STA3350F Semiconductor PNP Silicon Transistor Applications • Power amplifier application • High current switching application Features • • • • Low saturation voltage: VCE(sat)=-0.15V Typ. @ IC=-1A, IB=-50mA Large collector current capacity: IC=-3A Small and compact SMD type package Complementary pair with STC4350F Ordering Information Type NO. Marking Package Code STA3350F HW7 SOT-89 Outline Dimensions unit : mm 2.40~2.70 1.20 Max. 1.15 Typ. 3.70~4.30 4 0.46 Max. 0.10 Max. 1.40~1.70 0.48 Max. 1 1.15 Typ. 2 0.58 Max. 1.87 Max. 4.40~4.70 3 KSD-T5B006-000 PIN Connections 1. Base 2,4. Collector 3. Emitter 1 STA3350F Absolute Maximum Ratings Characteristic [Ta=25℃] Unit Symbol Rating Collector-base voltage VCBO -50 V Collector-emitter voltage VCEO -50 V Emitter-base voltage VEBO -6 V IC -3 A PC 0.5 W PC※ 1 W TJ 150 °C Tstg -55~150 °C Collector current Collector Power dissipation Junction temperature Storage temperature range 2 ※ Device mounted on ceramic substrate (250mm ⅹ0.8t) Electrical Characteristics Characteristic Symbol Collector-emitter breakdown voltage BVCEO IC=-1mA, IB=0 -50 - - V Collector cut-off current ICBO VCB=-50V, IE=0 - - -1 µA Emitter cut-off current IEBO VEB=-6V, IC=0 - - -1 µA hFE VCE=-2V, IC=-0.5A* 120 - 240 hFE VCE=-2V, IC=-2A* 40 - - DC current gain Test Condition [Ta=25℃] Min. Typ. Max. Unit Collector-emitter saturation voltage VCE(sat) IC=-1A, IB=-0.05A* - - -0.35 V Base-emitter saturation voltage VBE(sat) IC=-2A, IB=-0.1A* - -0.97 -1.2 V VCE=-10V, IC=-0.05A - 250 - MHz VCB=-10V, IE=0, f=1MHz - 28 - pF - 100 - - 300 - - 50 - Transition frequency Collector output capacitance Switching Time fT Cob Turn-on Time ton Storage Time tstg Fall Time < tf ns *: Pulse test : tP≤300µs, Duty cycle≤2% ※ Recommend PCB solder land [Unit: mm] KSD-T5B006-000 2 STA3350F Electrical Characteristic Curves Fig. 2 IC - VBE ㎽ Fig. 1 PC - Ta Fig. 3 IC - VCE Fig. 5 VCE(sat) - IC Fig. 4 hFE - IC Fig. 6 VBE(sat) - IC KSD-T5B006-000 3 STA3350F Electrical Characteristic Curves Fig. 7 COb - VCB Fig. 8 Safe Operating Area The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-T5B006-000 4