STPS40L15CW Vishay High Power Products Schottky Rectifier, 2 x 20 A FEATURES • • • • • • 125 °C TJ operation (VR < 5 V) Center tap module Optimized for OR-ing applications Ultra low forward voltage drop High frequency operation High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance • Guard ring for enhanced ruggedness and long term reliability • Designed and qualified for industrial level Base common cathode 2 1 3 Anode Anode 2 1 2 Common cathode TO-247AC DESCRIPTION The STPS40L15CW center tap Schottky rectifier module has been optimized for ultra low forward voltage drop specifically for the OR-ing of parallel power supplies. The proprietary barrier technology allows for reliable operation up to 125 °C junction temperature. Typical applications are in parallel switching power supplies, converters, reverse battery protection, and redundant power subsystems. PRODUCT SUMMARY IF(AV) 2 x 20 A VR 15 V IRM 600 mA at 100 °C MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) CHARACTERISTICS VALUES Rectangular waveform VRRM UNITS 40 A 15 V IFSM tp = 5 µs sine 700 A VF 19 Apk, TJ = 125 °C (per leg, typical) 0.25 V - 55 to 125 °C STPS40L15CW UNITS 15 V TJ VOLTAGE RATINGS PARAMETER SYMBOL Maximum DC reverse voltage VR Maximum working peak reverse voltage VRWM TEST CONDITIONS TJ = 100 °C ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current See fig. 5 SYMBOL per leg per device IF(AV) TEST CONDITIONS 50 % duty cycle at TC = 86 °C, rectangular waveform VALUES UNITS 20 40 A Maximum peak one cycle non-repetitive surge current per leg See fig. 7 IFSM Non-repetitive avalanche energy per leg EAS TJ = 25 °C, IAS = 2 A, L = 5 mH 10 mJ Repetitive avalanche current per leg IAR Current decaying linearly to zero in 1 µs Frequency limited by TJ maximum VA = 1.5 x VR typical 2 A Document Number: 93480 Revision: 21-Aug-08 5 µs sine or 3 µs rect. pulse 10 ms sine or 6 ms rect. pulse Following any rated load condition and with rated VRRM applied For technical questions, contact: [email protected] 700 330 www.vishay.com 1 STPS40L15CW Vishay High Power Products Schottky Rectifier, 2 x 20 A ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS 19 A Maximum forward voltage drop per leg See fig. 1 VFM (1) TJ = 25 °C 40 A 19 A TJ = 125 °C 40 A Reverse leakage current per leg See fig. 2 IRM (1) Threshold voltage VF(TO) Forward slope resistance rt Maximum junction capacitance per leg Typical series inductance per leg Maximum voltage rate of change Note (1) Pulse width < 300 µs, duty cycle < 2 % CT LS dV/dt TJ = 25 °C VR = Rated VR TJ = 100 °C TYP. MAX. - 0.41 - 0.52 0.25 0.33 0.37 0.50 - 10 - 600 TJ = TJ maximum VR = 5 VDC (test signal range 100 kHz to 1 MHz) 25 °C - Measured lead to lead 5 mm from package body 8 Rated VR UNITS V mA 0.182 V 7.6 mΩ 2000 pF - nH 10 000 V/µs THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS VALUES Maximum junction temperature range TJ - 55 to 125 Maximum storage temperature range TStg - 55 to 150 Maximum thermal resistance, junction to case per leg RthJC Maximum thermal resistance, junction to case per package Typical thermal resistance, case to heatsink RthCS DC operation See fig. 4 1.4 DC operation 0.7 Mounting surface, smooth and greased 0.24 Approximate weight Mounting torque Marking device www.vishay.com 2 minimum maximum Non-lubricated threads Case style TO-247AC (JEDEC) For technical questions, contact: [email protected] UNITS °C °C/W 6 g 0.21 oz. 6 (5) kgf · cm (lbf · in) 12 (10) STPS40L15CW Document Number: 93480 Revision: 21-Aug-08 STPS40L15CW 1000 1000 IR - Reverse Current (mA) IF - Instantaneous Forward Current (A) Schottky Rectifier, 2 x 20 A Vishay High Power Products 100 TJ = 125 °C TJ = 75 °C TJ = 25 °C 10 TJ = 100 °C 100 TJ = 75 °C TJ = 50 °C 10 TJ = 25 °C 1 0.1 1 0 0.2 0.4 0.6 0.8 1.2 1.0 1.4 0 1.6 3 6 9 12 15 VFM - Forward Voltage Drop (V) VR - Reverse Voltage (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage CT - Junction Capacitance (pF) 10 000 TJ = 25 °C 1000 100 0 5 10 15 20 VR - Reverse Voltage (V) ZthJC - Thermal Impedance (°C/W) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage 10 1 PDM t1 t2 0.1 Single pulse (thermal resistance) 0.01 0.00001 0.0001 0.001 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 0.01 Notes: 1. Duty factor D = t1/t2 2. Peak TJ = PDM x ZthJC + TC 0.1 1 10 100 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics Document Number: 93480 Revision: 21-Aug-08 For technical questions, contact: [email protected] www.vishay.com 3 STPS40L15CW 14 100 95 90 Square wave (D = 0.50) 85 80 75 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 12 Average Power Loss (W) Allowable Case Temperature (°C) Vishay High Power Products Schottky Rectifier, 2 x 20 A 10 8 RMS limit 6 4 DC 2 0 70 0 5 10 15 20 0 25 5 10 15 20 25 30 IF(AV) - Average Forward Current (A) Fig. 6 - Forward Power Loss Characteristics IFSM - Non-Repetitive Surge Current (A) IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current 1000 At any rated load condition and with rated VRRM applied following surge 100 10 100 1000 10 000 tp - Square Wave Pulse Duration (µs) Fig. 7 - Maximum Non-Repetitive Surge Current L D.U.T. IRFP460 Rg = 25 Ω Current monitor High-speed switch Freewheel diode + Vd = 25 V 40HFL40S02 Fig. 8 - Unclamped Inductive Test Circuit www.vishay.com 4 For technical questions, contact: [email protected] Document Number: 93480 Revision: 21-Aug-08 STPS40L15CW Schottky Rectifier, 2 x 20 A Vishay High Power Products ORDERING INFORMATION TABLE Device code STPS 40 L 15 CW - 1 2 3 4 5 6 1 - Schottky STPS series 2 - Current ratings (40 = 40 A) 3 - L = Low forward voltage 4 - Voltage code (15 = 15 V) 5 - Package: CW = TO-247 6 - None = Standard production PbF = Lead (Pb)-free Tube standard pack quantity: 25 pieces LINKS TO RELATED DOCUMENTS Dimensions http://www.vishay.com/doc?95223 Part marking information http://www.vishay.com/doc?95226 Document Number: 93480 Revision: 21-Aug-08 For technical questions, contact: [email protected] www.vishay.com 5 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1