Double Balanced Applications • Wideband Down Converters • Wideband Up Converters • Balanced Modulators • Bi-Phase Modulators • Phase Detectors Features • Extremely Wide IF Bandwidth • Good LO/RF Isolation • Multi-Octave Performance • Good Intercept Point • Miniature Size • Connectors Per MIL-C-39012 Outline Drawing Electrical Specifications Frequency Isolation LO-RF Convers. Loss VSWR, GHz dB Min/Typ dB Max/Typ Typ : 1 1.5 - 5.0 18/28 8.5/7.0 3.5 IF Freq.1 RF Power 2 LO Power MHz Input dBm dBm Nominal DC-1500 +4 +12 Aluminum Cased Connectorized Components Model 73126 Mixers RF Notes: Impedance: 50 ohms nominal. Meets MIL-E-5400 Class 3 requirements. Additional screening available for military and space applications. 1) Upper IF frequency is the -3 dB response point. 2) At 1dB Compression point Electrical and Mechanical Specifications subject to change without notice. NOTES: 1 Power (Bias terminal grounded) 2 Conversion loss measured at 60 MHz DC blocking capacitor (470 pF) built into I.F. output 3 External bias current limitation must be employed when using bias option. Use any positive supply voltage (up to +15V) by selecting required valve of current limiting resistor to optimize bias current. 4 Finish: Epoxy Primer (A160-16123-G001) Blue Epoxy Paint (A160-16221-G001) 5 Marking: Marking shall be in accordance with MIL-STD-130 6 Dimensions: Inches Sales Desk USA: Voice: (800) 544-2414 Fax: (315) 432-9121 Sales Desk Europe: Voice: (+44) 23 92 232392 Fax: (+44) 23 92 251369 6.6.25