V844ME07-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Fixed Wireless • Microwave Radios • £(f) (dBc/Hz) 9939 Via Pasar | San Diego, CA 92126 TEL: (858) 621-2700 | FAX: (858) 621-2722 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 3313 Typ Max Units 3530 MHz Phase Noise @ 10 kHz offset (1 Hz BW) -86 dBc/Hz Harmonic Suppression (2nd) -15 dBc Tuning Voltage 0.5 4.5 MHz/V 81 Tuning Sensitivity (avg.) 6 dBm Input Capacitance 50 pF Pushing 3 MHz/V Pulling (14 dB Return Loss, Any Phase) 7 MHz 85 °C Max Units Power Output 0 Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements 3 Vdc MINI-14S-L Min Typ Supply Voltage (Vcc, nom.) 5 Supply Current (Icc) 17 Vdc 20 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B V844ME07-LF Voltage-Controlled Oscillator Surface Mount Module Rev A1 Tuning Curve, typ. FREQUENCY (MHz) 3580 3560 3540 3520 3500 3480 3460 3440 3420 3400 3380 3360 3340 3320 3300 3280 3260 3240 3220 3200 3180 3160 3140 3120 85 °C 25 °C -40 °C 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 6 5 4 3 0.030 MIN. CUTBACK FROM LIVE PADS 2 1 0 3161 3218 3265 3308 3348 3387 3425 3465 3503 3542 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-14S 0.220 MINI-14S-LOW 0.160 MINI-14S-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B