SIL10 Series Single output DC/DC CONVERTERS 8 to 33W Non-isolated DC/DC Converters 1 NEW Product • • • • • • Current rating of 10A Outputs of between 0.8V to 3.3V - fixed and flexible Applications for 5V or 3.3V input POL converters Highest power density available today (117W/in3) High efficiency - up to 96% achievable on 3.3 Vout POL converter that saves board space - vertical or horizontal versions • Industry standard footprint • Remote sense and remote ON/OFF The SIL10 series are non-isolated DC/DC converters packaged in a single-in-line footprint giving designers a cost effective solution for conversion from either a 5V or 3.3V input to output voltages of 0.8V to 3.3V. The SIL10 offers both fixed outputs and wide output trim range which allows maximum design flexibility and a pathway for future upgrades. Local voltage conversion by the SIL10 series from existing 5V or 3.3V system voltages eliminates the need for redesign of existing power architectures when voltage requirements change. The SIL10 is designed for applications that include distributed power, workstations, optical network and wireless applications. Implemented using state of the art surface mount technology and automated manufacturing techniques, the SIL10 offers compact size and efficiencies of up to 96%. 2 YEAR WARRANTY SPECIFICATIONS All specifications are typical at nominal input, full load at 25°C unless otherwise stated OUTPUT SPECIFICATIONS Voltage adjustability EMC CHARACTERISTICS Fixed output versions 5Vin with wide trim 3.3Vin with wide trim ±10% 3.6V to 0.8V 2.75V to 0.8V Setpoint accuracy ±2.7% Line regulation ±1.0% Load regulation ±1.0% Minimum load 0A Overshoot/undershoot None Ripple and noise 0 to 20MHz BW 50mV pk-pk 25mV rms max. Temperature co-efficient ±0.01%/ºC Transient response 50mV max. deviation 50µs recovery to within ±1.0% Remote sense 10% Vo compensation Input voltage range Input current (max.) Input current ripple Remote ON/OFF Start-up time 3.0 to 5.5VDC No load 70mA EN61000-4-2, IEC801-2 EN61000-4-6 EN61000-4-3 GENERAL SPECIFICATIONS Efficiency See table Insulation voltage Switching frequency Non-isolated Fixed 300kHz typ. Approvals and standards (pending) EN60950 UL/cUL60950 Material flammability UL94V-0 Dimensions (LxWxH) Pin length Vertical 50.8 x 7.8 x 12.7mm 2.0 x 0.31 x 0.5 inches 0.135 ±0.02 in (3.43 ±0.5mm) Weight 5g (0.18oz) MTBF INPUT SPECIFICATIONS Input current Electrostatic discharge Conducted immunity Radiated immunity Telecordia 332 7,042,000 ENVIRONMENTAL SPECIFICATIONS Thermal performance 8A max. @ Io max. and Vout = 3.3V Operating ambient, (See Note 4) Non-operating -40ºC to +100ºC -40ºC to +125ºC 65mA rms (See Note 3) International Safety Standard Approvals 20ms UL/cUL CAN/CSA 22.2 No. E174104 UL60950 file No. E174104 TÜV TÜV Product Service (EN60950) Certificate No. TBC. CB report and certificate to IEC60950 File Name: SIL10.PDF Rev: 02 Jan 2003 SIL10 Series Single output DC/DC CONVERTERS 8 to 33W Non-isolated DC/DC Converters 2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm OUTPUT POWER (MAX.) INPUT VOLTAGE OUTPUT VOLTAGE OUTPUT CURRENT (MIN.) OUTPUT CURRENT (MAX.) EFFICIENCY (TYP.) LINE LOAD MODEL NUMBER (1, 2) 36.3W 4.5V - 5.5V 3.3V 0A 10A 95% ±1% ±1% SIL10-05W3V3-V 36.3W 4.5V - 5.5V 3.3V 0A 10A 95% ±1% ±1% SIL10-05S3V3-V 27.5W 3.0V - 5.5V 2.5V 0A 10A 94% ±1% ±1% SIL10-05S2V5-V 22W 3.0V - 5.5V 2.0V 0A 10A 93% ±1% ±1% SIL10-05S2V0-V 19.8W 3.0V - 5.5V 1.8V 0A 10A 92% ±1% ±1% SIL10-05S1V8-V 16.5W 3.0V - 5.5V 1.5V 0A 10A 90% ±1% ±1% SIL10-05S1V5-V 13.2W 3.0V - 5.5V 1.2V 0A 10A 88% ±1% ±1% SIL10-05S1V2-V 11W 3.0V - 5.5V 1.0V 0A 10A 87% ±1% ±1% SIL10-05S1V0-V 8.8W 3.0V - 5.5V 0.8V 0A 10A 84% ±1% ±1% SIL10-05S0V8-V Notes 1 2 3 4 NEW Product REGULATION PROTECTION The part numbers with a W in the number sequence indicate a wide trim output. For the SIL10-05W3V3 the output voltage range is from 3.6V to 0.8V. The standard unit with the suffix '-V' is for vertical mounting. To order a unit with horizontal mounting, please add the suffix '-H' to the model number, e.g. SIL10-05S2V0-H. Referenced to ground for shutdown. If pin 6 is high unit will shutdown. If pin 6 is open unit will operate as normal. Converter is guaranteed OFF when control pin is greater than 1.2V. Full de-rating curves available in both the Long Form Data Sheet and Application Note 134. CAUTION: High internal temperatures. Ensure that unit is not user accessible. Short-circuit protection Continuous Thermal protection Automatic recovery EXTERNAL OUTPUT TRIMMING Output can be externally trimmed by using the method shown below. J1 PIN CONNECTIONS PIN NUMBER FUNCTION 1 +Vout 2 +Vout 3 Remote Sense (+) 4 +Vout 5 Ground J1 Pin 5 J1 Pin 5 TRIM UP J2 Pin 5 J2 Pin 5 10KΩ TRIMPOT TRIM DOWN J1 Pin 3 J1 Pin 3 J2 PIN CONNECTIONS PIN NUMBER FUNCTION 1 Ground 2 +Vin 3 +Vin 4 No Pin 5 Trim 6 Remote ON/OFF Please consult our website for the following items: ✔ Application Note ✔ Longform Data Sheet www.artesyn.com File Name: SIL10.PDF Rev: 02 Jan 2003 SIL10 Series Single output DC/DC CONVERTERS 8 to 33W Non-isolated DC/DC Converters 3 For the most current data and application support visit www.artesyn.com/powergroup/products.htm NEW Product PIN VIEW 2.000 ±0.020 (50.80 ±0.50) SIDE VIEW 0.500 (12.70) PCB 6 5 3 2 5 1 4 3 J2 0.316 ±0.008 (8.03 ±0.20) 2 1 J1 0.100 (2.54) 0.170 (4.32) 1.900 (48.26) 0.050 (1.27) Dimensions in Inches (mm) Tolerances (unless otherwise specified) 2 Place ±0.15 3 Place ±0.006 Figure 1: Mechanical Drawing - Horizontal Mount Version SIDE VIEW FRONT VIEW 0.307 ±0.008 (7.80 ±0.20) 2.000 ±0.020 (50.80 ±0.50) 0.500 (12.70) PCB 0.135 (3.43) 0.635 (16.13) 1 2 3 4 5 1 J1 0.168 (4.26) 2 3 J2 5 6 0.100 (2.54) 0.050 (1.27) 1.900 (48.26) Dimensions in Inches (mm) Tolerances (unless otherwise specified) 2 Place ±0.15 3 Place ±0.006 Figure 2: Mechanical Drawing - Vertical Mount Version Data Sheet © Artesyn Technologies® 2003 The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. Please consult our website for the following items: ✔ Application Note ✔ Longform Data Sheet www.artesyn.com File Name: SIL10.PDF Rev: 02 Jan 2003