AS1360 Product Brief 1 . 5 µ A L o w - P o w e r, P o s i t i v e Vo l ta g e R e g u l a t o r 1 General Description 2 Key Features The AS1360 low-power, positive voltage regulator was designed to deliver up to 250mA while consuming only 1.5µA of quiescent current. The device is available in fixed output voltages of 1.8, 2.5, 3.0, 3.3, and 5.0V. ! Low Quiescent Current: 1.5µA ! Input Voltage Range: Up to 20V The device features integrated short-circuit and overcurrent protection. ! Low Dropout Voltage - 250mV @ 100mA - 400mV @ 200mA The wide input voltage range, low-dropout voltage, and high-accuracy output voltage makes the device perfectly suited for 2- and 3-cell battery-powered and portable applications. The low dropout voltage (650mV) prolongs battery life and allows high current in small applications when operated with minimum input-to-output voltage differentials. The device features very stable output voltage (using only 1µF tantalum or aluminum-electrolytic capacitors), strict output voltage regulation tolerances (±0.5%), and excellent line-regulation. The AS1360 is available in a 3-pin SOT23 package. ! Fixed Output Voltages: 1.8, 2.5, 3.0, 3.3, 5.0V ! High Output Current: 250mA (VOUT = 5.0V) ! High-Accuracy Output Voltage: ±1.5% ! Exceptional Line Regulation: 0.1%/V ! Low Temperature Drift: ±100ppm/ºC ! Integrated Short-Circuit and Overcurrent Protection ! 3-pin SOT23 Package 3 Applications The device is ideal for mobile phones, PDAs, digital cameras, smart battery packs, battery-powered alarms, solar-powered instruments, intelligent instruments, CO2 and smoke detectors, CPU power supplies, and any battery-powered application. Figure 1. Block Diagram 3 2 VIN VOUT Short-Circuit Protection + – Voltage Reference AS1360 GND www.austriamicrosystems.com 1 Revision 1.00 1-2 AS1360 Product Brief Copyrights Copyright © 1997-2007, austriamicrosystems AG, Schloss Premstaetten, 8141 Unterpremstaetten, Austria-Europe. Trademarks Registered ®. All rights reserved. The material herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner. All products and companies mentioned are trademarks or registered trademarks of their respective companies. Disclaimer Devices sold by austriamicrosystems AG are covered by the warranty and patent indemnification provisions appearing in its Term of Sale. austriamicrosystems AG makes no warranty, express, statutory, implied, or by description regarding the information set forth herein or regarding the freedom of the described devices from patent infringement. austriamicrosystems AG reserves the right to change specifications and prices at any time and without notice. Therefore, prior to designing this product into a system, it is necessary to check with austriamicrosystems AG for current information. This product is intended for use in normal commercial applications. Applications requiring extended temperature range, unusual environmental requirements, or high reliability applications, such as military, medical life-support or lifesustaining equipment are specifically not recommended without additional processing by austriamicrosystems AG for each application. For shipments of less than 100 parts the manufacturing flow might show deviations from the standard production flow, such as test flow or test location. The information furnished here by austriamicrosystems AG is believed to be correct and accurate. However, austriamicrosystems AG shall not be liable to recipient or any third party for any damages, including but not limited to personal injury, property damage, loss of profits, loss of use, interruption of business or indirect, special, incidental or consequential damages, of any kind, in connection with or arising out of the furnishing, performance or use of the technical data herein. No obligation or liability to recipient or any third party shall arise or flow out of austriamicrosystems AG rendering of technical or other services. Contact Information Headquarters austriamicrosystems AG A-8141 Schloss Premstaetten, Austria Tel: +43 (0) 3136 500 0 Fax: +43 (0) 3136 525 01 For Sales Offices, Distributors and Representatives, please visit: http://www.austriamicrosystems.com/contact www.austriamicrosystems.com Revision 1.00 2-2