Bulkhead Feed-Thrus 233-104-00 Wall Mount Environmental Bulkhead Feed-Thru MIL-DTL-38999 Series III Type Connector Series 233 - D38999 Series III Type Shell Style 00 - Wall Mount Shell Size 09 11 13 15 17 19 21 23 25 Insert Arrangement Per MIL-DTL-38999 Series III MIL-STD-1560 Alternate Key Position A, B, C, D, E (N = Normal) 233 - 104 - 00 M 11 - 35 P N - 01 Connector Type 104 - Env. Bulkhead Feed-Thru Panel Accomodation 01 - .0625″ (Min) .125″ (Max) 02 - .0625″ (Min) .250″ (Max) 03 - .0625″ (Min) .500″ (Max) Connector Material and Finish M - Aluminum / Electroless Nickel NC - Aluminum / Zinc-Cobalt NF - Cad / O.D. Over Electroless Nickel (1000hr Salt Spray) ZN - Aluminum Zinc-Nickel Olive Drab MT - Aluminum / Ni-PTFE 1000 Hour GreyTM AL - Aluminum / Pure Electrodeposited Aluminum 1. 53 Max MAX 1.53 Style B Flange Mount Contact Termination P - Pin on Flange Side S - Socket on Flange Side D D Sq. SQ . 62 .62 Panel Side Ref Flange Side Ref SQ CCSq. .520 . 520 Max MAX. FUL L YMated MATEDIndicator I NDI CATORRed RED Band BAND Fully 2 PL ACES 2 Places THREAD AAThread . 75 Ref REF .75 . 125 MAX PANEL ACCOMMODATI ON Panel ( THIAccomodation S SI DE ONL Y) DI A BBDiameter 44 Places PL ACES Insert SEE Arrangement MI L - C- 38999 per FOR MIL-DTL-38999 Series III I NSERT A RRANGEMENTS MIL-STD-1560 APPLICATION NOTES 1. TABLE I: CONNECTOR DIMENSIONS SHELL SIZE A THREAD 0.1 P-0.3L-2A B DIA. ± 0.010 (0.3) C DIM. D DIM. DIA MAX. 09 11 13 15 17 19 21 23 25 .625 .750 .875 1.000 1.188 1.250 1.375 1.500 1.625 .128 (3.3) .128 (3.3) .128 (3.3) .128 (3.3) .128 (3.3) .128 (3.3) .128 (3.3) .156 (4.0) .156 (4.0) .719 (18.3) .812 (20.6) .906 (23.0) .969 (24.6) 1.062 (27.0) 1.156 (29.4) 1.250 (31.8) 1.375 (34.9) 1.500 (38.1) .938 (23.8) 1.031 (26.2) 1.125 (28.6) 1.219 (31.0) 1.312 (33.3) 1.438 (36.5) 1.562 (39.7) 1.688 (42.9) 1.812 (46.0) .859 (21.8) .984 (25.0) 1.156 (29.4) 1.281 (32.5) 1.406 (35.7) 1.516 (38.5) 1.641 (41.7) 1.766 (44.9) 1.891 (48.0) © 2010 Glenair, Inc. CAGE CODE 06324 Shell, lock ring, jam nut—Al alloy, see Table II Contacts—Copper alloy/ gold plate Insulators—High grade rigid dielectric/N.A. Seals—Silicone/N.A. 2. For symetrical layouts only. Power to a given contact on one end will result in power to contact directly opposite, 3. Metric Dimensions (mm) are indicated in parentheses letter. Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-11 E-Mail: [email protected] E