TEMPERATURE COMPENSATED CLOCK OSCILLATOR Pb RoHS Compliant ASTX-01H FEATURES: • SMD package makes reflow soldering possible • TTL / HCMOS 11.4 x 9.6 x 4.0 mm | | | | | | | | | | | | | | | APPLICATIONS: • Standard OSC for exact equipment • Portable radio equipment • Car telephone • Base clock STANDARD SPECIFICATIONS: PARAMETERS ABRACON P/N Frequency Range Operating Temperature Storage Temperature Frequency stability vs. Temperature vs. Supply Voltage vs. Load vs. Aging vs. Initial Tolerance Frequency adjustment (Internal Trimmer) Supply voltage (VDD) Supply current (Icc) Output Level (VOH) Output Level (VOL) Output Load Output wave form Jitter (pk-pk) Phase noise Start-up time: ASTX-01H 2.000MHz to 30.000MHz -30°C to + 75°C (see options below) -40°C to + 85°C ±2.5 ppm ( see options below) ±0.5ppm max./ Vdd ±5% ±0.2 ppm max./ Load ±10% ±1 ppm/yr max. ±0.5 ppm at +25°C ±3.0ppm 5 Vdc ± 5% 20mA max. 0.9*Vdd min. 0.1*Vdd min. 10TTL or 15pF TTL/HCMOS 40ps max. -120dBc/Hz @ 100Hz -140dBc/Hz @ 1KHz -145dBc/Hz @ 10KHz -150dBc/Hz @ 100KHz 10ms max. OPTIONS & PART IDENTIFICATION: (Left blank if standard) ASTX - 01H - Frequency - Frequency XX.XXXXXMHz Temp. Range 0°C to +50°C -10°C to +60°C -10°C to +70°C -20°C to +70°C -30°C to +60°C -30°C to +70°C -30°C to +75°C -40°C to +80°C -40°C to +85°C ABRACON IS ISO 9001 / QS 9000 CERTIFIED ±1.5ppm I15 D15 - T Temperature & Frequency Stability ±2.0ppm ±2.5 ppm ±3.0 ppm ±3.5 ppm I20 I25 I30 I35 D20 D25 D30 D35 C20 C25 C30 C35 E20 E25 E30 E35 H25 H30 H35 F25 F30 F35 STD N30 N35 M35 L35 Packaging Tape and Reel (1000pcs/reel) ±4.0 ppm ±4.5 ppm I40 I45 D40 D45 C40 C45 E40 E45 H40 H45 F40 F45 N40 N45 M40 M45 L40 L45 ±5.0 ppm I50 D50 C50 E50 H50 F50 N50 M50 L50 Visit www.abracon.com for Terms & Conditions of Sale Revised: 09.19.07 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com TEMPERATURE COMPENSATED CLOCK OSCILLATOR Pb RoHS Compliant ASTX-01H 11.4 x 9.6 x 4.0 mm | | | | | | | | | | | | | | | OUTLINE DRAWING: TOP VIEW SIDE VIEW BOTTOM VIEW Note: It is recommended to use an approximately 0.01uF bypass capacitor between PIN 4 and 6. PIN 1 2 3 4 5 6 FUNCTION Output GND NC Vcc GND / Case GND / Case Dimensions: Inches (mm) TAPE & REEL: Dimensions: mm ABRACON IS ISO 9001 / QS 9000 CERTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 09.19.07 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com