, sets this bit to 1. Additionally, this register includes 2 more status information bits. Bit 31 - Card power up status bit, this status bit is set if the card power up procedure has been finished. Bit 30 - Card capacity status bit, this status bit is set to 1 if card is High Capacity SD Memory Card. 0 indicates that the card is Standard Capacity SD Memory Card. The Card Capacity status bit is valid after the card power up procedure is completed and the card power up status bit is set to 1. The Host shall read this status bit to identify a Standard or High Capacity SD Memory Card. The OCR register shall be implemented by the cards. Transcend Information Inc. 11 TS4/8GUSDHC6-P3 4/8GB microSDHC Class 6 Card + Reader P3 OCR Register Definition 1) This bit is valid only when the card power up status bit is set. 2) This bit is set to LOW if the card has not finished the power up routine. The supported voltage range is coded as shown in Table 5-1. A voltage range is not supported if the corresponding bit value is set to LOW. As long as the card is busy, the corresponding bit (31) is set to LOW. 2. CID Register The Card IDentification (CID) register is 128 bits wide. It contains the card identification information used during the card identification phase. Every individual flash card shall have a unique identification number. The structure of the CID register is defined in the following paragraphs: • MID An 8-bit binary number that identifies the card manufacturer. The MID number is controlled, defined, and allocated to a SD Memory Card manufacturer by the SD-3C, LLC. This procedure is established to ensure uniqueness of the CID register. • OID A 2-character ASCII string that identifies the card OEM and/or the card contents (when used as a distribution media either on ROM or FLASH cards). The OID number is controlled, defined, and allocated to a SD Memory Card manufacturer by the SD-3C, LLC. This procedure is established to ensure uniqueness of the CID register. Note: SD-3C, LLC licenses companies that wish to manufacture and/or sell SD Memory Cards, including but not limited to flash memory, ROM, OTP, RAM, and SDIO Combo Cards. SD-3C, LLC is a limited liability company established by Matsushita Electric Industrial Co. Ltd., SanDisk Corporation and Toshiba Corporation. • PNM The product name is a string, 5 ASCII characters long. Transcend Information Inc. 12 TS4/8GUSDHC6-P3 4/8GB microSDHC Class 6 Card + Reader P3 • PRV The product revision is composed of two Binary Coded Decimal (BCD) digits, four bits each, representing an “n.m” revision number. The “n” is the most significant nibble and “m” is the least significant nibble. As an example, the PRV binary value field for product revision “6.2” will be: 0110 0010 • PSN The Serial Number is 32 bits of binary number. • MDT The manufacturing date composed of two hexadecimal digits, one is 8 bit representing the year(y) and the other is four bits representing the month(m). The “m” field [11:8] is the month code. 1 = January. The “y” field [19:12] is the year code. 0 = 2000. As an example, the binary value of the Date field for production date “April 2001” will be: 00000001 0100. • CRC CRC7 checksum (7 bits). 3. CSD Register Table 5-16 shows Definition of the CSD for the High Capacity SD Memory Card (CSD Version 2.0). The following sections describe the CSD fields and the relevant data types for the High Capacity SD Memory Card. CSD Version 2.0 is applied to only the High Capacity SD Memory Card. The field name in parenthesis is set to fixed value and indicates that the host is not necessary to refer these fields. The fixed values enables host, which refers to these fields, to keep compatibility to CSD Version 1.0. The Cell Type field is coded as follows: R = readable, W(1) = writable once, W = multiple writable. Transcend Information Inc. 13 TS4/8GUSDHC6-P3 4/8GB microSDHC Class 6 Card + Reader P3 The CSD Register Fields (CSD Version 2.0) The following sections describe the CSD fields and the relevant data types. If not explicitly defined otherwise, all bit strings are interpreted as binary coded numbers starting with the left bit first. • CSD_STRUCTURE Field structures of the CSD register are different depend on the Physical Specification Version and Card Capacity. The CSD_STRUCTURE field in the CSD register indicates its structure version. The following table shows the version number of the related CSD structure. Transcend Information Inc. 14 TS4/8GUSDHC6-P3 4/8GB microSDHC Class 6 Card + Reader P3 CSD Register Structure • TAAC This field is fixed to 0Eh, which indicates 1 ms. The host should not use TAAC, NSAC, and R2W_FACTOR to calculate timeout and should uses fixed timeout values for read and write operations (See 4.6.2). • NSAC This field is fixed to 00h. NSAC should not be used to calculate time-out values. • TRAN_SPEED The following table defines the maximum data transfer rate per one data line - TRAN_SPEED: Transcend Information Inc. 15 TS4/8GUSDHC6-P3 4/8GB microSDHC Class 6 Card + Reader P3 Note that for current SD Memory Cards that field must be always 0_0110_010b (032h) which is equal to 25MHz - the mandatory maximum operating frequency of SD Memory Card. In High-Speed mode, that field must be always 0_1011_010b (05Ah) which is equal to 50MHz. And when the timing mode returns to the default by CMD6 or CMD0 command, its value will be 032h. • CCC The SD Memory Card command set is divided into subsets (command classes). The card command class register CCC defines which command classes are supported by this card. A value of ‘1’ in a CCC bit means that the corresponding command class is supported. • READ_BL_LEN This field is fixed to 9h, which indicates READ_BL_LEN=512 Byte. • READ_BL_PARTIAL This field is fixed to 0, which indicates partial block read is inhibited and only unit of block access is allowed. • WRITE_BLK_MISALIGN This field is fixed to 0, which indicates write access crossing physical block boundaries is always disabled in High Capacity SD Memory Card. • READ_BLK_MISALIGN This field is fixed to 0, which indicates read access crossing physical block boundaries is always disabled in High Capacity SD Memory Card. • DSR_IMP Defines if the configurable driver stage is integrated on the card. If set, a driver stage register (DSR)must be implemented also. Transcend Information Inc. 16 TS4/8GUSDHC6-P3 4/8GB microSDHC Class 6 Card + Reader P3 • C_SIZE This field is expanded to 22 bits and can indicate up to 2 TBytes (It is the same as the maximum memory space specified by a 32-bit block address.) This parameter is used to calculate the user data area capacity in the SD memory card (not include the protected area). The user data area capacity is calculated from C_SIZE as follows: memory capacity = (C_SIZE+1) * 512K byte As the maximum capacity of the Physical Layer Specification Version 2.00 is 32 GB, the upper 6 bits of this field shall be set to 0. • ERASE_BLK_EN This field is fixed to 1, which means the host can erase one or multiple units of 512 bytes. • SECTOR_SIZE This field is fixed to 7Fh, which indicates 64 KBytes. This value does not relate to erase operation. Version 2.00 cards indicates memory boundary by AU size and this field should not be used. • WP_GRP_SIZE This field is fixed to 00h. The High Capacity SD Memory Card does not support write protected groups. • WP_GRP_ENABLE This field is fixed to 0. The High Capacity SD Memory Card does not support write protected groups. • R2W_FACTOR This field is fixed to 2h, which indicates 4 multiples. Write timeout can be calculated by multiplying the read access time and R2W_FACTOR. However, the host should not use this factor and should use 250 ms for write timeout • WRITE_BL_LEN This field is fixed to 9h, which indicates WRITE_BL_LEN=512 Byte. • WRITE_BL_PARTIAL This field is fixed to 0, which indicates partial block read is inhibited and only unit of block access is allowed. • FILE_FORMAT_GRP Transcend Information Inc. 17 TS4/8GUSDHC6-P3 4/8GB microSDHC Class 6 Card + Reader P3 This field is set to 0. Host should not use this field. • COPY Defines if the contents is original (= ‘0’) or has been copied (=’1’). The COPY bit for OTP and MTPdevices, sold to end consumers, is set to ‘1’ which identifies the card contents as a copy. The COPY bit is an one time programmable bit. • PERM_WRITE_PROTECT Permanently protects the whole card content against overwriting or erasing (all write and erase commands for this card are permanently disabled). The default value is ‘0’, i.e. not permanently write protected. • TMP_WRITE_PROTECT Temporarily protects the whole card content from being overwritten or erased (all write and erase commands for this card are temporarily disabled). This bit can be set and reset. The default value is ‘0’, i.e. not write protected. • FILE_FORMAT This field is set to 0. Host should not use this field. • CRC The CRC field carries the check sum for the CSD contents. The checksum has to be recalculated by the host for any CSD modification. The default corresponds to the initial CSD contents. The following table lists the correspondence between the CSD entries and the command classes. A ‘+’ entry indicates that the CSD field affects the commands of the related command class. Transcend Information Inc. 18 TS4/8GUSDHC6-P3 4/8GB microSDHC Class 6 Card + Reader P3 4. RCA Register The writable 16-bit relative card address register carries the card address that is published by the card during the card identification. This address is used for the addressed host-card communication after the card identification procedure. The default value of the RCA register is 0x0000. The value0x0000 is reserved to set all cards into the Stand-by State with CMD7. 5. DSR Register (Optional) The 16-bit driver stage register is described in detail in Chapter 6.5. It can be optionally used to improve the bus performance for extended operating conditions (depending on parameters like bus length, transfer rate or number of cards). The CSD register carries the information about the DSR register usage. The default value of the DSR register Transcend Information Inc. 19 TS4/8GUSDHC6-P3 4/8GB microSDHC Class 6 Card + Reader P3 is 0x404. 6. SCR Register In addition to the CSD register there is another configuration register that named - SD CARD Configuration Register (SCR). SCR provides information on SD Memory Card's special features that were configured into the given card. The size of SCR register is 64 bit. This register shall be set in the factory by the SD Memory Card manufacturer. The following table describes the SCR register content. • SCR_STRUCTURE Version number of the related SCR structure in the SD Memory Card Physical Layer Specification. SCR Register Structure Version • SD_SPEC Describes the SD Memory Card Physical Layer Specification version supported by this card. SD_SPEC 0 1 2 3-15 Physical Layer Specification Version Number Version 1.0-1.01 Version 1.10 Version 2.00 reserved Physical Layer Specification Version • DATA_STAT_AFTER_ERASE Transcend Information Inc. 20 TS4/8GUSDHC6-P3 4/8GB microSDHC Class 6 Card + Reader P3 Defines the data status after erase, whether it is ‘0’ or ‘1’ (the status is card vendor dependent). • SD_SECURITY Describes the security algorithm supported by the card. SD Supported Security Algorithm Note that it is mandatory for a regular writable SD Memory Card to support Security Protocol. For ROM (Read Only) and OTP (One Time Programmable) types of the SD Memory Card, the security feature is optional. In the case of Standard Capacity SD Memory Card, this field shall be set to 2 (Version 1.01). In the case of High Capacity SD Memory Card, this field shall be set to 3 (Version 2.00). • SD_BUS_WIDTHS Describes all the DAT bus widths that are supported by this card. Since SD Memory Card shall support at least the two bus modes 1bit or 4bit width then any SD Card shall set at least bits 0 and 2 (SD_BUS_WIDTH="0101"). Transcend Information Inc. 21 TS4/8GUSDHC6-P3 4/8GB microSDHC Class 6 Card + Reader P3 Mechanical Dimension Mechanical Description: Top View Transcend Information Inc. 22 TS4/8GUSDHC6-P3 4/8GB microSDHC Class 6 Card + Reader P3 Mechanical Description: Bottom View Transcend Information Inc. 23 TS4/8GUSDHC6-P3 4/8GB microSDHC Class 6 Card + Reader P3 Mechanical Description: Keep Out Area Transcend Information Inc. 24 TS4/8GUSDHC6-P3 4/8GB microSDHC Class 6 Card + Reader P3 microSD package: Dimensions Description Transcend Information Inc. RDP3 is a USB2.0 Compact Card Reader. It is designed 25 TS4/8GUSDHC6-P3 4/8GB microSDHC Class 6 Card + Reader P3 for fast, easy data transfer and exchange using microSD Memory Card. Features • Fully Compliant with the Hi-Speed USB 2.0 specification • USB powered (no external power or battery needed) • Support the microSD Memory Card insertion directly System Requirements • Desktop or notebook computer with a working USB port • One of the following Operating Systems: ® O Windows Me O Windows 2000 O Windows XP O Windows Vista O O O ® Dimensions ® ™ ® Windows 7 ™ Mac OS 9.0, or later ™ Linux Kernel 2.4, or later Placement Transcend Information Inc. 26 Side Millimeters Inches A 32.80 ± 1.0 1.29 ± 0.04 B 16.00 ± 1.0 0.63 ± 0.04 C 7.80 ± 1.0 0.31 ± 0.04 TS4/8GUSDHC6-P3 4/8GB microSDHC Class 6 Card + Reader P3 USB Pinouts Pin No. Pin Name 01 VUSB 02 D- 03 D+ 04 VSS USB Pin Identification Symbol Function D- USB differential signal: D+ The pairs are used to transmit Data/Address/Command VSS Ground VUSB USB Power Input Block Diagram Controller USB Port VUSB 5-3.3/3.3-1.8V Voltage Regulator 12MHz CRYSTAL Transcend Information Inc. 27 VOUT MicroSD slot TS4/8GUSDHC6-P3 4/8GB microSDHC Class 6 Card + Reader P3 Recommended Operating Conditions: SYMBOL PARAMETER MIN. TYP. MAX. UNITS VUSB Power Supply 4.5 5.0 5.5 V TOPR Operating Temperature 0 O 70 C DC Characteristics: SYMBOL PARAMETER MIN. TYP. MAX. UNITS VDD33 Input Voltage 3.0 3.3 3.6 V VDD18 Input Voltage 1.62 1.8 1.98 V VOUT Output Voltage 3.0 3.3 3.6 V TYP. DC Electrical Characteristics of 3.3V I/O: SYMBOL PARAMETER MIN. MAX. UNITS VIL Input Low Voltage 0 0.8 V VIH Input High Voltage 2.0 3.6 V VOL Output Low Voltage 0.4 V VOH Output High Voltage 2.4 V Above technical information is based on industry standard data and tested to be reliable. However, Transcend makes no warranty, either expressed or implied, as to its accuracy and assumes no liability in connection with the use of this product. Transcend reserves the right to make changes in specifications at any time without prior notice. Transcend Information Inc. 28