A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. Package Dimension: Part NO. Housing Emitting Color Lens Color AL-01S7IR1WW-A80 ---- Infrared White Diffused Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25mm (.010”) unless otherwise noted. 3. Protruded resin under flange is 1.0mm(.04”) max. 4. Lead spacing is measured where the leads emerge from the package. 5. Specifications are subject to change without notice. 6. This data-sheet only valid for six months. Part No. AL-01S7IR1WW-A80 Spec No. Page 1 of 6 2007/4/23 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. Absolute Maximum Ratings at Ta=25℃ Parameter Symbol MAX. Unit Forward Current IF 350 mA Peak pulsed forward current IPF 500 mA Power Disspation PD 1 W Reverse Voltage VR 5 V Operating Temperature Range Topr -40 to +85 ℃ Storage Temperature Range Tstg -40 to +85 ℃ Soldering Temperature (Max.) Tsol 260 ± 5 seconds Part No. AL-01S7IR1WW-A80 Spec No. Page 2 of 6 2007/4/23 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. Electrical Optical Characteristics at Ta=25℃ Parameter Symbol Min. Typ. Max. Radiated Output Power PO 60 70 --- Forward Voltage VF 1.4 1.6 --- V IF=350mA Dominant Wavelength λp --- 850 --- nm IF=350mA △λ1/2 --- 25 --- nm IF=350mA Temperature Coefficient or Dominant Wavelength △λd /△Tj --- 0.04 --- nm/℃ IF=350mA Temperature Coefficient of VF △VF /△Tj --- -2.0 --- mV/℃ IF=350mA ---- --- 15 --- ℃/W IF=350mA 2θ1/2 --- 180 --- Deg IF=350mA Spectral Half-Width Termal Resistance Junction to Board Viewing Angle Part No. AL-01S7IR1WW-A80 Spec No. Unit Test Condition mW/sr IF=350mA Page 3 of 6 2007/4/23 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. Reliability test items and conditions : NO 1 2 ITEM Solder Heat Temperature Cycle Test Conditions Temp：260℃±5℃ -40℃ 30min -25℃ 5min -105℃ 30min -25℃ 5min -40℃ 5min Sample Q’ty Ac/Re 5 sec 30 pcs 0/1 100 cycles 30 pcs 0/1 20 cycles 30 pcs 0/1 Test hours/cycle 3 Thermal Shock 4 High Temperature Storage Temp：85℃ 1000 hrs 30 pcs 0/1 5 Low Temperature Storage Temp：-35℃ 1000 hrs 30 pcs 0/1 6 DC Operating Life IF=350mA 1000 hrs 30 pcs 0/1 7 High Temperature／ High Humidity Ta=60℃ R.H 90% 1000 hrs 30 pcs 0/1 Part No. -105℃ 5min AL-01S7IR1WW-A80 Spec No. Page 4 of 6 2007/4/23 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. Typical electro-optical characteristics curves : Part No. AL-01S7IR1WW-A80 Spec No. Page 5 of 6 2007/4/23 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. Time-Iv deacy rate 100% Iv deacy rate (%) 90% 80% 70% 60% 50% 40% 30% 20% 10% 0 16 72 168 504 1008 Time (hrs) Part No. AL-01S7IR1WW-A80 Spec No. Page 6 of 6 2007/4/23