ZOWIE Schottky Barrier Diode Objective Specification SCD13PH OUTLINE DIMENSIONS FEATURES Case : 2010 Halogen-free type Lead free product, compliance to RoHS Lead less chip form, no lead damage Lead-free solder joint, no wire bond & lead frame Low power loss, High efficiency High current capability Low forward voltage drop Plastic package has Underwriters Laboratory Flammability Classification 94V-0 0.05 4.5 ± 0.1 0 0.5 0.95 ± 0.2 0.95 ± 0.2 + 0.2 - 0.1 APPLICATION Switching mode power supply applications Portable equipment battery applications High frequency rectification DC / DC Converter Telecommunication 0.96 * * * * * Unit : mm 2.20 ± 0.1 * * * * * * * * (30V / 1.0A) JEDEC : SMA DO-214AC MARKING MECHANICAL DATA Case : Packed with FRP substrate and epoxy underfilled Terminals : Pure Tin plated (Lead-Free), solderable per MIL-STD-750, Method 2026. Polarity : Laser Cathode band marking Weight : 0.02 gram Series code Cathode mark SCD 13P . Amps class Voltage class Halogen-free type Low VF & Low IR PACKING * 3,000 pieces per 7" (178mm ± 2mm) reel * 4 reels per box * 6 boxes per carton o Absolute Maximum Ratings (Ta = 25 C) ITEM Symbol Conditions Rating Unit Repetitive peak reverse voltage VRRM 30 V Average forward current IF(AV) 1.0 A Peak forward surge current IFSM 30 A Operating junction temperature Range 8.3ms single half sine-wave 150 o C -55 to +150 o C Tj TSTG Storage temperature Range o Electrical characteristics (Ta = 25 C) ITEM Forward voltage (NOTE 1) Repetitive peak reverse current Junction capacitance Symbol VF IRRM Cj Rth(JA) Thermal resistance Rth(JL) Conditions Min. Typ. Max. Unit IF = 1.0A - 0.37 0.39 V VR = Max. VRRM , Ta = 25 oC - 0.10 0.20 mA VR = 4V, f = 1.0 MHz - 115 - pF Junction to ambient (NOTE 2) - 55 - o C/W - o C/W Junction to lead (NOTE 2) - 17 NOTES : (1) Pulse test width PW=300usec , 1% duty cycle. (2) Mounted on P.C. board with 0.2 x 0.2"(5.0 x5.0mm) copper pad areas. (3) The objective specification for product development. REV. 1 2009/10 ZOWIE SCD13PH (30V / 1.0A) FIG.1 - FORWARD CURRENT DERATING CURVE FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 40 RESISTIVE OR INDUCTIVE LOAD P.C.B. MOUNTED ON 0.2X0.2"(5.0X5.0mm) COPPER PAD AREAS PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 1.0 0.5 0 8.3ms Single Half Sine-Wave 30 20 10 0 0 25 50 75 100 125 150 1 175 10 o FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4 - TYPICAL REVERSE CHARACTERISTICS 100 INSTANTANEOUS REVERSE CURRENT, MILLIAMPERES 10 IINSTANTANEOUS FORWARD CURRENT, (A) 100 NUMBER OF CYCLES AT 60Hz LEAD TEMPERATURE, C 1.00 o Ta=25 C 0.10 0.01 10 o TJ=100 C 1.0 0.10 o TJ=25 C 0.01 .001 0.001 0 0.1 0.2 0.3 0.4 0 0.5 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE,% INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG.5 - TYPICAL JUNCTION CAPACITANCE 400 JUNCTION CAPACITANCE, pF o TJ = 25 C f=1.0MHz Vsig=50mVP-P 100 10 .1 1.0 10 100 REVERSE VOLTAGE, VOLTS REV. 1 2009/10