TN6716A TN6716A CB TO-226 E NPN General Purpose Amplifier This device is designed for general purpose medium power amplifiers and switches requiring collector currents to 1.2A. Sourced from Process 38. See TN6715A for characteristics. Absolute Maximum Ratings* TA = 25°C unless otherwise noted Value Units VCEO Collector-Emitter Voltage 60 V VCBO Collector-Base Voltage 60 V VEBO Emitter-Base Voltage 5 V IC Collector Current - Continuous 2 A TJ, Tstg Operating and Storage Junction Temperature Range -55 to +150 °C Symbol Parameter *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. NOTES: 1) These ratings are based on a maximum junction temperature of 150°C. 2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. Thermal Characteristics TA = 25°C unless otherwise noted Max Characteristic Symbol Units TA=25°C PD Total Device Dissipation Derate above 25°C 1 8 W mW/°C RθJC Thermal Resistance, Junction to Case 50 °C/W RθJA Thermal Resistance, Junction to Ambient 125 °C/W 1997 Fairchild Semiconductor Pr38 TN6716A.SAM revC (continued) Electrical Characteristics Symbol TA = 25°C unless otherwise noted Parameter Test Conditions Min Max Units OFF CHARACTERISTICS BVCEO Collector-Emitter Breakdown Voltage IC = 1 mA 60 V BVCBO Collector-Base Breakdown Voltage IC = 100 µA 60 V BVEBO Emitter-Base Breakdown Voltage IE = 1 mA 5 V ICBO Collector Cutoff Current VCB = 40 V 100 nA IEBO Emitter Cutoff Current VEB = 5 V 10 uA ON CHARACTERISTICS hFE DC Current Gain IC = 50 mA, VCE = 1 V IC = 250 mA, VCE = 1 V IC = 500 mA, VCE = 1 V VCE(sat) Collector-Emitter Saturation Voltage 80 50 20 0.5 0.35 V IC = 250 mA, VCE = 1.0 V 1.2 V 30 pF 25 MHz IC = 250 mA, IB = 10 mA IC = 250 mA, IB = 25 mA VBE(on) Base-Emitter On Voltage 250 SMALL SIGNAL CHARACTERISTICS Ccb Output Capacitance VCB = 10 V, IE = 0, f = 1MHz hfe Small Signal Current Gain IC = 200 mA,VCE = 5 V,f=20MHz 2.5 *Pulse Test: Pulse Width ≤ 300 µs, Duty Cycle ≤ 1.0% 1997 Fairchild Semiconductor Pr38 TN6716A.SAM revC TN6716A NPN General Purpose Amplifier TO-226AE Tape and Reel Data and Package Dimensions TO -226AE Packaging Configuratio n: Figur e 1.0 TAPE and REEL OPTION FSCINT Label sampl e See Fig 2.0 for various Reeling Styles FAIRCHILD SEMICONDUCTOR CORPORATION LOT: CBVK741B019 PN2222N NSID: D/C1: HTB:B QTY: 10000 SPEC: D9842 SPEC REV: FSCINT Labe l B2 QA REV: 5 Reels per Int ermediate Box (FSCINT) Custom ized Labe l F63TNR Label sampl e LOT: CBVK741B019 FSID: PN222N D/C1: D9842 D/C2: F63TNR Labe l QTY: 2000 SPEC: QTY1: QTY2: SPEC REV: CPN: N/F: F Custom ized Labe l (F63TNR)3 375mm x 267mm x 375mm Int ermediate Box AMMO PACK OPTION See Fig 3.0 for 2 Ammo Pack Options TO-226AE TNR/AMMO PACKING INFORMATION Packing Style Quantity Reel A 2,000 D26Z E 2,000 D27Z Ammo EOL code M 2,000 D74Z P 2,000 D75Z FSCINT Labe l 327mm x 158mm x 135mm Immed iate Box Unit weight = 0.300gm Reel weight with components = 0.868 kg Ammo weight with components = 0.880 kg Max quanti ty per intermediate box = 10,000 units Custom ized Labe l 5 Ammo box es per Int ermediate Box Custom ized Labe l F63TNR Barcode Label 333mm x 231mm x 183mm Int ermediate Box BULK OPTION See Bulk Packing Informat ion table FSCINT Barcode Label Anti-static Bubble Sheets (TO-226AE ) BULK PACKING INFORMATION LEADCLIP DIMENSION QUANTITY TO-18 OPTION STD NO LEAD CLIP 1.0 K / BOX J05Z TO-5 OPTION STD NO LEAD CLIP 1.0 K / BOX NO EOL CODE TO-226 STANDARD STRAIGHT NO LEADCLIP 1.5 K / BOX EOL CODE J18Z DESCRIPTION 1,500 un its per EO70 box for std o ption 114mm x 102mm x 51mm EO70 Immediate Box 5 EO70 boxes per Int ermediate Box 530mm x 130mm x 83mm Intermediate box Customized Label FSCINT Labe l 7,500 un its maximum per intermediate box for std opt ion October 1999, Rev. A1 TO-226AE Tape and Reel Data and Package Dimensions, continued TO-226AE Reeling Style Configuration: Figure 2.0 Machine Option “A” (H) Machine Option “E” (J) Style “A”, D26Z, D70Z (s/h) Style “E”, D27Z, D71Z (s/h) TO-226AE Radial Ammo Packaging Configuration: Figure 3.0 FIRST WIRE OFF IS COLLECTOR (ON PKG. 92) ADHESIVE TAPE IS ON THE TOP SIDE FLAT OF TRANSISTOR IS ON TOP ORDER STYLE D74Z (M) FIRST WIRE OFF IS EMITTER ADHESIVE TAPE IS ON BOTTOM SIDE FLAT OF TRANSISTOR IS ON BOTTOM FIRST WIRE OFF IS EMITTER (ON PKG. 92) ADHESIVE TAPE IS ON THE TOP SIDE FLAT OF TRANSISTOR IS ON BOTTOM ORDER STYLE D75Z (P) FIRST WIRE OFF IS COLLECTOR ADHESIVE TAPE IS ON BOTTOM SIDE FLAT OF TRANSISTOR IS ON TOP October 1999, Rev. A1 TO-226AE Tape and Reel Data and Package Dimensions, continued TO-226AE Tape and Reel Taping Dimension Configuration: Figur e 4.0 Hd P Pd b Hb W1 d L H1 HO L1 S WO t W2 W t1 P1 F1 DO P2 PO User Direction of Feed TO-226AE Reel Configuration: Figur e 5.0 ITEM DESCRIPTION SYMBOL DIMENSION Base of Package to Lead Bend b 0.098 (max) Component Height Hb 1.078 (+/- 0.050) Lead Clinch Height HO 0.630 (+/- 0.020) Component B ase Height H1 0.748 (+/- 0.020) Component A lignment ( side/side ) Pd 0.040 (max) Component A lignment ( front/back ) Hd 0.031 (max) Component Pitch P 0.500 (+/- 0.020) Feed Hole Pitch PO 0.500 (+/- 0.008) Hole Center to First Lead P1 0.150 (+0.009, -0.010) Hole Center to Component Center P2 0.247 (+/- 0.007) Lead Spread F1/F2 0.104 (+/- 0 .010) Lead Thickness d 0.018 (+0.002, -0.003) Cut Lead Lengt h L 0.429 (max) Taped Lead Lengt h L1 0.209 (+0.051, -0.052) Taped Lead Thic kness t 0.032 (+/- 0.006) Carrier Tape Thickness t1 0.021 (+/- 0.006) Carrier Tape Widt h W 0.708 (+0.020, -0.019) Hold - down Tape Width WO 0.236 (+/- 0.012) Hold - down Tape position W1 0.035 (max) Feed Hole Position W2 0.360 (+/- 0.025) Sprocket Hole Diameter DO 0.157 (+0.008, -0.007) Lead Spring Out S 0.004 (max) Note : All dimens io ns are in in ches. ELECT ROSTA TIC SEN SITIVE D EVICES D4 D1 D2 F63TNR Label ITEM DESCRIPTION SYMBOL MINIMUM MAXI MUM Reel Diame ter D1 13.975 14.025 Arbor Hole Diameter (Standard) D2 1.160 1.200 (Small Hole) D2 0.650 0.700 Customized Label W1 Core Diameter D3 3.100 3.300 Hub Recess Inner Diameter D4 2.700 3.100 Hub Recess Depth W1 0.370 0.570 Flange to Flange Inner Width W2 1.630 1.690 Hub to Hub Cent er Widt h W3 2.090 W3 W2 Note: All dimensions are inches D3 October 1999, Rev. A1 TO-226AE Tape and Reel Data and Package Dimensions, continued TO-226AE (FS PKG Code 95, 99) 1:1 Scale 1:1 on letter size paper Dimensions shown below are in: inches [millimeters] Part Weight per unit (gram): 0.300 S4.70– 4.32; S1.52– 1.02; 2° TYP S7.73– 7.10; S7.87– 7.37; 2° TYP S1.65– 1.27; 0.51 S0.76– 0.36; S15.61–14.47; S0.51– 0.36; S0.48– 0.30; S1.40– 1.14; PIN S1.40– 1.14; 99 95 1 E E 2 B C 3 C B S4.45– 3.81; 5° TYP 1 2 3 TO-226AE (95,99) S2.41– 2.13; For leadformed option ordering, refer to Tape & Reel data information. October 1999, Rev. A1 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ISOPLANAR™ MICROWIRE™ POP™ PowerTrench QFET™ QS™ Quiet Series™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 ACEx™ CoolFET™ CROSSVOLT™ E2CMOSTM FACT™ FACT Quiet Series™ FAST® FASTr™ GTO™ HiSeC™ SyncFET™ TinyLogic™ UHC™ VCX™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. D