Industrial DC-DC Converters 10-15 Watts THE XPERTS IN POWER WD Series • 2:1 Input Range • Isolated Outputs • Efficiency to 82% • 200 kHz Switching Frequency • Input π Filter • Fully Regulated Outputs • Six-sided Shield Specification Input Input Voltage Range Input Filter General • • 5 V (4.7-9.0 VDC) 12 V (9-18 VDC) 24 V (18-36 VDC) 48 V (36-72 VDC) π Network Output Output Power • Voltage Accuracy Line Regulation Load Regulation Ripple & Noise • • • • Temperature Coefficient Short Circuit Protection • 8 Watts for 5 V input version 10 Watts for 12 V input version 15 Watts for 24 & 48 V input versions (optional 10 Watts) ±1% max ±0.2% max ±1% max for a 75% load change 100 mV pK-pK max (20 MHz bandwidth) ±0.02%/°C max • Continuous Switching Frequency Efficiency Isolation • 200 kHz typical • • Dimensions Weight MTBF • • • See Table 500 V DC input to output (1000 MΩ/80 pF) 2.0” x 1.0” x 0.4” 35 g 950,000 hours to MIL-STD-217F Environmental Operating Temperature Storage Temperature • -25 °C to +71 °C • -40 °C to +100 °C • UL1950 for LU versions only Safety Safety Approvals • • www.xpplc.com [email protected] OUTPUT VOLTAGE & CURRENT RATINGS Input Voltage(1) 4.7-9.0 VDC 18-36 VDC 36-72 VDC Input Current No Load Full Load 15 mA 2130 mA 15 mA 2100 mA 15 mA 2100 mA 15 mA 2100 mA 15 mA 2100 mA 15 mA 2100 mA 20 mA 1056 mA 30 mA 1100 mA 30 mA 1065 mA 30 mA 1065 mA 40 mA 1065 mA 40 mA 1065 mA 40 mA 1065 mA 20 mA 543 mA 20 mA 800 mA 20 mA 780 mA 20 mA 780 mA 30 mA 780 mA 30 mA 780 mA 30 mA 780 mA 15 mA 272 mA 10 mA 390 mA 10 mA 380 mA 10 mA 380 mA 15 mA 380 mA 15 mA 380 mA 15 mA 380 mA Efficiency 75% 76% 76% 76% 76% 76% 76% 76% 78% 78% 78% 78% 78% 76% 78% 80% 80% 80% 80% 80% 76% 80% 82% 82% 82% 82% 82% Model Number(2,3) WD501 WD502 WD503 WD504 WD505 WD506 WD100 WD101 WD102 WD103 WD104 WD105 WD106 WD200 WD201 WD202 WD203 WD204 WD205 WD206 WD300 WD301 WD302 WD303 WD304 WD305 WD306 Notes 1. 2. 3. 4. Nominal input voltage 5, 12, 24 or 48 VDC. For optional 10 W version: Add Suffix ‘L’ to WD2xx and WD3xx, except models WD200 and WD300. UL1950 approvals available on 10 W models only. Add suffix ‘LU’ to models WD1xx, WD2xx or WD3xx, not available on WD5xx series. Input current is at nominal input voltage. • Mechanical Details Industrial DC-DC Converters 10-15 Watts WD Series Output Current 1600 mA 666 mA 533 mA ±333 mA ±266 mA ±800 mA 3000 mA 2000 mA 830 mA 666 mA ±415 mA ±333 mA ±1000 mA 3000 mA 3000 mA 1250 mA 1000 mA ±625 mA ±500 mA ±1500 mA 3000 mA 3000 mA 1250 mA 1000 mA ±625 mA ±500 mA ±1500 mA DC-DC Converters 9-18 VDC Output Voltage 5.0 VDC 12.0 VDC 15.0 VDC ±12.0 VDC ±15.0 VDC ±5.0 VDC 3.3 VDC 5.0 VDC 12.0 VDC 15.0 VDC ±12.0 VDC ±15.0 VDC ±5.0 VDC 3.3 VDC 5.0 VDC 12.0 VDC 15.0 VDC ±12.0 VDC ±15.0 VDC ±5.0 VDC 3.3 VDC 5.0 VDC 12.0 VDC 15.0 VDC ±12.0 VDC ±15.0 VDC ±5.0 VDC WD (4) Dimensions in inches (mm) Pin 1 2 3 4 5 www.xpplc.com PIN CONNECTIONS Single Output Dual Output + Input + Input - Input -Input +Output +Output No Pin Common -Output -Output [email protected] Rev 3.0