STA3250F Semiconductor PNP Silicon Transistor Applications • Power amplifier application • High current switching application Features • • • • Low saturation voltage: VCE(sat)=-0.15V Typ. @ IC=-1A, IB=-50mA Large collector current capacity: IC=-2A Small and compact SMD type package Complementary pair with STC4250F Ordering Information Type NO. Marking Package Code STA3250F HW1 SOT-89 Outline Dimensions unit : mm 2.40~2.70 1.20 Max. 1.15 Typ. 3.70~4.30 4 0.46 Max. 0.10 Max. 1.40~1.70 0.48 Max. 1 KSD-T5B005-000 1.15 Typ. 2 0.58 Max. 1.87 Max. 4.40~4.70 3 PIN Connections 1. Base 2,4. Collector 3. Emitter 1 STA3250F Absolute Maximum Ratings Characteristic [Ta=25℃] Unit Symbol Rating Collector-base voltage VCBO -50 V Collector-emitter voltage VCEO -50 V Emitter-base voltage VEBO -5 V IC -2 A PC 0.5 W PC※ 1 W TJ 150 °C Tstg -55~150 °C Collector current Collector Power dissipation Junction temperature Storage temperature range ※ Device mounted on ceramic substrate (recommandable minimum solder land) Electrical Characteristics Characteristic Symbol Collector-emitter breakdown voltage BVCEO IC=-1mA, IB=0 -50 - - V Collector cut-off current ICBO VCB=-50V, IE=0 - - -0.1 µA Emitter cut-off current IEBO VEB=-5V, IC=0 - - -0.1 µA hFE VCE=-2V, IC=-0.5A* 120 - 240 hFE VCE=-2V, IC=-1.5A* 40 - - Collector-emitter saturation voltage VCE(sat) IC=-1A, IB=-0.05A* - - -0.35 V Base-emitter saturation voltage VBE(sat) IC=-1A, IB=-0.05A* - - -1.2 V fT VCE=-2V, IC=-0.05A - 215 - MHz VCB=-10V, IE=0, f=1MHz - 24 - pF DC current gain Transition frequency Collector output capacitance Switching Time Cob Test Condition [Ta=25℃] Min. Typ. Max. Unit Turn-on Time ton - 100 - Storage Time tstg - 300 - - 50 - Fall Time tf < nS *: Pulse test : tP≤300µs, Duty cycle≤2% ※ Recommend PCB solder land [Unit: mm] KSD-T5B005-000 2 STA3250F Electrical Characteristic Curves Fig. 2 IC - VBE ㎽ Fig. 1 PC - Ta Fig. 3 IC - VCE Fig. 5 VCE(sat) - IC Fig. 4 hFE - IC Fig. 6 VBE(sat) - IC KSD-T5B005-000 3 STA3250F Electrical Characteristic Curves Fig. 7 COb - VCB Fig. 8 Safe Operating Area The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-T5B005-000 4