Tel : Fax : email : 0044 (0) 118 979 1238 0044 (0) 118 979 1283 [email protected] ACT9211 LVPECL or LVDS Clock Oscillator The ACT9211 7x5mm LVPECL/ LVDS Oscillator is a miniature low profile device allowing for frequencies up to 200.0MHz to be available in a 7X5 mm SMD package utilising fundamental and 3rd overtone crystals and without employing a multiplier. The metal lid is grounded through the ceramic package and the pads are gold plated. This device is particularly suited to Communications Wireless & Networking applications and also to many other applications where an LVPECL or LVDS output is desirable. These competitively priced devices are available packaged as loose or taped and reeled parts, to suit both low and higher volume requirements. Specification Parameter Symbol Frequency Operating Temp Range Storage Temp Range Frequency Stability f0 Topt Tstg Δf/f0 Duty Cycle Output Supply Voltage Supply Current (max) Output Level ‘0’ Output Level ‘1’ Output Differential Voltage Offset Voltage Output Load Tw/t Output Enable High Output Enable Low Rise & Fall Time (max) Start-up Time Aging Phase Jitter Period Jitter (rms) Period Jitter(pk-pk) VDD IDD VOL VOH N/CL Specification Condition Please specify Please specify 9.5000MHz ~ 200.00MHz 0~+70ºC /-10~+70°C /-20~+70°C / -40~+85ºC -55ºC~+125ºC ±20,±30,±50 or ±100ppm ( Inclusive of Operating Temperature, Range, Supply Voltage & Load ) 50±10% Std, 50±5% Optional ( 50% of Waveform) LVPECL LVDS 2.5VDC ±5% & 3.3V ±5% 2.5VDC ±5% & 3.3V ±5% 65mA max (2.5V ), 80mA max (3.3V) 45mA max (2.5V ), 55mA max (3.3V) VDD-1.620V max 1.1V max VDD-1.025V min 1.4V min 247~454mV, 350mv Typical 1.125~1.375V, 1.2V Typical VDD-2.0V DC to 50Ω 100Ω Differential Load Part Code SX Enable High Disable low Tr/Tf Tosc Fa Part code SC # Enable Low Disable high Part code SC Enable High Disable Low Please specify Please specify Please specify # : Not for new designs No connection(default) No connection(default) @20~80% of Waveform 700pS Typical, 1.5nS max 10mS max ±3ppm/year max 0.7ps typical 1.0ps max 2.0ps typical 3.0ps max 20ps typical 25ps max Complementary Output Please specify @ 25ºC (12kHz ~ 20MHz ) Pad Surface Finish : Au over Ni TAPE AND REEL SPECIFICATION Standard Reel Size 1K pieces Please note that all parameters can not necessarily be specified in the same device Customer to Specify : Frequency, Frequency Stability, Voltage, Operating Temperature Range, LVPECL or LVDS & Duty Cyc In line with our ongoing policy of product evolvement and improvement, the above specification may subject to change without notice ISO9001:2000 Registered For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com Issue : 4 SKr Date : 13/2/08