D Sub Connectors 50 Position EMI Junction Shell 3357-9250 Series Cast aluminum shell provides EMI/ESD protection Spring latch allows positive, quick and easy connect and disconnect Strain relief compensates for various round cable outside diameters Nickel plating provides attractive and corrosion-resistant features Date Modified: February 19, 1999 TS-0245-05 Sheet 1 of 2 58 Physical Junction Shell Kit Hardware Included: (2) Shell Halves - Die Cast Aluminum Alloy, Clear Chromate (2) 8 × 32 × 3/8 - Steel, Zinc (2) Latch - Stainless Steel (1) Tape Strip Latch Bracket Kit Hardware Included: (1) Bracket - Stainless Steel (2) Screws #4-40 × 7/16 - Steel, Zinc (6) Flat Washers - Steel, Zinc (2) Spring Washers - Steel, Zinc 3M Interconnect Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 For technical, sales or ordering information call 800-225-5373 D Sub Connectors 50 Position EMI Junction Shell 3357-9250 Series 0.75 [ 19.0 ] 0.58 [ 14.7 ] 2.0 [ 5.1 ] 3.37 [ 85.6 ] Junction Shell 2.20 [ 55.9 ] 0.75 [ 19.0 ] 0.520 [ 13.21 ] 0.42 [ 10.7 ] 2.406 [ 61.11 ] 0.035 [ 0.89 ] 3.28 [ 83.3 ] Inch [mm] Latch Bracket Tolerance Unless Noted .0 Inch ± .1 .00 .000 ± .01 ± .005 [ ] Dimensions for Reference only Note: Maximum Panel Thickness for Latch Bracket is 3/32”. Ordering Information Junction Shell 3357-9250 Latch Bracket (Order Separately) 3505-62 TS-0245-05 Sheet 2 of 2 3M Interconnect Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 For technical, sales or ordering information call 800-225-5373