SUB610 Semiconductor Schottky Barrier Diode Features • • • • Small SMD package & 3chip array Low reverse current: IR=1 ㎂ Max. @ VR=30V Low power rectified High reliability Ordering Information Type No. Marking SUB610 61B Package Code SOT-363 Outline Dimensions unit : mm 0.65 Typ. 1 6 2 5 3 4 1.90~2.10 1.15~1.35 1 5 6 0.10 Max. 2 4 0.85~0.95 3 0.19 Max. 0.65 Typ. 0.30 Max. 1.95~2.25 0.25 Min. • PIN Connections 1, 2, 3: Cathode 4, 5, 6: Anode KSD-D5S004-000 1 SUB610 Absolute Maximum Ratings Ta=25°C Characteristic Symbol Rating Unit Reverse voltage VR 30 V Forward current IF 200 mA Peak forward surge current (Non-repetitive 60Hz sine wave) IFSM 2 A Power dissipation PD 200 mW TJ 150 °C Tstg -55 ~ 150 °C Junction temperature Storage temperature range ※ ※ Total rating Electrical Characteristics Characteristic Forward voltage Reverse current Total capacitance Ta=25°C Symbol Test Condition Min. Typ. Max. Unit VF ※ IF=10mA - - 0.4 V VF ※ IF=30mA - - 0.5 V IR ※ VR=30V - - 1 µA VR=1V, f=1MHz - 7.7 - pF CT ※ per each unit ※ Recommend PCB solder land (Unit : mm) KSD-D5S004-000 2 SUB610 Electrical Characteristic Curves (per each unit) Fig. 1 IF - VF ㎂ Fig. 2 IR - VR Fig. 3 CT - VR The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-D5S004-000 3