140 MHz Bandpass SAW Filter 140 MHz Bandpass SAW Filter BP62210 6.0 MHz Bandwidth Complies with Directive 2002/95/EC (RoHS Compliant) Electrical Characteristics Parameter Center Frequency at 25°C Insertion Loss at fc 1 dB Bandwidth 3 dB Bandwidth 40dB Bandwidth 50dB Bandwidth Passband Variation Phase Linearity Group Delay Variation Absolute Delay Ultimate Rejection Substrate Material Ambient Temperature Sym fc Minimum Typical Maximum 139.8 140 140.2 Unit MHz IL BW1 BW3 BW40 BW50 - 5.6 6.0 - 23.9 5.8 6.3 8.1 8.4 0.38 3 27 28.0 8.4 9.0 0.7 4 110 dB MHz MHz MHz MHz dB Deg nsec Ta - 1.94 - 50 - 55 Quartz 25 - µsec dB - Package Type °C DIP2212 Typical Performance Package Outline Matching Configuration L1 = 180 + 330 = 510 nH L2 = 560 nH Nominal Source/Load Impedance : 50 Ω Note: Component values may change depending on board layout. Phone: +86 (10) 5128 1211 © 2006 by Vanlong Technology Co., Ltd. Fax: +86 (10) 5820 3915 Email: [email protected] Web: http://www.vanlong.com BP62210