DATA SHEET Part Number: SL10 15002 Ordering Different Lead Types: Inside Kinked Leads Outside Kinked Leads Use -A after Ametherm’s part # Use -B after Ametherm’s part # For example: to order an inside kinked lead use part number SL10 15002-A D D D T C B L S S S STRAIGHT LEADS OUTSIDE KINKED LEADS INSIDE KINKED LEADS Electrical Specifications: Mechanical Specifications: Resistance @ 25°C Max Steady State Current Up to 65°C Max Recommended Energy Rating (Joules) Actual Failure Point of Instantaneous Energy (Joules) Resistance @ 100% of Max Current Resistance @ 50% of Max Current Body Temperature @ 100% Current Rating Dissipation Constant Thermal Time Constant Material Type Max Recommended Capacitance @ 120VAC/240VAC 15.0 Ω ± 20% 2.0 A 17.0 J 40.0 J 0.470 Ω 0.890 Ω 125 °C 12.0 mW/°C 35 seconds “G” 1100µF/ 300µF CSA File Number: #CA118061 D T Lead Diameter S L Straight Lead Coating Run Down B C 10.0 ± 0.5 mm 5.0 ± 0.5 mm 0.8 ± 0.1 mm 7.8 ± 1.0 mm 12.7 ± 1.0 mm 3.50 ± 0.3 mm 5.5 ± 0.50 mm 2.2 ± 0.3 mm Revision Date: April 13, 2005 Ametherm, Inc. 3111 N. Deer Run Road #4 Carson City, NV 89701 Telephone: (800) 808-2434 (775) 884-2434 Fax: (775) 884-0670 www.ametherm.com