THICK FILM CHIP RESISTORS NETWORK • RTN02-10T ■CONSTRUCTION Overcoating 473 473 Alumina Substrate Plating(Ni+Sn) ■DIMENSIONS L1 <Circuits> R T L2 S 473 E W L2 L1 H P Q L Unit: mm Dimensions Type L 3.20 ± 0.20 RTN02-10T W H L1 L2 P Q 1.60 ± 0.15 0.55 ± 0.10 0.30 ± 0.15 0.30 ± 0.15 0.64 ± 0.10 0.32 ± 0.10 ■Standard electrical specifications Resistance Type Rated Power at 70˚C Max. Working Voltage Max. Overload Voltage T.C.R. (ppm/˚C) RTN02-10T 1 W 16 25V 50V ± 20 J(± 5%) E-12 33Ω~1MΩ Number of Terminals Number of Resistors Operating Temperature Range 10 8 -55˚C ~+125˚C ■EXPLANATION OF PART NUMBERS (EX) RTN 02 10 T Type Size Chip Resistors Networks 02 Number of Circuits Circuit Structure 10 (see above) 103 J TP Nominal Resistance Resistance Tolerance TP: Taping(Paper) • 3-Digit: E12 Series Ex 10Ω=100 1KΩ=102 Packing J = ± 5% T : Sn(Ti) Process 76 Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before your order and/or use. • RTN02-10T ■CHARACTERISTICS Item 5% Test Method Temperature Cycling ± (1.0% + 0.05Ω) JIS-C5202-7.4 Cycle between -55˚C and +125˚C for 5 cycles Low Temperature Operation ± (1.0% + 0.05Ω) MIL-R-55342-D 4.7.4 Followed by 45 Minutes of RCWV. Short Time Overload ± (2.0% + 0.10Ω) JIS-C5202-5.5 Apply rated voltage 2.5 times for 5 seconds Resistance to Soldering Heat ± (1.0% + 0.10Ω) JIS-C5202-6.10 Immerse for 10 sec. in solder at 260 ± 3˚C Loading Life in Moisture ± (2.0% + 0.10Ω) JIS-C5202-7.9 40˚C, 1000Hrs at RCWV, 1.5Hr ON, 0.5Hr OFF Resistance to dry heat ± (2.0% + 0.10Ω) JIS-C5202-7.2 96Hrs at 125˚C Load Life ± (3.0% + 0.10Ω) JIS-C5202-7.10 70˚C, 1000Hrs at RCWV, 1.5Hr ON, 0.5Hr OFF Solderability Coverage JIS-C5202-6.11 Immerse for 3 sec. in solder at 245 ± 3˚C 95% JIS-C5202-5.7 Apply 300VAC for 1min No short or burned on the appearance Dielectric Withstanding Voltage *RCWV=Rated Continuous Working Voltage ■TAPING SPECIFICATIONS Carrier Tape ¿1.5 +0.1 +0 T2 T2 P0 E B F W A P P1 PAPER CARRIER DIRECTION OF FEED ■PACKAGING: TP Unit: mm Type A B W E F P0 P P1 T1 T2 RTN02-10T 3.5 ± 0.2 1.9 ± 0.2 8.0 ± 0.2 1.75 ± 0.1 3.5 ± 0.1 4.0 ± 0.1 4.0 ± 0.1 2.0 ± 0.1 - 0.75 ± 0.10 ■REEL SPECIFICATION Unit: mm Type W RTN02-10T 12.5 178 2.0 13.5 21.0 60.0 ± 1.5 ± 2.0 ± 0.5 ± 0.5 ± 0.5 ± 2.0 B C D M A B C D M A ■BULK CASE W Unit: pcs Type TP TE RTN02-10T 5,000 - Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before your order and/or use. 77 CHIP RESISTORS T1 EMBOSSED CARRIER