A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS 0805 Package Chip Infrared LED Part Number: IR17-21C Package outlines & Re-flow Profile Reflow Temp/Time Soldering iron Basic spec is U 5sec when 260℃. If temperature is higher, time should be shorter (+10℃Æ -1sec ).Power dissipation of iron should be smaller than 15W, and temperatures should be controllable .Surface temperature of the device should be under 230℃ . For Reflow Soldering ITEM MATERIALS Resin (mold) Epoxy Lens color Water Clear Printed circuit board BT Dice GaAlAs Emitted color Infrared NOTES: 1. All dimensions are in millimeters (inches); 2. Tolerances are ±0.1mm (0.004inch) unless otherwise noted. 2006/9/28 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Part Number: IR17-21C ELECTRO-OPTICAL CHARACTERISTICS Test Condition Symbol Parameter Viewing angle at 50% IV Forward voltage (TA=25℃) IF=10mA (Typ.) Value Unit 160 Deg 2θ1/2 1.20 IF=20mA VF IF=20mA IV Wavelength IF=20mA λp 940 nm Spectral Line Half-Width IF=20mA △λ 45 nm IFP 1.0 A Radiant Intensity (Max.) (Min.) (Typ.) Peak pulsing current (1/10 duty f=1kHz) 1.50 0.20 0.80 Absolute maximum ratings Parameter V mW/sr (TA=25℃) Symbol Value Unit Forward current IF 65 mA Reverse voltage VR 5 V Reverse current IR 100 µA Power Dissipation PD 130 mW Operating temperature range Top -25 ~+85 ℃ Storage temperature range Tstg -40 ~+100 ℃ Lead soldering temperature 260℃ For 5 Seconds 2006/9/28 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Part Number: IR17-21C Test items and results of reliability ＊Refer to reliability test standard specification for in this line. 2006/9/28 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Part Number: IR17-21C Typical Optical-Electrical Characteristic Curves 2006/9/28 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Part Number: IR17-21C Typical Optical-Electrical Characteristic Curves 2006/9/28