10 Watts Total Power: Input Voltages: No. of Outputs: 10 Watts 12V Single and Dual AEE00-12Vin Electrical Specs Input Input range 9 to 18 VDC Efficiency 78% typical (3.3V) Output Special Features • • • • • • 10 W, Dual output 2:1 Input range 1.0" x 2.0" x 0.33 case Industry standard package Low Profile Low Cost Voltage tolerance Overall regulation Noise/ripple Transient response ±1.0% ±1% max 1% Typ, 2% Max 300 usec typical (50% step load change to within 3%Vo) Temperature Regulation ±0.02 %Vo/°C Switching frequency 330kHz Isolation I/O isolation 1500 VDC Input to Output 1000 VDC Input to Case 1000 VDC Output to Case Isolation Resistance 300 Mohms Environmental Operating base temperature range: -25°C to +100°C Storage temperature: -40°C to +125°C MTBF: 3 Million Hours (Belcore TR332) Safety 2 UL UL1950 Recognition CSA CSA22.2-950 Recognition TUV EN60950 Recognition North America (USA): 1-888-41-ASTEC Europe (UK): 44 (1384) 842-211Asia (HK): 852-2437-9662 AMERICAS EUROPE ASIA 5810 Van Allen Way Carlsbad, CA 92008 Telephone: 760-930-4600 Facsimile: 760-930-0698 Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX, UK Telephone: 44 (1384) 842-211 Facsimile: 44 (1384) 843-355 Units 2111-2116, Level 21 Tower1, Metroplaza 223, Hing Fong Road Fwai Fong, New Territories Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-4426 Ordering Information Input Voltage Output Voltage Efficiency Model Number 9-18 V 9-18 V 9-18 V 9-18 V 3.3V @ 2.55 A 5.0V @ 2 A 12V @ 0.84 A 15V @ 0.68 A 78% 81% 83% 84% AEE02F12-49 AEE02A12-49 AEE00B12-49 AEE00C12-49 9-18 V 9-18 V 9-18 V ±5V @ ± 1.0 A ±12V @ ±0.42 A ±15V @ ±0.33 A 81% 83% 84% AEE01AA12-4 AEE00BB12-4 AEE00CC12-4 NOTES: Enable Function "4" = positive logic enable Trim Feature "9" = Trim feature Mechanical Dimensions and Pin Assignments Notes: 1. 20 MHz bandwidth. An external 0.1 uf ceramic capacitor is recommended to be placed from +V out to comm. 2. All specifications are typical at nominal line, full load, and 25°C unless otherwise noted. 3. All specifications subject to change without notice. 4. Mechanical drawings are for reference only. www.astec.com 3