TRUMPOWER TD1

T
TRUMPower
TD1 Series
DC/DC CONVERTERS
5V Input, 5-6 Watts
MODEL NUMBER
OUTPUT
VOLTAGE
OUTPUT
CURRENT
5 VDC
12 VDC
15 VDC
±5 VDC
±12 VDC
±15 VDC
1000
500
400
±500
±250
±200
mA
mA
mA
mA
mA
mA
OUTPUT
POWER
4.5 - 5.5 V INPUT
5W
6W
6W
5W
6W
6W
TD1-5S0505
TD1-6S0512
TD1-6S0515
TD1-5D0505
TD1-6D0512
TD1-6D0515
ELECTRICAL SPECIFICATIONS
All Specifications Typical @+25°C, Nominal Line, and Full
Load Unless Otherwise Noted.
INPUT SPECIFICATIONS
Nominal Line, 4.5-5.5V Input................................5 VDC
Input Filter.............................................................Pi Type
Reverse Voltage Protection..............Internal Shunt Diode
Use External Fuse
OUTPUT SPECIFICATIONS
Voltage Accuracy............................................±2%, Max.
Minimum Load, Single.................................Not Required
Dual................................................20%
Line Regulation...............................................±1%, Max.
Load Regulation, Single NL-FL........................±2%, Max.
Dual, 20%FL-FL..................±5%, Max.
Ripple and Noise, 20MHz BW................100mVp-p, Max.
Short Circuit Protection................................Countinuous
GENERAL SPECIFICATIONS
Efficiency........................................................75% - 81%
Isolation Voltage, Input to Output...........1,500 VDC, Min.
Switching Frequency, 10W/15W................200 KHz, Typ.
Operating Temperature Range................-25°C to +71°C
Derating................... Derate Linearly from 100% at +71°C
to 0% at +100°C
Case Temperature...............................................+100°C
Storage Temperature Range.................-40°C to +100°C
Cooling..............................................Free Air Convection
Weight..................................................2.3 oz. (65 grams)
Case Material...............Metal with Non-Conductive Base
2.00
(50.8)
0.50
(12.7)
0.1
(2.5)
0.30
(7.6)
+OUT COM/NC*
BOTTOM
+IN
0.20
(5.0)
2.00
(50.8)
-OUT
VIEW
0.80
(20.3)
-IN
0.60
(15.2)
0.20
(5.1)
0.90
(22.9)
0.47
(11.9)
* NC (NO CONNECTION) ON SINGLE OUTPUT MODELS
PIN SIZE: 0.04 INCH (1.0 mm) DIA.
ALL DIMENSIONS IN INCHES (mm)
01/2008
Tumbler Technologies + TRUMPower • Santa Clara, CA • 408-988-6616 • [email protected] • www.TRUMPower.com