DISPLAYTRONIC A DIVISION OF ZE XIAMEN CO., LTD. SPECIFICATIONS FOR LIQUID CRYSTAL DISPLAY PART NUMBER: ACM 1602S SERIES DATE: August 9, 1999 ACM1602S SERIES CHARACTER MODULE VER1.0 1.0 MECHANICAL SPECS 1. Overall Module Size 122.0mm(W) x 44.0mm(H) x max 13.5mm(D) for LED backlight version 122.0mm(W) x 44.0mm(H) x max 9.5mm(D) for reflective version 2. Dot Size 1.05mm(W) x 1.20mm(H) 3. Dot Pitch 1.10mm(W) x 1.25mm(H) 4. Duty 1/16 5. Controller IC KS0066 6. LC Fluid Options TN, STN 7. Polarizer Options Reflective, Transflective, Transmissive 8. Backlight Options LED 9. Temperature Range Options Standard (0ºC ~ 50ºC), Wide (-20ºC ~ 70ºC) 2.0 ABSOLUTE MAXIMUM RATINGS Item Symbol Min Typ Max Unit Operating temperature (Standard) Top 0 - 50 ºC Storage temperature (Standard) Tst -10 - 60 ºC Operating temperature (Wide temperature) Top -20 - 70 ºC Storage temperature (Wide temperature) Tst -30 - 80 ºC Input voltage Vin Vss Vdd V Supply voltage for logic Vdd- Vss 2.7 - 5.5 V Supply voltage for LCD drive Vdd- Vo 3.0 4.6 6.5 V 3.0 ELECTRICAL CHARACTERISTICS Item Symbol Condition Min Typ Max Unit Input voltage (high) Vih H level 2.2 - Vdd V Input voltage (low) Vil L level 0 - 0.6 V 0ºC - 4.8 5.4 25ºC 4.2 4.6 - 50ºC 3.9 4.3 - -20ºC - 6.4 7.2 0ºC - 4.8 - 50ºC - 4.3 - 70ºC 3.6 4.1 - Idd Vdd=5.0V, fosc=270kHz - 0.8 1.8 mA LED Power Supply Voltage Vfled R=6.8Ω - 4.2 4.4 V LED Power Supply Current Ifled R=6.8Ω - 120 480 mA Recommended LC Driving Voltage (Standard Temp) Recommended LC Driving Voltage (Wide Temp) Power Supply Current DISPLAYTRONIC Vdd - Vo Vdd -Vo A DIVISION OF ZE XIAMEN V V 1 ACM1602S SERIES CHARACTER MODULE VER1.0 4.0 OPTICAL CHARACTERISTICS (Ta=25ºC, Vdd= 5.0V±0.25V, TN LC fluid) Item Symbol Condition Min Typ Max Unit Viewing angle (horizontal) θ Cr ≥ 4.0 -25 - - deg Viewing angle (vertical) φ Cr ≥ 4.0 -30 - 30 deg Contrast Ratio Cr φ=0°, θ=0° - 2 - Response time (rise) Tr φ=0°, θ=0° - 120 150 ms Response time (fall) Tf φ=0°, θ=0° - 120 150 ms 4.1 OPTICAL CHARACTERISTICS (Ta=25ºC, Vdd= 5.0V±0.25V, STN LC fluid) Item Symbol Condition Min Typ Max Unit Viewing angle (horizontal) θ Cr ≥ 2.0 -60 - 35 deg Viewing angle (vertical) φ Cr ≥ 2.0 -40 - 40 deg Contrast Ratio Cr φ=0°, θ=0° - 6 - Response time (rise) Tr φ=0°, θ=0° - 150 250 ms Response time (fall) Tf φ=0°, θ=0° - 150 250 ms 5.0 BLOCK DIAGRAM U2 1. Vss 2. Vdd 3. Vo SEG1- 40 SEG41- 80 40 4. RS 5. R/W 6. E U1 SEG 1 40 SEG 80 COM 1 ~ LCD 16 X 2 COM 16 16 7. DB0 8 COM16 14. DB7 +/A BL+ -/K BL- DISPLAYTRONIC LED BACKLIGHT A DIVISION OF ZE XIAMEN 2 VER1.0 ACM1602S SERIES CHARACTER MODULE 6.0 PIN ASSIGNMENT 7.0 POWER SUPPLY Pin No. Symbol Function 1 Vss Ground 2 Vdd +5V 3 Vo LCD contrast adjust 4 RS Register select 5 R/W Read / write 6 E Enable 7 DB0 Data bit 0 8 DB1 Data bit 1 9 DB2 Data bit 2 10 DB3 Data bit 3 11 DB4 Data bit 4 12 DB5 Data bit 5 13 DB6 Data bit 6 14 DB7 Data bit 7 +/A BL+ Power Supply for BL+ -/K BL- Power Supply for BL- Vdd Vo Vr +5V Vss STANDARD TEMP RANGE Vdd Vo Vr +5V -5V Vss WIDE TEMP RANGE Vr = 10KΩ ~ 20KΩ 8.0 TIMING CHARACTERISTICS Item Symbol Test Condition Min. Typ. Max. Unit Enable cycle time tC Fig. a, Fig. b 500 - - ns Enable pulse width tW Fig. a, Fig. b 220 - - ns Enable rise/fall time tR , tF Fig. a, Fig. b - - 25 ns RS, R/W set up time tSU Fig. a, Fig. b 40 - - ns RS, R/W hold time tH Fig. a, Fig. b 10 - - ns Data delay time tD Fig. b - - 120 ns Data set up time tDSU Fig. a 60 - - ns Data hold time tDH Fig. a, Fig. b 20 - - ns DISPLAYTRONIC A DIVISION OF ZE XIAMEN 3 ACM1602S SERIES CHARACTER MODULE RS R/W VIH1 VIH1 VIL1 t SU VIL1 tH V IL1 VER1.0 VIL1 tW tF VIH1 E tH VIH1 VIL1 tR VIL1 VIL1 t DSU t DH VIH1 DB0~DB7 VIH1 Valid Data VIL1 VIL1 tC Fig. a Interface timing (data write) RS VIH1 VIH1 VIL1 t SU VIL1 tH V IH1 VIH1 R/W tW E VIH1 VIL1 tH VIH1 VIL1 tR t DSU tD DB0~DB7 tF VIH1 VIL1 t DH Valid Data VIL1 VIH1 VIL1 tC Fig. b Interface timing (data read) DISPLAYTRONIC A DIVISION OF ZE XIAMEN 4 ACM1602S SERIES CHARACTER MODULE VER1.0 9.0 MECHANICAL DIAGRAM DISPLAYTRONIC A DIVISION OF ZE XIAMEN 5 ACM1602S SERIES CHARACTER MODULE VER1.0 10.0 RELIABILITY TEST Evaluations and Assessment* Storage Condition Content Operation at high temperature and humidity High temperature storage Low temperature storage Oozing Contrast Other Appearances 40ºC,90% RH,240hrs Current Consumption Twice initial value or less none More than 80% of initial value No abnormality 60ºC, 240hrs -20ºC, 240hrs Twice initial value or less Twice initial value or less none More than 80% of initial value More than 80% of initial value No abnormality No abnormality *Evaluations and assessment to be made two hours after returning to room temperature (25ºC±5ºC). *The LCDs subjected to the test must not have dew condensation. DISPLAYTRONIC A DIVISION OF ZE XIAMEN 6 ACM1602S SERIES CHARACTER MODULE VER1.0 11.0 DISPLAY INSTRUCTION TABLE DESCRIPTION Executing time fosc=250khz 1 Clears Display & Returns to Address 0. 1.64ms 1 x Returns Cursor to Address 0. Also returns the display being shifted to the original position. DDRAM contents remain unchanged. 1.64ms I/D S I/D: Set Cursor Moving Direction I/D=1: Increment I/D=0: Decrement COMMAND R R/ DB DB DB DB S W 7 6 5 4 DB 3 DB 2 Clear Display 0 0 0 0 0 0 0 0 0 Cursor at Home 0 0 0 0 0 0 0 0 Entry Mode Set 0 0 0 0 0 0 0 1 DB DB 1 0 40µs S: Specify Shift of Display S=1: The display is shifted S=0: The display is not shifted 0 0 0 0 Cursor / Display Shift 0 0 0 0 0 1 S/C R/L x x Moves cursor or shifts the display w/o changing DD RAM contents S/C=0: Cursor Shift (RAM unchanged) S/C=1: Display Shift (RAM unchanged) R/L=1: Shift to the Right R/L=0: Shift to the Left Function Set 0 0 0 0 1 DL N F x x Sets data bus length (DL), # of display lines (N), and character fonts (F). DL=1: 8 bits F=0: 5x7 dots DL=0: 4 bits F=1: 5x10 dots N=0: 1 line display N=1: 2 lines display Set CG RAM Address 0 0 0 1 Set DD RAM Address 0 0 1 Busy Flag / 0 Address Read 1 B F Write Data 1 0 Read Data 1 1 0 0 1 D C B Display D=1: Display on D=0: Display off Cursor C=1: Cursor on C=0: Cursor off Brink B=1: Brink on B=0: Brink off Display ON/OFF Control Character Generator (CG) RAM Address 40µs 40µs 40µs Sets CG RAM address. CG RAM data is sent and received after this instruction. 40µs Display Data (DD) RAM Address / Cursor Address Sets DD RAM address. DD Ram data is sent and received after this instruction. 40µs Address counter used for both DD & CG RAM address Reads Busy Flag (BF) and address counter contents. 40µs Write Data Writes data into DDRAM or CGRAM. 46µs Read Data Reads data from DDRAM or CGRAM. 46µs x: Don't Care. DISPLAYTRONIC A DIVISION OF ZE XIAMEN 7 ACM1602S SERIES CHARACTER MODULE VER1.0 12.0 STANDARD CHARACTER PATTERNS Note: The character generator RAM is the RAM with which the user can rewrite character patterns by program. DISPLAYTRONIC A DIVISION OF ZE XIAMEN 8