THRU-HOLE POWER INDUCTORS AIUR-10 SERIES | | | | | | | | | | | | | | | OPTIONS: • Bulk Pack is standard FEATURES: • Ferrite core with heat shrink tube • High Reliability APPLICATIONS: • Electronic Appliance • Noise Filtering STANDARD SPECIFICATIONS (Continued): Part Number AIUR-10 100K 120K 150K 180K 220K 270K 330K 390K 470K 560K 680K L (µH) R DC (Ω) Max I DC (A) Max Part Number AIUR-10 10 12 15 18 22 27 33 39 47 56 68 0.08 0.09 0.10 0.12 0.13 0.14 0.15 0.16 0.23 0.26 0.27 2.45 2.30 2.00 1.80 1.67 1.59 1.27 1.19 1.16 1.08 1.02 820K 101K 121K 151K 181K 221K 271K 331K 391K 471K 561K L (µH) R DC (Ω) Max I DC (A) Max Part Number AIUR-10 82 100 120 150 180 220 270 330 390 470 560 0.31 0.44 0.50 0.58 0.65 0.85 0.99 1.12 1.26 1.68 1.88 0.86 0.77 0.73 0.59 0.55 0.45 0.41 0.35 0.32 0.28 0.24 681K 821K 102K 122K 152K 182K 222K 272K 332K 392K L (µH) R DC (Ω) Max I DC (A) Max 680 820 1000 1200 1500 1800 2200 2700 3300 3900 2.18 2.71 3.01 3.41 4.00 6.12 6.98 7.97 11.8 13.0 0.23 0.21 0.20 0.18 0.17 0.16 0.16 0.16 0.15 0.14 PHYSICAL CHARACTERISTICS: 0.30±0.02 7,5±0,50 Ø0.32±0.02 Ø8,0±0,5 0.20±0.04 5,0±1,0 0.197 5,00 Ø0.024 Ø0,60 TECHNICAL INFORMATION: ABRACON IS ISO 9001 / QS 9000 CERTIFIED rev1.1-8/04 • Test frequency: 10µH-82µH = 2.52 MHz 100µH-3900µH = 1 KHz • Tolerance: K=±10% • Letter suffix indicates standard tolerance • Temperature: -40°C to +125°C with no load -40°C to +85°C with full rated current • Marking: Value and tolerance • L drops 10% typical @ IDC from initial value • Check SCD for detail E&M specification 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com