)*()108&301&3"5*0/"-".1-*'*&3 CPA241 )551888"1&9.*$305&$)$0. "1&9 M I C R O T E C H N O L O G Y ABSOLUTE MAXIMUM RATINGS NOTE: SUPPLY VOLTAGE, +VS to –VS OUTPUT CURRENT, continuous INPUT VOLTAGE, differential INPUT VOLTAGE, common mode TEMPERATURE, junction 350V 60mA ±16V ±VS 150°C Refer to parent product data sheet PA241 for typical AC electrical characteristics, precautions, applications and other test parameters. DC WAFER PROBED SPECIFICATIONS PARAMETER TEST CONDITIONS1 MIN TYP OFFSET VOLTAGE, initial VS = ±50V BIAS CURRENT, initial COMMON MODE REJECTION VCM = ±90 V DC 84 VOLTAGE SWING IO = 40mA ±VS–12 SUPPLY CURRENT, quiescent VS = ±50 V 1.8 MAX UNITS 15 40 56 200 94 ±VS–10 2.1 2.3 mV pA dB V mA NOTES: 1. Unless otherwise stated VS = ±50 V, TA = 25°C, DC input specification ± value given. 2. Sample tested by wafer to 95%. DIE LAYOUT TYPICAL EXTERNAL CONNECTIONS 74 3* 7*/ 3' m74 3$3- Function Output Compensation Compensation Current Limit $$ * Required component and value if given. Optional balance components are recommended values. CC is NPO, rated for full supply voltage –VS to +VS. NOTE: Diagram for connection illustration only. All op amp configurations are possible. CAUTION Pad 1 2 3 4 Pad 5 6 8 9 Function +Vs -Vs +IN -IN The CPA241 is a MOSFET amplifier. ESD handling procedures must be observed Dimension: 154.5 x 117.5 ± 2.5 Mils. Thickness: 15 Mil (380µ). Backside Metal: None, Silicon. Bond pad: 5 Mil sq (127µ) AI. Make no connection to bond pads not listed by function. Note: The backside of the CPA241 die is isolated up to 500V. The top side walls of the CPA241 die are isolated up to 300V. Ordering Information: Order #: CPA241DI80: Die are only available in waffle packages with a total of 80 die per package. This data sheet has been carefullyCORPORATION checked and is believed to be reliable, however, no responsibility is assumed for possible• inaccuracies or omissions. All specifications subject to change without notice. APEX MICROTECHNOLOGY • TELEPHONE (520) 690-8600 • FAX (520) 888-3329 ORDERS (520) 690-8601 • EMAILare [email protected] CPA241 REV B OCTOBER 2006 © 2006 Apex Microtechnology Corp.