ANADIGICS AIT1005

AIT1005
PicoTunerTM
Complete Integrated Data Tuner
Product Brief - Rev 1
FEATURES
• Complete Integrated RF Tuner Front End
• Up Converter, Down Converter, Dual PLL,VCOs,
SAW Filter and Discrete Passive Components
Integrated in Package
• No External Components or Tuning Required
• 38 dB Gain, Flat Response over Input Band
• AGC Response Repeatable and Stable over
Temperature
• -85 dBc Phase Noise (10 KHz offset)
• Better than -50 dBc Image Rejection
• 3 Wire Serial Programming
• Small Footprint
• DOCSIS Compliant
• -40°C to +85°C
APPLICATIONS
•
•
•
•
•
M6 Package
40 Pin 22x22mm
Surface Mount
Cable Modems
CATV Data Tuner
Set Top Box
Home Gateway
PC Add-on Card or Motherboard
PRODUCT DESCRIPTION
The AIT1005 PicoTunerTM is a complete integrated
data tuner that includes all the necessary RF tuner
front end circuitry for cable modem applications. The
AIT1005 combines GaAs and Silicon CMOS
technology - which include the up converter, down
converter and dual synthesizer circuits - along with a
SAW filter, VCO tuning circuits, and passive
RF Input
from
Diplexer
52 MHz to
870 MHz
AIT1005
PicoTunerTM
components, to facilitate a complete double
conversion tuner architecture. The AIT1005 is offered
in a 40 lead package and requires one +5V supply,
plus a low-power +28V supply for varactor tuning. It
is well suited for applications that require complete,
low cost, small size, high performance RF modules.
43.75 MHz
IF SAW
Filter
Post
AGC
Amp
Figure 1: Tuner Downstream Path
08/2001
Cable
Modem
PHY