QUARTZ PRESSURE AND TEMPERATURE TRANSDUCER PDTK-P-M APPLICATIONS The Quartz pressure transducer PDTK-P-M provides a precision pressure measurement with compensation of the temperature error in the operating temperature range. The remarkable performance of this transducer is achieved through the use of a precision quartz crystal resonator, whose resonance frequency varies with the pressure-induced stress, in combination with a quartz crystal temperature sensor, which allows a thermal compensation of the pressure sensor frequency, and to achieve high accuracy over a wide temperature range. FEATURES - Meteorological and barometric reference - Pressure calibration equipment - High accuracy pressure standard (0.06%FS) - Stainless steel case (optionally with titanium) OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS of the base model PARAMETERS Pressure range P Operating temperature range Pressure Accuracy Temperature Accuracy Temperature induced error in the operating temperature range Pressure resolution Temperature resolution Pressure signal output “4”. Frequency range Frequency Temperature signal output “3”. Frequency range output Output amplitude (min) on load of 600 Ohm Current consumption Supply voltage Size Weight Warranty period of maintenance Warranty period of storage from the date of manufacture SPECIFICATIONS UNITS 0 to 0.06(8.7); 0.1(14.5); … 40(5800) – 40 to + 80 0.06; 0.1; 0.15 0.05; 0.1; 0.3 <±1 0.02 0.01 300…3000 250…600 5 30 9 to 12 Ø 57 x 119 < 350 1 10 MPa (PSI) °C %FS %FS % %FS %FS Hz V mA V mm gm year year During a warranty period the repair of transducer is carried out by the manufacturer. PACKAGE DIMENSIONS UNITS: millimeters Increased view A A 52 57 M20x1.5 Temperature signal output 3 Pressure signal output 4 GND 1 V+ 99 GmbH & Co. KG Wasemweg 5 D-74821 Mosbach Germany 2 page 1(1) www.AXTAL.com fon: +49 (6261) 939834 fax: +49 (6261) 939836 E-mail: [email protected]