610.00 MHz SAW Filter • • • • Ideal Front-End Filter for Wireless Receivers Low-Loss, Coupled-Resonator Quartz Design Simple External Impedance Matching Rugged, Hermetic, Low Profile F-11 Package SF610 Absolute Maximum Rating (Ta=25°C) Parameter Rating Unit 0 dBm RF Power Dissipation DC Voltage VDC Between Any Two Pins 10 V Operating Temperature Range -10 ~ +65 °C Storage Temperature Range -40 ~ +85 °C Electronic Characteristics Parameter Sym Minimum Typical Maximum Unit fC NS 610.00 NS MHz fIMG NS 607.15 NS MHz IL - 4.0 6.5 dB BW3 - 10.0 - MHz - - ±0.5 ±1.0 dB fC - 40.0 MHz … fC - 18.0 MHz - 36 48 - dB 600.75 MHz - 35 48 - dB fC + 12.0 MHz … fC + 40.0 MHz - 25 35 - dB |fA| - - 10 ppm/yr DC Insulation Resistance Between any Two Pins - 1.0 - - MΩ Input / Output Impedance - - 50 // 0 Frequency (25°C) Nominal Frequency Image Carrier Frequency Insertion Loss Attenuation 607.25 MHz … 613.75 MHz 3dB Passband Passband Ripple 607.25 MHz … 613.75 MHz Relative Attenuation (relative to IL) Frequency Aging Absolute Value during the First Year Nominal Ω//pF NS = Not Specified Notes: 1. The frequency fC is defined as the midpoint between the 3dB frequencies. 4. The specifications of this device are based on the test circuit shown above and subject to change or obsolescence without notice. 2. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is connected to a 50Ω test system with VSWR ≤ 1.2:1. The test fixture L and C are adjusted for minimum insertion loss at the filter center frequency, fC. Note that insertion loss, bandwidth, and passband shape are dependent on the impedance matching component values and quality. 5. All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale. 6. Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. Unless noted otherwise, specifications apply over the entire specified operating temperature range. 7. For questions on technology, prices and delivery please contact our sales offices or e-mail to [email protected]. 3. Phone: +86 10 6301 4184 Fax: +86 10 6301 9167 © April 2004 by Vanlong Technology Co., Ltd. Email: [email protected] Web: http://www.vanlong.com SF610 610.00 MHz SAW Filter Package Dimensions (F-11) Electrical Connections Terminals 1 2 3 4 Connection Input/Output Case Ground Case Ground Output/Input Package Dimensions Dimensions A B C D E F Marking Nom. (mm) 11.0 4.5 3.2 0.45 5.0 2.54 Tol. (mm) ±0.3 ±0.3 ±0.3 ±0.1 ±0.5 ±0.2 Test Circuit SF610 Ink Marking Color: Black or Blue Nominal Source/Load Impedance : 50 Ω Typical Frequency Response Phone: +86 10 6301 4184 Fax: +86 10 6301 9167 © April 2004 by Vanlong Technology Co., Ltd. Email: [email protected] Web: http://www.vanlong.com SF610