�������������������������� ������ �������������������������������������������������������������� � � � � � � � � � � � � � � � SG PARAMETER SYMBOL TEMP. POWER TEST CONDITIONS MIN MAX UNITS 2.5 30 36.4 31.6 50 50 50 mA mV mV mV pA pA pA 2.5 60 60 50 50 50 mA mV mV pA pA pA 3 36.5 42.9 38.1 50 50 50 mA mV mV mV nA nA nA 1 1 1 1 1 1 1 Quiescent Current Input Offset Voltage Input Offset Voltage Input Offset Voltage Input Bias Current, +IN Input Bias Current, –IN Input Offset Current IQ VOS VOS VOS +IB –IB IOS 25°C 25°C 25°C 25°C 25°C 25°C 25°C ±150V ±150V ±50V ±175V ±150V ±150V ±150V VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0 VIN = 0 VIN = 0 3 3 3 3 3 3 Quiescent Current Input Offset Voltage Input Offset Voltage Input Bias Current, +IN Input BiasCurrent, –IN Input Offset Current IQ VOS VOS +IB –IB IOS –40°C –40°C –40°C –40°C –40°C –40°C ±150V ±150V ±50V ±150V ±150V ±150V VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0 VIN = 0 VIN = 0 2 2 2 2 2 2 2 Quiescent Current Input Offset Voltage Input Offset Voltage Input Offset Voltage Input Bias Current, +IN Input Bias Current, –IN Input Offset Current IQ VOS VOS VOS +IB –IB IOS 125°C 125°C 125°C 125°C 125°C 125°C 125°C ±150V ±150V ±50V ±175V ±150V ±150V ±150V VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0, AV = 100 VIN = 0 VIN = 0 VIN = 0 4 4 4 4 4 4 Output Voltage, IO = 40mA Current Limits Stability/Noise Slew Rate Open Loop Gain Common Mode Rejection VO ICL EN SR AOL CMR 25°C 25°C 25°C 25°C 25°C 25°C ±52V ±30V ±150V ±150V ±150V ±102V RL = 1K RL = 100Ω RL = 5K, AV = 1, CL = 10nF, CC = 68pF RL = 5K, CC = 6.8pF RL = 5K, F = 15Hz RL = 5K, F = DC, VCM = ±90V 5 90 84 V mA mVrms V/µs dB dB 6 6 6 6 Output Voltage, IO = 40mA Slew Rate Open Loop Gain Common Mode Rejection VO SR AOL CMR –40°C –40°C –40°C –40°C ±52V ±150V ±150V ±102V RL = 1K RL = 5K, CC = 6.8pF RL = 5K, F = 15Hz RL = 5K, F = DC, VCM = ±90V 40 5 90 80 V V/µs dB dB 5 5 5 5 Output Voltage, IO = 30mA Slew Rate Open Loop Gain Common Mode Rejection VO SR AOL CMR 125°C 125°C 125°C 125°C ±50V ±150V ±150V ±102V RL = 1K RL = 5K, CC = 6.8pF RL = 5K, F = 15Hz RL = 5K, F = DC, VCM = ±90V 30 5 90 80 V V/µs dB dB A IN M I L E R P Y R 40 50 125 10 The PA241M is available ONLY in the CE (8-pin TO-3) package style. BURN IN CIRCUIT * ������� ���� ������� � � �� � � ����� � � ** ����� � � These components are used to stabilize device due to poor high frequency characteristics of burn in board. Internal power dissipation of approximately 2.1W at case temperature = 125°C. � � ��� ����� ���� This data sheet has been carefully checked and is believed to be reliable, however, no responsibility is assumed for possible• inaccuracies or omissions. All specifications subject to change without notice. APEX MICROTECHNOLOGY CORPORATION • TELEPHONE (520) 690-8600 • FAX (520) 888-3329 ORDERS (520) 690-8601 • EMAILare [email protected] PA241MU REV 3 JANUARY 2006 © 2006 Apex Microtechnology Corp. 1