AMT8210 1.25 Gb/s 1310/1550nm PIN-TIA FEATURES • 1.25 Gb/s differential output TIA • DC to 1000 MHz bandwidth • +3.3V Operation • -27dBm Typical sensitivity • 1250-1620nm PIN Photodetector • Automatic Gain Control (AGC) • 0dBm Optical Overload APPLICATIONS • Gigabit Ethernet (1.25 Gb/s) • Fiber Channel (1.0625 Gb/s) • FTTx systems TO-46 4 pin Ball Lens Package TO-46 5 pin Ball Lens Package Product Description The ANADIGICS AMT8210, packaged in a TO46 lens can, is a 3.3V integrated photodetector and transimpedance amplifier (TIA) used to convert a long wavelength (1250 to 1620nm) optical input signal into a differential output voltage. The AMT8210 has a bandwidth of 900MHz and a dynamic range of over 27dB. These devices are readily designed into receivers, transceivers and transponders for Gigabit Ethernet and Fiber Channel applications. VPD VCC AGC OUT OUTQ GND (For the 4 pin header VPD and VCC are connected to the same pin) Figure 1: Functional Block Diagram AMT8210 ELECTRICAL CHARACTERISTICS Table 1: Absolute Maximum Ratings PARAMETER Supply Voltage Optical Input Power Storage Temperature MIN -0.5 - 40 MAX +3.8 +3 + 125 UNIT V dBm oC Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability. Table 2: Electrical Specifications PARAMETER Wavelength Detector Active Area Sensitivity (1) Overload Responsivity 1550nm Responsivity 1310nm MIN 1250 -25.0 - TYP 75 -27 0 0.95 0.85 9.1 MAX 1620 - 1000 50 - Small signal transimpedance gain (50 Ω) Small signal 3dB bandwidth Output resistance Output voltage swing (differential) TIA supply voltage TIA supply current Power consumption 2.97 - 3.3 21 70 Operating temperature -40 +25 800 500 3.6 +85 UNIT nm um dB dBm A/W A/W KΩ MHz Ω mVP-P V mA mW oC (1) 1.25Gb/s PRBS 231-1, 1550nm, ER >12dB, BER 10-10 Figure 2: Pin location (4-pin) Figure 3: Pin location (5-pin) GND GND OUTQ Table 3: Pin description NAME OUT VCC OUTQ GND OUT DESCRIPTION TIA Output (Non-Inverted) Supply Voltage (+3.3V) TIA Output (Inverted) Ground OUT OUTQ VCC VPD (Bottom View) VCC (Bottom View) Rev 1.1 2 AMT8210 PACKAGE DIMENSIONS – 5 Pin TO-46 Rev 1.1 3 AMT8210 PACKAGE DIMENSIONS – 4 Pin TO-46 ORDERING INFORMATION Part Number AMT8210T46L4 AMT8210T46L5 ANADIGICS, Inc. 829 Flynn Road Camarillo, California 93012, U.S.A. Tel: +1 (805) 445-4500 Fax: +1 (805) 445-4502 URL: http://www.anadigics.com E-mail: [email protected] PACKAGE DESCRIPTION 4 pin TO-46 Lens Package 5 pin TO-46 Lens Package IMPORTANT NOTICE ANADIGICS, Inc. reserves the right to make changes to its products or discontinue any product at any time without notice. The product specifications contained in Advanced Product Information sheets and Preliminary Data sheets are subject to change prior to a product’s formal introduction. Information in Data Sheets have been carefully checked and are assumed to be reliable; however, ANADIGICS assumes no responsibility for inaccuracies. ANADIGICS strongly urges customers to verify that the information they are using is current before placing orders. WARNING ANADIGICS products are not intended for use in life support appliances, devices, or systems. Use of an ANADIGICS product in any such application without written consent is prohibited. Rev 1.1 4