.100″ and .100″ .100″ Pin Strip Header Straight & Right Angle, Solder Tail 2400 Series One and two row versions Straight and right angle versions Break to length for faster delivery, lower inventory costs, and faster prototyping Tapered tip does not cut the socket wipe during insertion, reducing operational failures and repairs Solder standoffs facilitate wash of flux residue, reducing costly rework Board pin retention feature available Date Modified: December 28, 1999 TS-0767-03 Sheet 1 of 3 14 Physical Insulation Material: Flammability: Color: Contact Material: Plating Underplate: Wiping Area: Solder Tails: Glass Filled Polyester (PBT) UL 94V-0 Gray Copper Alloy 100 µ″ [ 2.54 µm ] Nickel — QQ-N-290, Class 2 30 µ″ [ 0.76 µm ] Gold — MIL-G-45204, Type II, Grade C 200 µ″ [ 5.08 µm ] 90/10 Tin Lead — MIL-P-81728 Electrical Current Rating: 3 A Insulation Resistance: > 1 × 109 Ω at 500 Vdc Withstanding Voltage: 1000 Vrms at Sea Level Environmental Temperature Rating: –55°C to +105°C UL File No.: E68080 3M Interconnect Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 For technical, sales or ordering information call 800-225-5373 .100″ and .100″ .100″ Pin Strip Header Straight & Right Angle, Solder Tail 2400 Series Straight Pin Quantity C +.020 –.005 (See note 1) One Row Two Row 01 .096 [2.44] .04 [1.0] .100 [2.54] .100 [2.54] .048 [1.22] A .008 .048 [1.22] A .008 .100 [2.54] B .010 B .008 .015 ± .002 [ 0.38 ] .04 [1.0] .196 [4.98] R .0075 Ref [ 0.190 ] C +.020 – .005 (See Note 1) .028 ± .001 [ 0.71 ] .0245 ± .0005 [ 0.622 ] .035 .003 [0.89] (See Note 2) Pin Cross Section .100 .003 [2.54] .100 .003 [2.54] ∅ .035 ± .003 [0.89 ] (See Note 2) Inch [mm] Tolerance Unless Noted .0 .100 ± .003 Typ [ 2.54 ] ± .1 Inch [ Recommended Mounting Hole Pattern ± .01 ± .005 ] Dimensions for Reference Only Notes; 1. This part is molded in the 40 contact quantity version. Parts that require fewer contacts are broken to length. Dimension “C” is measured from a “Molded End” to the “Center of the Break Point” beyond the desired quantity. On Pin Strips, which have break points on both ends, “C” = .100″ x contact quantity per row. 2. The recommended PCB hole size for the kinked tail positions on the .112″ solder tail connector is .035″ ± .002. Refer to TS-0971 for the number of tails kinked and the position kinked. Ordering Information Pin Quantity: (See Table) One Row (01–40) Two Row (04–80) .000 .00 Dimension C 0.09 [ 2.3] 02 04 0.19 [ 4.8] 03 06 0.29 [ 7.4] 04 08 0.39 [ 9.9] 05 10 0.49 [12.4] 06 12 0.59 [15.0] 07 14 0.69 [17.5] 08 16 0.79 [20.1] 09 18 0.89 [22.6] 10 20 0.99 [25.1] 11 22 1.09 [27.7] 12 24 1.19 [30.2] 13 26 1.29 [32.8] 14 28 1.39 [35.3] 15 30 1.49 [37.8] 16 32 1.59 [40.4] 17 34 1.69 [42.9] 18 36 1.79 [45.5] 19 38 1.89 [48.0] 20 40 1.99 [50.5] 21 42 2.09 [53.1] 22 44 2.19 [55.6] 23 46 2.29 [58.2] 24 48 2.39 [60.7] 25 50 2.49 [63.2] 26 52 2.59 [65.8] 27 54 2.69 [68.3] 28 56 2.79 [70.9] 29 58 2.89 [73.4] 30 60 2.99 [75.9] 31 62 3.09 [78.5] 32 64 3.19 [81.0] 33 66 3.29 [83.6] 34 68 3.39 [86.1] 35 70 3.49 [88.6] 36 72 3.59 [91.2] 37 74 3.69 [93.7] 38 76 3.79 [96.3] 39 78 3.89 [98.8] 40 80 3.98 [101.1] 24XX-6XXXTB Pin Length (Dim A) 1 = .235″ 2 = .318″ Tail (Dim B) One Row 12=.112″ Solder Tails 13=.155″ Solder Tails 32=.112″ Kinked Solder Tails Two Row 22=.112″ Solder Tails 23=.155″ Solder Tails 72=.112″ Kinked Solder Tails TS-0767-03 Sheet 2 of 3 3M Interconnect Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 For technical, sales or ordering information call 800-225-5373 .100″ and .100″ .100″ Pin Strip Header Straight & Right Angle, Solder Tail Right Angle .04 [1.0] 2400 Series Pin Quantity C +.020 –.005 (See Note 1) .119 [3.02] .045 ± .002 B .010 [ 1.14 ] .100 [2.54] .071 [1.80] R .0075 Ref [0.190] .0245 ± .0005 [ 0.622 ] A .008 .028 ± .001 [ 0.71 ] Pin Cross Section .100 [2.54] .07 [1.8] ∅ .035 ± .003 [ 0.89 ] ( See Note 2 ) C +.020 – .005 (See Note 1) .045 ± .002 [ 1.14 ] .100 .003 [2.54] .219 [5.56] .100 .003 [2.54] ∅ .035 ± .003 [0.89 ] (See Note 2) B .010 .100 [2.54] .04 [1.0] .100 ± .003 Typ [ 2.54 ] .100 [2.54] .100 [2.54] .071 [1.80] A .008 Recommended Mounting Hole Pattern .07 [1.8] .100 [2.54] Ordering Information Pin Quantity: (See Table) One Row (01-40) Two Row (02–80) Two Row Dimension C 01 02 0.09 [ 2.3] 02 04 0.19 [ 4.8] 03 06 0.29 [ 7.4] 04 08 0.39 [ 9.9] 05 10 0.49 [12.4] 06 12 0.59 [15.0] 07 14 0.69 [17.5] 08 16 0.79 [20.1] 09 18 0.89 [22.6] 10 20 0.99 [25.1] 11 22 1.09 [27.7] 12 24 1.19 [30.2] 13 26 1.29 [32.8] 14 28 1.39 [35.3] 15 30 1.49 [37.8] 16 32 1.59 [40.4] 17 34 1.69 [42.9] 18 36 1.79 [45.5] 19 38 1.89 [48.0] 20 40 1.99 [50.5] 21 42 2.09 [53.1] 22 44 2.19 [55.6] 23 46 2.29 [58.2] 24 48 2.39 [60.7] 25 50 2.49 [63.2] 26 52 2.59 [65.8] 27 54 2.69 [68.3] 28 56 2.79 [70.9] 29 58 2.89 [73.4] 30 60 2.99 [75.9] 31 62 3.09 [78.5] 32 64 3.19 [81.0] 33 66 3.29 [83.6] 34 68 3.39 [86.1] [mm] 35 70 3.49 [88.6] Tolerance Unless Noted 36 72 3.59 [91.2] 37 74 3.69 [93.7] 38 76 3.79 [96.3] 39 78 3.89 [98.8] 40 80 3.98 [101.1] Inch Notes: 1. This part is molded in the 40 contact quantity version. Parts that require fewer contacts are broken to length. Dimension “C’’ is measured from a ‘‘Molded End’’ to the ‘‘Center of the Break Point’’ beyond the desired quantity. On Pin Strips, which have break points on both ends, ‘‘C’’ = .100″ x contact quantity per row. 2. The recommended PCB hole size for the kinked tail positions on the .112″ solder tail connector is .035″ ± .002. Refer to ts–0971 for the number of tails kinked and the position kinked. One Row .0 Inch ± .1 .00 .000 ± .01 ± .005 [ ] Dimensions for Reference only 24XX-5XXXTB Pin Length (Dim A) 1 = .235″ 2 = .318″ Tail (Dim B) One Row 12=.112″ Solder Tails 13=.155″ Solder Tails 32=.112″ Kinked Solder Tails Two Row 22=.112″ Solder Tails 23=.155″ Solder Tails 72=.112″ Kinked Solder Tails TS-0767-03 Sheet 3 of 3 3M Interconnect Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 For technical, sales or ordering information call 800-225-5373