CLV0625B-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Base stations • Mobile Radios • Test and Measurement £(f) (dBc/Hz) 9939 Via Pasar | San Diego, CA 92126 TEL: (858) 621-2700 | FAX: (858) 621-2722 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 540 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -114 Harmonic Suppression (2nd) -15 Tuning Voltage 0.5 Max Units 710 MHz dBc/Hz -12 dBc 11.5 Vdc MHz/V 20 Tuning Sensitivity (avg.) 4 dBm 400 pF Pushing 1 MHz/V Pulling (14 dB Return Loss, Any Phase) 1 MHz 85 °C Max Units Power Output -2 Load Impedance 1 50 Input Capacitance Operating Temperature Range -40 Package Style Power Supply Requirements MINI-14S-LOW Min Typ Supply Voltage (Vcc, nom.) 3.3 Supply Current (Icc) 27 Vdc 32 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B CLV0625B-LF Voltage-Controlled Oscillator Surface Mount Module Rev A1 Tuning Curve, typ. 765 FREQUENCY (MHz) 740 715 690 665 615 85 °C 25 °C 590 -40 °C 640 565 540 515 490 0 1 2 3 4 5 6 7 8 9 10 11 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 5 4 3 2 1 0.030 MIN. CUTBACK FROM LIVE PADS 0 -1 -2 -3 508 540 565 588 609 631 653 673 692 708 722 732 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-14S 0.220 MINI-14S-LOW 0.160 MINI-14S-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B