AFC5-F SERIES Dual output • • • • • • Linear regulated outputs Very low output noise 2 x 1 x 0.375 inch package Six sided shielding Short circuit protection UL94V-0 case The AFC5-F Series of fixed frequency DC/DC converters provide 5 Watts of power, low output noise and tight output regulation, all housed within a 2 x 1 inch case. Six sided shielding to negate radiated noise and a non conductive base to prevent shorting to the PCB are standard features. Short circuit protection, isolation voltage of 500VDC, and a voltage accuracy of ±1% are included to offer the best possible solution to a system designer’s low power needs. Ideal applications for the AFC5-F are data acquisition, digital to analog and analog to digital conversion. AFC5-F Series DC/DC converters are suitable for a wide range of general industrial applications, especially where low noise levels are required. [ 2 YEAR WARRANTY ] SPECIFICATION All specifications are typical at nominal input, full load at 25°C unless otherwise stated OUTPUT SPECIFICATIONS EMC CHARACTERISTICS Voltage accuracy ±1.0% Voltage balance ±1%, max. Radiated emissions EN55022, EN55011, FCC GENERAL SPECIFICATIONS Line regulation LL to HL ±0.5%, max. Load regulation NL to FL ±0.5% Isolation voltage Input to output Total error band See Note 2 ±3.0% Switching frequency Fixed, See Note 3 Ripple and noise 5Hz to 20MHz 15mV pk-pk, typ., 1mV rms, typ. 30mV pk-pk, max. Efficiency 64% to 70% Case material 50% to 100% load step 20kHz, min. Meets UL94V-0 50µs, max. Weight Temperature coefficient 500VDC, min. Black anodised aluminium with non-conductive base Flammability rating Transient response Level A 30g (1.1oz) ±0.03%/°C, max. MTBF Minimum output current Dual output 580,000 hours 0A ENVIRONMENTAL SPECIFICATIONS Short circuit protection Output to common +output to –output Indefinite 10s, max. Thermal performance Operating, see curve 0°C to +105°C Non-operating –55°C to +125°C Derating See chart Cooling Free-air convection cooled Relative humidity Non-condensing LC filter Altitude Operating Non operating 10,000 feet max. 40,000 feet max. 7V, 10s 15V, 10s Vibration, See Note 4 5Hz to 500Hz 2.4G rms (approx.) INPUT SPECIFICATIONS Input voltage range 5VDC 12VDC 4.65V to 5.25VDC 10.8V to 13.2VDC Input filter Input overvoltage Reflected ripple current PAGE 1 No damage, 5V nominal No damage, 12V nominal 400mA pk-pk 5% to 95% RH SPECIAL APPLICATION MODELS | 5W DC/DC 5 Watt Nominal input DC/DC converters INPUT OUTPUT OUTPUT INPUT CURRENT TYPICAL MODEL VOLTAGE VOLTAGE CURRENT NO LOAD EFFICIENCY NUMBER 5VDC ±12VDC ±150mA 37mA 1.16A 65% AFC5-05D12-F 5VDC ±15VDC ±150mA 44mA 1.45A 65% AFC5-05D15-F 12VDC ±12VDC ±150mA 14mA 0.48A 65% AFC5-12D12-F 12VDC ±15VDC ±150mA 17mA 0.61A 65% AFC5-12D15-F FULL LOAD Notes 1 2 3 4 Maximum value at nominal line voltage. Error band is defined as the static output regulation at 25°C, including initial setting accuracy, input voltage within stated limits and output current within stated limits. Fixed frequency design provides for easier input filtering and better noise performance. Three orthogonal axes, random vibration, 10 minute test for each axis. (1) PIN CONNECTIONS PIN NUMBER DUAL OUTPUT 1 + Input 2 – Input 3 + Output 4 Common 5 – Output 80% CASE R 70% 0.375 Max. (9.500) 0.22 Min. (5.60) 0.040 Dia. (1.000) 60% 0.60 (15.20) 0.800 (20.300) 0.200 (5.100) 1 50% 0% 25% 50% 75% 100% OUTPUT LOAD Typical Efficiency V's Output Load (Nominal Input) 0.400 (10.200) 3 BOTTOM VIEW 4 0.100 0.500 (2.500) (12.700) 1.00 (25.40) 2 5 0.300 (7.600) 2.00 (50.80) ALL DIMENSIONS IN INCHES (mm) Tolerance .xx = ±0.02 .xxx = ±0.005 80% DERATING CURVE Output Power (Watts) 50°C 60°C 75°C 5W 70% Maximum Input Voltage Nominal Input Voltage Minimum Input Voltage NATURAL CONVECTION COOLING 60% 4.65 5.00 5.25 50% 10.8 12.0 13.2 INPUT VOLTAGE http://www.artesyn.com 0°C 10°C 20°C 30°C 40°C 50°C 60°C 70°C 80°C 90°C 100°C 110°C DS_AFC5-F Dual_20020807.PDF Typical Efficiency V's Input Voltage (Full Output Load) 105°C 0W PAGE 2